3GPP TSG-RAN2 Meeting #130 R2-2503413
Malta , MT, 19th –
6.3.3 UE capability information elements
– AccessStratumRelease
The IE AccessStratumRelease indicates the release supported by the UE.
AccessStratumRelease information element
-- ASN1START
-- TAG-ACCESSSTRATUMRELEASE-START
AccessStratumRelease ::= ENUMERATED {
rel15, rel16, rel17, rel18, spare4, spare3, spare2, spare1, ... }
-- TAG-ACCESSSTRATUMRELEASE-STOP
-- ASN1STOP
– AerialParameters
The IE AerialParameters is used to convey the capabilities supported by the UE for aerial operation.
AerialParameters information element
-- ASN1START
-- TAG-AERIALPARAMETERS-START
AerialParameters-r18 ::= SEQUENCE {
-- Support of Aerial UE features
aerialUE-Capability-r18 ENUMERATED {supported} OPTIONAL,
-- Support of altitude measurement and event H1/H2-triggered reporting
altitudeMeas-r18 ENUMERATED {supported} OPTIONAL,
-- Support of altitude based measurement configuration of SSB-ToMeasure
altitudeBasedSSB-ToMeasure-r18 ENUMERATED {supported} OPTIONAL,
-- Support of events A3H1, A3H2, A4H1, A4H2, A5H1, A5H2
eventAxHy-r18 ENUMERATED {supported} OPTIONAL,
-- Support of flight path reporting
flightPathReporting-r18 ENUMERATED {supported} OPTIONAL,
-- Support of flight path availability indication via UAI
flightPathAvailabilityIndicationUAI-r18 ENUMERATED {supported} OPTIONAL,
-- Support of numberOfTriggeringCells for eventA3, eventA4, and eventA5, and additionally, if the UE supports eventAxHy-r18,
-- support of numberOfTriggeringCells for eventA3H1, eventA3H2, eventA4H1, eventA4H2, eventA5H1, and eventA5H2
multipleCellsMeasExtension-r18 ENUMERATED {supported} OPTIONAL,
-- Support of handling aerial-specific Ns value(s) and Pmax list broadcasted by the cell
nr-NS-PmaxListAerial-r18 ENUMERATED {supported} OPTIONAL,
-- Support of reporting only the measurement report corresponding to the event with the smallest value between the
-- altitude of the UAV and the altitude threshold for which the altitude-related entering condition e.g. A3H1-2 is satisfied, when
-- multiple events of the same type (Hx or AxHy) for the same MO (for AxHy) are triggered simultaneously.
simulMultiTriggerSingleMeasReport-r18 ENUMERATED {supported} OPTIONAL,
-- Support of A2X service(s) using PC5 Sidelink and dedicated resource pool for A2X service(s)
sl-A2X-Service-r18 ENUMERATED {brid, daa, bridAndDAA} OPTIONAL,
...
}
-- TAG-AERIALPARAMETERS-STOP
-- ASN1STOP
– AppLayerMeasParameters
The IE AppLayerMeasParameters is used to convey the capabilities supported by the UE for application layer measurements.
AppLayerMeasParameters information element
-- ASN1START
-- TAG-APPLAYERMEASPARAMETERS-START
AppLayerMeasParameters-r17 ::= SEQUENCE {
qoe-Streaming-MeasReport-r17 ENUMERATED {supported} OPTIONAL,
qoe-MTSI-MeasReport-r17 ENUMERATED {supported} OPTIONAL,
qoe-VR-MeasReport-r17 ENUMERATED {supported} OPTIONAL,
ran-VisibleQoE-Streaming-MeasReport-r17 ENUMERATED {supported} OPTIONAL,
ran-VisibleQoE-VR-MeasReport-r17 ENUMERATED {supported} OPTIONAL,
ul-MeasurementReportAppLayer-Seg-r17 ENUMERATED {supported} OPTIONAL,
...,
[[
qoe-IdleInactiveMeasReport-r18 ENUMERATED {supported} OPTIONAL,
qoe-NRDC-MeasReport-r18 ENUMERATED {supported} OPTIONAL,
qoe-AdditionalMemoryMeasReport-r18 ENUMERATED {kB128, kB256, kB512, kB1024} OPTIONAL,
qoe-PriorityBasedDiscarding-r18 ENUMERATED {supported} OPTIONAL,
srb5-r18 ENUMERATED {supported} OPTIONAL
]]
}
-- TAG-APPLAYERMEASPARAMETERS-STOP
-- ASN1STOP
– BandCombinationList
The IE BandCombinationList contains a list of NR CA, NR non-CA and/or MR-DC band combinations (also including DL only or UL only band).
BandCombinationList information element
-- ASN1START
-- TAG-BANDCOMBINATIONLIST-START
BandCombinationList ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination
BandCombinationList-v1540 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-v1540
BandCombinationList-v1550 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-v1550
BandCombinationList-v1560 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-v1560
BandCombinationList-v1570 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-v1570
BandCombinationList-v1580 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-v1580
BandCombinationList-v1590 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-v1590
BandCombinationList-v15g0 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-v15g0
BandCombinationList-v15n0 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-v15n0
BandCombinationList-v1610 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-v1610
BandCombinationList-v1630 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-v1630
BandCombinationList-v1640 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-v1640
BandCombinationList-v1650 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-v1650
BandCombinationList-v1680 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-v1680
BandCombinationList-v1690 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-v1690
BandCombinationList-v16a0 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-v16a0
BandCombinationList-v16j0 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-v16j0
BandCombinationList-v1700 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-v1700
BandCombinationList-v1720 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-v1720
BandCombinationList-v1730 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-v1730
BandCombinationList-v1740 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-v1740
BandCombinationList-v1760 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-v1760
BandCombinationList-v1770 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-v1770
BandCombinationList-v1780 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-v1780
BandCombinationList-v1790 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-v1790
BandCombinationList-v17b0 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-v17b0
BandCombinationList-v1800 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-v1800
BandCombinationList-v1830 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-v1830
BandCombinationList-v1840 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-v1840
BandCombinationList-UplinkTxSwitch-r16 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-UplinkTxSwitch-r16
BandCombinationList-UplinkTxSwitch-v1630 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-UplinkTxSwitch-v1630
BandCombinationList-UplinkTxSwitch-v1640 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-UplinkTxSwitch-v1640
BandCombinationList-UplinkTxSwitch-v1650 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-UplinkTxSwitch-v1650
BandCombinationList-UplinkTxSwitch-v1670 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-UplinkTxSwitch-v1670
BandCombinationList-UplinkTxSwitch-v1690 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-UplinkTxSwitch-v1690
BandCombinationList-UplinkTxSwitch-v16a0 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-UplinkTxSwitch-v16a0
BandCombinationList-UplinkTxSwitch-v16e0 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-UplinkTxSwitch-v16e0
BandCombinationList-UplinkTxSwitch-v16j0 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-UplinkTxSwitch-v16j0
BandCombinationList-UplinkTxSwitch-v1700 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-UplinkTxSwitch-v1700
BandCombinationList-UplinkTxSwitch-v1720 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-UplinkTxSwitch-v1720
BandCombinationList-UplinkTxSwitch-v1730 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-UplinkTxSwitch-v1730
BandCombinationList-UplinkTxSwitch-v1740 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-UplinkTxSwitch-v1740
BandCombinationList-UplinkTxSwitch-v1760 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-UplinkTxSwitch-v1760
BandCombinationList-UplinkTxSwitch-v1770 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-UplinkTxSwitch-v1770
BandCombinationList-UplinkTxSwitch-v1780 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-UplinkTxSwitch-v1780
BandCombinationList-UplinkTxSwitch-v1790 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-UplinkTxSwitch-v1790
BandCombinationList-UplinkTxSwitch-v17b0 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-UplinkTxSwitch-v17b0
BandCombinationList-UplinkTxSwitch-v1800 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-UplinkTxSwitch-v1800
BandCombinationList-UplinkTxSwitch-v1830 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-UplinkTxSwitch-v1830
BandCombinationList-UplinkTxSwitch-v1840 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombination-UplinkTxSwitch-v1840
BandCombination ::= SEQUENCE {
bandList SEQUENCE (SIZE (1..maxSimultaneousBands)) OF BandParameters,
featureSetCombination FeatureSetCombinationId,
ca-ParametersEUTRA CA-ParametersEUTRA OPTIONAL,
ca-ParametersNR CA-ParametersNR OPTIONAL,
mrdc-Parameters MRDC-Parameters OPTIONAL,
supportedBandwidthCombinationSet BIT STRING (SIZE (1..32)) OPTIONAL,
powerClass-v1530 ENUMERATED {pc2} OPTIONAL
}
BandCombination-v1540::= SEQUENCE {
bandList-v1540 SEQUENCE (SIZE (1..maxSimultaneousBands)) OF BandParameters-v1540,
ca-ParametersNR-v1540 CA-ParametersNR-v1540 OPTIONAL
}
BandCombination-v1550 ::= SEQUENCE {
ca-ParametersNR-v1550 CA-ParametersNR-v1550
}
BandCombination-v1560::= SEQUENCE {
ne-DC-BC ENUMERATED {supported} OPTIONAL,
ca-ParametersNRDC CA-ParametersNRDC OPTIONAL,
ca-ParametersEUTRA-v1560 CA-ParametersEUTRA-v1560 OPTIONAL,
ca-ParametersNR-v1560 CA-ParametersNR-v1560 OPTIONAL
}
BandCombination-v1570 ::= SEQUENCE {
ca-ParametersEUTRA-v1570 CA-ParametersEUTRA-v1570
}
BandCombination-v1580 ::= SEQUENCE {
mrdc-Parameters-v1580 MRDC-Parameters-v1580
}
BandCombination-v1590::= SEQUENCE {
supportedBandwidthCombinationSetIntraENDC BIT STRING (SIZE (1..32)) OPTIONAL,
mrdc-Parameters-v1590 MRDC-Parameters-v1590
}
BandCombination-v15g0::= SEQUENCE {
ca-ParametersNR-v15g0 CA-ParametersNR-v15g0 OPTIONAL,
ca-ParametersNRDC-v15g0 CA-ParametersNRDC-v15g0 OPTIONAL,
mrdc-Parameters-v15g0 MRDC-Parameters-v15g0 OPTIONAL
}
BandCombination-v15n0::= SEQUENCE {
mrdc-Parameters-v15n0 MRDC-Parameters-v15n0
}
BandCombination-v1610 ::= SEQUENCE {
bandList-v1610 SEQUENCE (SIZE (1..maxSimultaneousBands)) OF BandParameters-v1610 OPTIONAL,
ca-ParametersNR-v1610 CA-ParametersNR-v1610 OPTIONAL,
ca-ParametersNRDC-v1610 CA-ParametersNRDC-v1610 OPTIONAL,
powerClass-v1610 ENUMERATED {pc1dot5} OPTIONAL,
powerClassNRPart-r16 ENUMERATED {pc1, pc2, pc3, pc5} OPTIONAL,
featureSetCombinationDAPS-r16 FeatureSetCombinationId OPTIONAL,
mrdc-Parameters-v1620 MRDC-Parameters-v1620 OPTIONAL
}
BandCombination-v1630 ::= SEQUENCE {
ca-ParametersNR-v1630 CA-ParametersNR-v1630 OPTIONAL,
ca-ParametersNRDC-v1630 CA-ParametersNRDC-v1630 OPTIONAL,
mrdc-Parameters-v1630 MRDC-Parameters-v1630 OPTIONAL,
supportedTxBandCombListPerBC-Sidelink-r16 BIT STRING (SIZE (1..maxBandComb)) OPTIONAL,
supportedRxBandCombListPerBC-Sidelink-r16 BIT STRING (SIZE (1..maxBandComb)) OPTIONAL,
scalingFactorTxSidelink-r16 SEQUENCE (SIZE (1..maxBandComb)) OF ScalingFactorSidelink-r16 OPTIONAL,
scalingFactorRxSidelink-r16 SEQUENCE (SIZE (1..maxBandComb)) OF ScalingFactorSidelink-r16 OPTIONAL
}
BandCombination-v1640 ::= SEQUENCE {
ca-ParametersNR-v1640 CA-ParametersNR-v1640 OPTIONAL,
ca-ParametersNRDC-v1640 CA-ParametersNRDC-v1640 OPTIONAL
}
BandCombination-v1650 ::= SEQUENCE {
ca-ParametersNRDC-v1650 CA-ParametersNRDC-v1650 OPTIONAL
}
BandCombination-v1680 ::= SEQUENCE {
intrabandConcurrentOperationPowerClass-r16 SEQUENCE (SIZE (1..maxBandComb)) OF IntraBandPowerClass-r16 OPTIONAL
}
BandCombination-v1690 ::= SEQUENCE {
dummy CA-ParametersNR-v1690 OPTIONAL
}
BandCombination-v16a0 ::= SEQUENCE {
ca-ParametersNR-v16a0 CA-ParametersNR-v16a0 OPTIONAL,
ca-ParametersNRDC-v16a0 CA-ParametersNRDC-v16a0 OPTIONAL
}
BandCombination-v16j0::= SEQUENCE {
ca-ParametersNR-v16j0 CA-ParametersNR-v1690 OPTIONAL,
ca-ParametersNRDC-v16j0 CA-ParametersNRDC-v16j0 OPTIONAL
}
BandCombination-v1700 ::= SEQUENCE {
ca-ParametersNR-v1700 CA-ParametersNR-v1700 OPTIONAL,
ca-ParametersNRDC-v1700 CA-ParametersNRDC-v1700 OPTIONAL,
mrdc-Parameters-v1700 MRDC-Parameters-v1700 OPTIONAL,
bandList-v1710 SEQUENCE (SIZE (1..maxSimultaneousBands)) OF BandParameters-v1710 OPTIONAL,
supportedBandCombListPerBC-SL-RelayDiscovery-r17 BIT STRING (SIZE (1..maxBandComb)) OPTIONAL,
supportedBandCombListPerBC-SL-NonRelayDiscovery-r17 BIT STRING (SIZE (1..maxBandComb)) OPTIONAL
}
BandCombination-v1720 ::= SEQUENCE {
ca-ParametersNR-v1720 CA-ParametersNR-v1720 OPTIONAL,
ca-ParametersNRDC-v1720 CA-ParametersNRDC-v1720 OPTIONAL
}
BandCombination-v1730 ::= SEQUENCE {
ca-ParametersNR-v1730 CA-ParametersNR-v1730 OPTIONAL,
ca-ParametersNRDC-v1730 CA-ParametersNRDC-v1730 OPTIONAL,
bandList-v1730 SEQUENCE (SIZE (1..maxSimultaneousBands)) OF BandParameters-v1730 OPTIONAL
}
BandCombination-v1740 ::= SEQUENCE {
dummy CA-ParametersNR-v1740 OPTIONAL
}
BandCombination-v1760 ::= SEQUENCE {
ca-ParametersNR-v1760 CA-ParametersNR-v1760,
ca-ParametersNRDC-v1760 CA-ParametersNRDC-v1760
}
BandCombination-v1770::= SEQUENCE {
bandList-v1770 SEQUENCE (SIZE (1..maxSimultaneousBands)) OF BandParameters-v1770,
mrdc-Parameters-v1770 MRDC-Parameters-v1770 OPTIONAL,
ca-ParametersNR-v1770 CA-ParametersNR-v1770 OPTIONAL
}
BandCombination-v1780 ::= SEQUENCE {
ca-ParametersNR-v1780 CA-ParametersNR-v1780 OPTIONAL,
ca-ParametersNRDC-v1780 CA-ParametersNRDC-v1780 OPTIONAL,
bandList-v1780 SEQUENCE (SIZE (1..maxSimultaneousBands)) OF BandParameters-v1780 OPTIONAL,
mrdc-Parameters-v1780 MRDC-Parameters-v1770 OPTIONAL
}
BandCombination-v1790 ::= SEQUENCE {
supportedIntraENDC-BandCombinationList-r17 SEQUENCE (SIZE (1..maxNrofIntraEndc-Components-r17)) OF SupportedIntraENDC-BandCombination-r17 OPTIONAL
}
BandCombination-v17b0::= SEQUENCE {
ca-ParametersNR-v17b0 CA-ParametersNR-v1740 OPTIONAL,
ca-ParametersNRDC-v17b0 CA-ParametersNRDC-v17b0 OPTIONAL
}
BandCombination-v1800 ::= SEQUENCE {
ca-ParametersNR-v1800 CA-ParametersNR-v1800 OPTIONAL,
ca-ParametersNRDC-v1800 CA-ParametersNRDC-v1800 OPTIONAL,
supportedBandCombListPerBC-SL-U2U-RelayDiscovery-r18 BIT STRING (SIZE (1..maxBandComb)) OPTIONAL,
bandList-v1810 SEQUENCE (SIZE (1..maxSimultaneousBands)) OF BandParameters-v1810 OPTIONAL
}
BandCombination-v1830 ::= SEQUENCE {
ca-ParametersNR-v1830 CA-ParametersNR-v1830 OPTIONAL,
ca-ParametersNRDC-v1830 CA-ParametersNRDC-v1830 OPTIONAL
}
BandCombination-v1840 ::= SEQUENCE {
mrdc-Parameters-v1840 MRDC-Parameters-v1840 OPTIONAL
}
BandCombination-UplinkTxSwitch-r16 ::= SEQUENCE {
bandCombination-r16 BandCombination,
bandCombination-v1540 BandCombination-v1540 OPTIONAL,
bandCombination-v1560 BandCombination-v1560 OPTIONAL,
bandCombination-v1570 BandCombination-v1570 OPTIONAL,
bandCombination-v1580 BandCombination-v1580 OPTIONAL,
bandCombination-v1590 BandCombination-v1590 OPTIONAL,
bandCombination-v1610 BandCombination-v1610 OPTIONAL,
supportedBandPairListNR-r16 SEQUENCE (SIZE (1..maxULTxSwitchingBandPairs)) OF ULTxSwitchingBandPair-r16,
uplinkTxSwitching-OptionSupport-r16 ENUMERATED {switchedUL, dualUL, both} OPTIONAL,
uplinkTxSwitching-PowerBoosting-r16 ENUMERATED {supported} OPTIONAL,
...,
[[
-- R4 16-5 UL-MIMO coherence capability for dynamic Tx switching between 3CC 1Tx-2Tx switching
uplinkTxSwitching-PUSCH-TransCoherence-r16 ENUMERATED {nonCoherent, fullCoherent} OPTIONAL
]]
}
BandCombination-UplinkTxSwitch-v1630 ::= SEQUENCE {
bandCombination-v1630 BandCombination-v1630 OPTIONAL
}
BandCombination-UplinkTxSwitch-v1640 ::= SEQUENCE {
bandCombination-v1640 BandCombination-v1640 OPTIONAL
}
BandCombination-UplinkTxSwitch-v1650 ::= SEQUENCE {
bandCombination-v1650 BandCombination-v1650 OPTIONAL
}
BandCombination-UplinkTxSwitch-v1670 ::= SEQUENCE {
bandCombination-v15g0 BandCombination-v15g0 OPTIONAL
}
BandCombination-UplinkTxSwitch-v1690 ::= SEQUENCE {
bandCombination-v1690 BandCombination-v1690 OPTIONAL
}
BandCombination-UplinkTxSwitch-v16a0 ::= SEQUENCE {
bandCombination-v16a0 BandCombination-v16a0 OPTIONAL
}
BandCombination-UplinkTxSwitch-v16e0 ::= SEQUENCE {
bandCombination-v15n0 BandCombination-v15n0 OPTIONAL
}
BandCombination-UplinkTxSwitch-v16j0 ::= SEQUENCE {
bandCombination-v16j0 BandCombination-v16j0 OPTIONAL
}
BandCombination-UplinkTxSwitch-v1700 ::= SEQUENCE {
bandCombination-v1700 BandCombination-v1700 OPTIONAL,
-- R4 16-1/16-2/16-3 Dynamic Tx switching between 2CC/3CC 2Tx-2Tx/1Tx-2Tx switching
supportedBandPairListNR-v1700 SEQUENCE (SIZE (1..maxULTxSwitchingBandPairs)) OF ULTxSwitchingBandPair-v1700 OPTIONAL,
-- R4 16-6: UL-MIMO coherence capability for dynamic Tx switching between 2Tx-2Tx switching
uplinkTxSwitchingBandParametersList-v1700 SEQUENCE (SIZE (1.. maxSimultaneousBands)) OF UplinkTxSwitchingBandParameters-v1700 OPTIONAL
}
BandCombination-UplinkTxSwitch-v1720 ::= SEQUENCE {
bandCombination-v1720 BandCombination-v1720 OPTIONAL,
uplinkTxSwitching-OptionSupport2T2T-r17 ENUMERATED {switchedUL, dualUL, both} OPTIONAL
}
BandCombination-UplinkTxSwitch-v1730 ::= SEQUENCE {
bandCombination-v1730 BandCombination-v1730 OPTIONAL
}
BandCombination-UplinkTxSwitch-v1740 ::= SEQUENCE {
bandCombination-v1740 BandCombination-v1740 OPTIONAL
}
BandCombination-UplinkTxSwitch-v1760 ::= SEQUENCE {
bandCombination-v1760 BandCombination-v1760 OPTIONAL
}
BandCombination-UplinkTxSwitch-v1770 ::= SEQUENCE {
bandCombination-v1770 BandCombination-v1770 OPTIONAL
}
BandCombination-UplinkTxSwitch-v1780 ::= SEQUENCE {
bandCombination-v1780 BandCombination-v1780 OPTIONAL
}
BandCombination-UplinkTxSwitch-v1790 ::= SEQUENCE {
bandCombination-v1790 BandCombination-v1790 OPTIONAL
}
BandCombination-UplinkTxSwitch-v17b0 ::= SEQUENCE {
bandCombination-v17b0 BandCombination-v17b0 OPTIONAL
}
BandCombination-UplinkTxSwitch-v1800 ::= SEQUENCE {
bandCombination-v1800 BandCombination-v1800 OPTIONAL,
supportedBandPairListNR-r18 SEQUENCE (SIZE (1..maxULTxSwitchingBandPairs)) OF ULTxSwitchingBandPair-r18 OPTIONAL,
-- R1 49-Y: Minimum separation time for two uplink switching on more than 2 bands within any two consecutive reference slots
uplinkTxSwitchingMinimumSeparationTime-r18 ENUMERATED {n0us, n500us} OPTIONAL,
-- R4 38-4: Switching Period for unaffected Band for Dual UL
uplinkTxSwitchingAdditionalPeriodDualUL-List-r18 SEQUENCE (SIZE (1..maxULTxSwitchingBetweenBandPairs-r18)) OF
UplinkTxSwitchingAdditionalPeriodDualUL-r18 OPTIONAL,
-- R4 38-6: Switching period restriction for fallback band combination
switchingPeriodRestriction-r18 ENUMERATED {true} OPTIONAL
}
BandCombination-UplinkTxSwitch-v1830 ::= SEQUENCE {
bandCombination-v1830 BandCombination-v1830 OPTIONAL
}
BandCombination-UplinkTxSwitch-v1840 ::= SEQUENCE {
bandCombination-v1840 BandCombination-v1840 OPTIONAL,
supportedBandPairListNR-v1840 SEQUENCE (SIZE (1..maxULTxSwitchingBandPairs)) OF ULTxSwitchingBandPair-v1840 OPTIONAL
}
ULTxSwitchingBandPair-r16 ::= SEQUENCE {
bandIndexUL1-r16 INTEGER(1..maxSimultaneousBands),
bandIndexUL2-r16 INTEGER(1..maxSimultaneousBands),
uplinkTxSwitchingPeriod-r16 ENUMERATED {n35us, n140us, n210us},
uplinkTxSwitching-DL-Interruption-r16 BIT STRING (SIZE(1..maxSimultaneousBands)) OPTIONAL
}
ULTxSwitchingBandPair-v1700 ::= SEQUENCE {
uplinkTxSwitchingPeriod2T2T-r17 ENUMERATED {n35us, n140us, n210us} OPTIONAL
}
ULTxSwitchingBandPair-r18 ::= SEQUENCE {
bandIndexUL1-r18 INTEGER(1..maxSimultaneousBands),
bandIndexUL2-r18 INTEGER(1..maxSimultaneousBands),
-- R1 49-X: Supported switching option for each band pair in the band combination for UL Tx switching across more than 2 bands
uplinkTxSwitchingOptionForBandPair-r18 ENUMERATED {switchedUL, dualUL, both},
-- R4 38-1: Switching period for dynamic UL Tx switching across up to 4 bands in case of inter-band CA, SUL up to two TAGs
uplinkTxSwitchingPeriodForBandPair-r18 SEQUENCE {
switchingPeriodFor2T-r18 ENUMERATED {n35us, n140us, n210us} OPTIONAL,
switchingPeriodFor1T-r18 ENUMERATED {n35us, n140us, n210us}
},
-- R4 38-2: Application of DL interruptions due to dynamic UL Tx switching
uplinkTxSwitching-DL-Interruption-r18 BIT STRING (SIZE(1..maxSimultaneousBands)) OPTIONAL,
-- R4 38-3: Switching Period for unaffected Band for Dual UL
uplinkTxSwitchingPeriodUnaffectedBandDualUL-List-r18 SEQUENCE (SIZE (1..maxSimultaneousBands-2-r18)) OF
SwitchingPeriodUnaffectedBandDualUL-r18 OPTIONAL
}
ULTxSwitchingBandPair-v1840 ::= SEQUENCE {
-- R1 49-Z: Support of 2-band configuration of 1T-1T UL Tx switching by using Rel-18 UL Tx switching configurations
configured1T1T-OnTwoBands-r18 ENUMERATED {supported} OPTIONAL
}
UplinkTxSwitchingBandParameters-v1700 ::= SEQUENCE {
bandIndex-r17 INTEGER(1..maxSimultaneousBands),
-- R4 38-5: UL-MIMO coherence capability for dynamic Tx switching between 2Tx-2Tx switching among up to 4 bands
uplinkTxSwitching2T2T-PUSCH-TransCoherence-r17 ENUMERATED {nonCoherent, fullCoherent} OPTIONAL
}
UplinkTxSwitchingAdditionalPeriodDualUL-r18::= SEQUENCE {
uplinkTxSwitchingBetweenBandPairs-r18 SEQUENCE {
bandPairIndex1-r18 INTEGER(1.. maxULTxSwitchingBandPairs),
anotherBandPairOrBand-r18 CHOICE {
bandPairIndex2-r18 INTEGER(1.. maxULTxSwitchingBandPairs),
bandIndex-r18 INTEGER(1..maxSimultaneousBands)
}
},
-- R4 38-4: Additional switching Period for switching case across three or four bands for Dual UL
switchingAdditionalPeriodDualUL-r18 ENUMERATED {n35us, n140us, n210us}
}
SwitchingPeriodUnaffectedBandDualUL-r18::= SEQUENCE {
bandIndexUnaffected-r18 INTEGER(1..maxSimultaneousBands),
periodUnaffectedBandDualUL-r18 CHOICE {
maintainedUL-Trans-r18 NULL,
periodOnULBands-r18 ENUMERATED {n35us, n140us, n210us}
}
}
BandParameters ::= CHOICE {
eutra SEQUENCE {
bandEUTRA FreqBandIndicatorEUTRA,
ca-BandwidthClassDL-EUTRA CA-BandwidthClassEUTRA OPTIONAL,
ca-BandwidthClassUL-EUTRA CA-BandwidthClassEUTRA OPTIONAL
},
nr SEQUENCE {
bandNR FreqBandIndicatorNR,
ca-BandwidthClassDL-NR CA-BandwidthClassNR OPTIONAL,
ca-BandwidthClassUL-NR CA-BandwidthClassNR OPTIONAL
}
}
BandParameters-v1540 ::= SEQUENCE {
srs-CarrierSwitch CHOICE {
nr SEQUENCE {
srs-SwitchingTimesListNR SEQUENCE (SIZE (1..maxSimultaneousBands)) OF SRS-SwitchingTimeNR
},
eutra SEQUENCE {
srs-SwitchingTimesListEUTRA SEQUENCE (SIZE (1..maxSimultaneousBands)) OF SRS-SwitchingTimeEUTRA
}
} OPTIONAL,
srs-TxSwitch SEQUENCE {
supportedSRS-TxPortSwitch ENUMERATED {t1r2, t1r4, t2r4, t1r4-t2r4, t1r1, t2r2, t4r4, notSupported},
txSwitchImpactToRx INTEGER (1..32) OPTIONAL,
txSwitchWithAnotherBand INTEGER (1..32) OPTIONAL
} OPTIONAL
}
BandParameters-v1610 ::= SEQUENCE {
srs-TxSwitch-v1610 SEQUENCE {
supportedSRS-TxPortSwitch-v1610 ENUMERATED {t1r1-t1r2, t1r1-t1r2-t1r4, t1r1-t1r2-t2r2-t2r4, t1r1-t1r2-t2r2-t1r4-t2r4,
t1r1-t2r2, t1r1-t2r2-t4r4}
} OPTIONAL
}
BandParameters-v1710 ::= SEQUENCE {
-- R1 23-8-3 SRS Antenna switching for >4Rx
srs-AntennaSwitchingBeyond4RX-r17 SEQUENCE {
-- 1. Support of SRS antenna switching xTyR with y>4
supportedSRS-TxPortSwitchBeyond4Rx-r17 BIT STRING (SIZE (11)),
-- 2. Report the entry number of the first-listed band with UL in the band combination that affects this DL
entryNumberAffectBeyond4Rx-r17 INTEGER (1..32) OPTIONAL,
-- 3. Report the entry number of the first-listed band with UL in the band combination that switches together with this UL
entryNumberSwitchBeyond4Rx-r17 INTEGER (1..32) OPTIONAL
} OPTIONAL
}
BandParameters-v1730 ::= SEQUENCE {
-- R1 39-3-2 Affected bands for inter-band CA during SRS carrier switching
srs-SwitchingAffectedBandsListNR-r17 SEQUENCE (SIZE (1..maxSimultaneousBands)) OF SRS-SwitchingAffectedBandsNR-r17
}
BandParameters-v1770 ::= SEQUENCE {
ca-BandwidthClassDL-NR-r17 CA-BandwidthClassNR-r17 OPTIONAL,
ca-BandwidthClassUL-NR-r17 CA-BandwidthClassNR-r17 OPTIONAL
}
BandParameters-v1780 ::= SEQUENCE {
ca-BandwidthClassDL-NR-r17 CA-BandwidthClassNR-r17 OPTIONAL,
ca-BandwidthClassUL-NR-r17 CA-BandwidthClassNR-r17 OPTIONAL,
supportedAggBW-FR2-r17 SEQUENCE {
supportedAggBW-DL-r17 SupportedAggBandwidth-r17 OPTIONAL,
supportedAggBW-UL-r17 SupportedAggBandwidth-r17 OPTIONAL
} OPTIONAL
}
BandParameters-v1810 ::= SEQUENCE {
-- R1 40-5-4: SRS 8 Tx ports-antenna switching
srs-AntennaSwitching8T8R-r18 SEQUENCE {
antennaSwitch8T8R-r18 ENUMERATED {noTdm, tdmAndNoTdm} OPTIONAL,
downgradeConfig-r18 CHOICE {
empty-r18 NULL,
downgrade-r18 BIT STRING (SIZE (11))
} OPTIONAL,
entryNumberAffect-r18 INTEGER (1..32) OPTIONAL,
entryNumberSwitch-r18 INTEGER (1..32) OPTIONAL
} OPTIONAL
}
ScalingFactorSidelink-r16 ::= ENUMERATED {f0p4, f0p75, f0p8, f1}
IntraBandPowerClass-r16 ::= ENUMERATED {pc2, pc3, spare6, spare5, spare4, spare3, spare2, spare1}
SRS-SwitchingAffectedBandsNR-r17 ::= BIT STRING (SIZE (1..maxSimultaneousBands))
SupportedIntraENDC-BandCombination-r17 ::= SEQUENCE {
supportedBandwidthCombinationSetIntraENDC-v1790 BIT STRING (SIZE (1..32)) OPTIONAL,
mrdc-Parameters-v1790 MRDC-Parameters-v1790 OPTIONAL
}
-- TAG-BANDCOMBINATIONLIST-STOP
-- ASN1STOP
– BandCombinationListSidelinkEUTRA-NR
The IE BandCombinationListSidelinkEUTRA-NR contains a list of V2X sidelink and NR sidelink band combinations.
BandCombinationListSidelinkEUTRA-NR information element
-- ASN1START
-- TAG-BANDCOMBINATIONLISTSIDELINKEUTRANR-START
BandCombinationListSidelinkEUTRA-NR-r16 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombinationParametersSidelinkEUTRA-NR-r16
BandCombinationListSidelinkEUTRA-NR-v1630 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombinationParametersSidelinkEUTRA-NR-v1630
BandCombinationListSidelinkEUTRA-NR-v1710 ::= SEQUENCE (SIZE (1..maxBandComb)) OF BandCombinationParametersSidelinkEUTRA-NR-v1710
BandCombinationParametersSidelinkEUTRA-NR-r16 ::= SEQUENCE (SIZE (1..maxSimultaneousBands)) OF BandParametersSidelinkEUTRA-NR-r16
BandCombinationParametersSidelinkEUTRA-NR-v1630 ::= SEQUENCE (SIZE (1..maxSimultaneousBands)) OF BandParametersSidelinkEUTRA-NR-v1630
BandCombinationParametersSidelinkEUTRA-NR-v1710 ::= SEQUENCE (SIZE (1..maxSimultaneousBands)) OF BandParametersSidelinkEUTRA-NR-v1710
BandParametersSidelinkEUTRA-NR-r16 ::= CHOICE {
eutra SEQUENCE {
bandParametersSidelinkEUTRA1-r16 OCTET STRING OPTIONAL,
bandParametersSidelinkEUTRA2-r16 OCTET STRING OPTIONAL
},
nr SEQUENCE {
bandParametersSidelinkNR-r16 BandParametersSidelink-r16
}
}
BandParametersSidelinkEUTRA-NR-v1630 ::= CHOICE {
eutra NULL,
nr SEQUENCE {
tx-Sidelink-r16 ENUMERATED {supported} OPTIONAL,
rx-Sidelink-r16 ENUMERATED {supported} OPTIONAL,
sl-CrossCarrierScheduling-r16 ENUMERATED {supported} OPTIONAL
}
}
BandParametersSidelinkEUTRA-NR-v1710 ::= CHOICE {
eutra NULL,
nr SEQUENCE {
--32-4
sl-TransmissionMode2-PartialSensing-r17 SEQUENCE {
harq-TxProcessModeTwoSidelink-r17 ENUMERATED {n8, n16},
scs-CP-PatternTxSidelinkModeTwo-r17 CHOICE {
fr1-r17 SEQUENCE {
scs-15kHz-r17 BIT STRING (SIZE (16)) OPTIONAL,
scs-30kHz-r17 BIT STRING (SIZE (16)) OPTIONAL,
scs-60kHz-r17 BIT STRING (SIZE (16)) OPTIONAL
},
fr2-r17 SEQUENCE {
scs-60kHz-r17 BIT STRING (SIZE (16)) OPTIONAL,
scs-120kHz-r17 BIT STRING (SIZE (16)) OPTIONAL
}
} OPTIONAL,
extendedCP-Mode2PartialSensing-r17 ENUMERATED {supported} OPTIONAL,
dl-openLoopPC-Sidelink-r17 ENUMERATED {supported} OPTIONAL
} OPTIONAL,
--32-2a: Receiving NR sidelink of PSFCH
rx-sidelinkPSFCH-r17 ENUMERATED {n5, n15, n25, n32, n35, n45, n50, n64} OPTIONAL,
--32-5a-1
tx-IUC-Scheme1-Mode2Sidelink-r17 ENUMERATED {supported} OPTIONAL,
--32-5b-1
tx-IUC-Scheme2-Mode2Sidelink-r17 ENUMERATED {n4, n8, n16} OPTIONAL
}
}
BandParametersSidelink-r16 ::= SEQUENCE {
freqBandSidelink-r16 FreqBandIndicatorNR
}
-- TAG-BANDCOMBINATIONLISTSIDELINKEUTRANR-STOP
-- ASN1STOP
– BandCombinationListSL-Discovery
The IE BandCombinationListSL-Discovery contains a list of NR Sidelink discovery band combinations.
BandCombinationListSidelinkSL-Discovery information element
-- ASN1START
-- TAG-BANDCOMBINATIONLISTSLDISCOVERY-START
BandCombinationListSL-Discovery-r17 ::= SEQUENCE (SIZE (1..maxSimultaneousBands)) OF BandParametersSidelinkDiscovery-r17
BandParametersSidelinkDiscovery-r17 ::= SEQUENCE {
sl-CrossCarrierScheduling-r17 ENUMERATED {supported} OPTIONAL,
--R1 32-4: Transmitting NR sidelink mode 2 with partial sensing
sl-TransmissionMode2-PartialSensing-r17 SEQUENCE {
harq-TxProcessModeTwoSidelink-r17 ENUMERATED {n8, n16},
scs-CP-PatternTxSidelinkModeTwo-r17 CHOICE {
fr1-r17 SEQUENCE {
scs-15kHz-r17 BIT STRING (SIZE (16)) OPTIONAL,
scs-30kHz-r17 BIT STRING (SIZE (16)) OPTIONAL,
scs-60kHz-r17 BIT STRING (SIZE (16)) OPTIONAL
},
fr2-r17 SEQUENCE {
scs-60kHz-r17 BIT STRING (SIZE (16)) OPTIONAL,
scs-120kHz-r17 BIT STRING (SIZE (16)) OPTIONAL
}
} OPTIONAL,
extendedCP-Mode2PartialSensing-r17 ENUMERATED {supported} OPTIONAL,
dl-openLoopPC-Sidelink-r17 ENUMERATED {supported} OPTIONAL
} OPTIONAL,
--R1 32-5a-1: Transmitting Inter-UE coordination scheme 1 in NR sidelink mode 2
tx-IUC-Scheme1-Mode2Sidelink-r17 ENUMERATED {supported} OPTIONAL
}
-- TAG-BANDCOMBINATIONLISTSLDISCOVERY-STOP
-- ASN1STOP
– CA-BandwidthClassEUTRA
The IE CA-BandwidthClassEUTRA indicates the E-UTRA CA bandwidth class as defined in TS 36.101 [22], table 5.6A-1.
CA-BandwidthClassEUTRA information element
-- ASN1START
-- TAG-CA-BANDWIDTHCLASSEUTRA-START
CA-BandwidthClassEUTRA ::= ENUMERATED {a, b, c, d, e, f, ...}
-- TAG-CA-BANDWIDTHCLASSEUTRA-STOP
-- ASN1STOP
– CA-BandwidthClassNR
The IE CA-BandwidthClassNR indicates the NR CA bandwidth class as defined in TS 38.101-1 [15], table 5.3A.5-1 and TS 38.101-2 [39], table 5.3A.4-1.
CA-BandwidthClassNR information element
-- ASN1START
-- TAG-CA-BANDWIDTHCLASSNR-START
-- R4 17-6: new CA BW Classes R2-R12
-- R4 17-7: new CA BW Classes V, W
CA-BandwidthClassNR ::= ENUMERATED {a, b, c, d, e, f, g, h, i, j, k, l, m, n, o, p, q, ...,r2-v1730, r3-v1730, r4-v1730, r5-v1730, r6-v1730, r7-v1730, r8-v1730, r9-v1730, r10-v1730, r11-v1730, r12-v1730,v-v1770, w-v1770 }
CA-BandwidthClassNR-r17 ::= ENUMERATED {r, s, t, u, ...}
-- TAG-CA-BANDWIDTHCLASSNR-STOP
-- ASN1STOP
– CA-ParametersEUTRA
The IE CA-ParametersEUTRA contains the E-UTRA part of band combination parameters for a given MR-DC band combination.
NOTE: If additional E-UTRA band combination parameters are defined in TS 36.331 [10], which are supported for MR-DC, they will be defined here as well.
CA-ParametersEUTRA information element
-- ASN1START
-- TAG-CA-PARAMETERSEUTRA-START
CA-ParametersEUTRA ::= SEQUENCE {
multipleTimingAdvance ENUMERATED {supported} OPTIONAL,
simultaneousRx-Tx ENUMERATED {supported} OPTIONAL,
supportedNAICS-2CRS-AP BIT STRING (SIZE (1..8)) OPTIONAL,
additionalRx-Tx-PerformanceReq ENUMERATED {supported} OPTIONAL,
ue-CA-PowerClass-N ENUMERATED {class2} OPTIONAL,
supportedBandwidthCombinationSetEUTRA-v1530 BIT STRING (SIZE (1..32)) OPTIONAL,
...
}
CA-ParametersEUTRA-v1560 ::= SEQUENCE {
fd-MIMO-TotalWeightedLayers INTEGER (2..128) OPTIONAL
}
CA-ParametersEUTRA-v1570 ::= SEQUENCE {
dl-1024QAM-TotalWeightedLayers INTEGER (0..10) OPTIONAL
}
-- TAG-CA-PARAMETERSEUTRA-STOP
-- ASN1STOP
– CA-ParametersNR
The IE CA-ParametersNR contains carrier aggregation and inter-frequency DAPS handover related capabilities that are defined per band combination.
CA-ParametersNR information element
-- ASN1START
-- TAG-CA-PARAMETERSNR-START
CA-ParametersNR ::= SEQUENCE {
dummy ENUMERATED {supported} OPTIONAL,
parallelTxSRS-PUCCH-PUSCH ENUMERATED {supported} OPTIONAL,
parallelTxPRACH-SRS-PUCCH-PUSCH ENUMERATED {supported} OPTIONAL,
simultaneousRxTxInterBandCA ENUMERATED {supported} OPTIONAL,
simultaneousRxTxSUL ENUMERATED {supported} OPTIONAL,
diffNumerologyAcrossPUCCH-Group ENUMERATED {supported} OPTIONAL,
diffNumerologyWithinPUCCH-GroupSmallerSCS ENUMERATED {supported} OPTIONAL,
supportedNumberTAG ENUMERATED {n2, n3, n4} OPTIONAL,
...
}
CA-ParametersNR-v1540 ::= SEQUENCE {
simultaneousSRS-AssocCSI-RS-AllCC INTEGER (5..32) OPTIONAL,
csi-RS-IM-ReceptionForFeedbackPerBandComb SEQUENCE {
maxNumberSimultaneousNZP-CSI-RS-ActBWP-AllCC INTEGER (1..64) OPTIONAL,
totalNumberPortsSimultaneousNZP-CSI-RS-ActBWP-AllCC INTEGER (2..256) OPTIONAL
} OPTIONAL,
simultaneousCSI-ReportsAllCC INTEGER (5..32) OPTIONAL,
dualPA-Architecture ENUMERATED {supported} OPTIONAL
}
CA-ParametersNR-v1550 ::= SEQUENCE {
dummy ENUMERATED {supported} OPTIONAL
}
CA-ParametersNR-v1560 ::= SEQUENCE {
diffNumerologyWithinPUCCH-GroupLargerSCS ENUMERATED {supported} OPTIONAL
}
CA-ParametersNR-v15g0 ::= SEQUENCE {
simultaneousRxTxInterBandCAPerBandPair SimultaneousRxTxPerBandPair OPTIONAL,
simultaneousRxTxSULPerBandPair SimultaneousRxTxPerBandPair OPTIONAL
}
CA-ParametersNR-v1610 ::= SEQUENCE {
-- R1 9-3: Parallel MsgA and SRS/PUCCH/PUSCH transmissions across CCs in inter-band CA
parallelTxMsgA-SRS-PUCCH-PUSCH-r16 ENUMERATED {supported} OPTIONAL,
-- R1 9-4: MsgA operation in a band combination including SUL
msgA-SUL-r16 ENUMERATED {supported} OPTIONAL,
-- R1 10-9c: Joint search space group switching across multiple cells
jointSearchSpaceSwitchAcrossCells-r16 ENUMERATED {supported} OPTIONAL,
-- R1 14-5: Half-duplex UE behaviour in TDD CA for same SCS
half-DuplexTDD-CA-SameSCS-r16 ENUMERATED {supported} OPTIONAL,
-- R1 18-4: SCell dormancy within active time
scellDormancyWithinActiveTime-r16 ENUMERATED {supported} OPTIONAL,
-- R1 18-4a: SCell dormancy outside active time
scellDormancyOutsideActiveTime-r16 ENUMERATED {supported} OPTIONAL,
-- R1 18-6: Cross-carrier A-CSI RS triggering with different SCS
crossCarrierA-CSI-trigDiffSCS-r16 ENUMERATED {higherA-CSI-SCS,lowerA-CSI-SCS,both} OPTIONAL,
-- R1 18-6a: Default QCL assumption for cross-carrier A-CSI-RS triggering
defaultQCL-CrossCarrierA-CSI-Trig-r16 ENUMERATED {diffOnly, both} OPTIONAL,
-- R1 18-7: CA with non-aligned frame boundaries for inter-band CA
interCA-NonAlignedFrame-r16 ENUMERATED {supported} OPTIONAL,
simul-SRS-Trans-BC-r16 ENUMERATED {n2} OPTIONAL,
interFreqDAPS-r16 SEQUENCE {
interFreqAsyncDAPS-r16 ENUMERATED {supported} OPTIONAL,
interFreqDiffSCS-DAPS-r16 ENUMERATED {supported} OPTIONAL,
interFreqMultiUL-TransmissionDAPS-r16 ENUMERATED {supported} OPTIONAL,
interFreqSemiStaticPowerSharingDAPS-Mode1-r16 ENUMERATED {supported} OPTIONAL,
interFreqSemiStaticPowerSharingDAPS-Mode2-r16 ENUMERATED {supported} OPTIONAL,
interFreqDynamicPowerSharingDAPS-r16 ENUMERATED {short, long} OPTIONAL,
interFreqUL-TransCancellationDAPS-r16 ENUMERATED {supported} OPTIONAL
} OPTIONAL,
codebookParametersPerBC-r16 CodebookParameters-v1610 OPTIONAL,
-- R1 16-2a-10 Value of R for BD/CCE
blindDetectFactor-r16 INTEGER (1..2) OPTIONAL,
-- R1 11-2a: Capability on the number of CCs for monitoring a maximum number of BDs and non-overlapped CCEs per span when configured
-- with DL CA with Rel-16 PDCCH monitoring capability on all the serving cells
pdcch-MonitoringCA-r16 SEQUENCE {
maxNumberOfMonitoringCC-r16 INTEGER (2..16),
supportedSpanArrangement-r16 ENUMERATED {alignedOnly, alignedAndNonAligned}
} OPTIONAL,
-- R1 11-2c: Number of carriers for CCE/BD scaling with DL CA with mix of Rel. 16 and Rel. 15 PDCCH monitoring capabilities on
-- different carriers
pdcch-BlindDetectionCA-Mixed-r16 SEQUENCE {
pdcch-BlindDetectionCA1-r16 INTEGER (1..15),
pdcch-BlindDetectionCA2-r16 INTEGER (1..15),
supportedSpanArrangement-r16 ENUMERATED {alignedOnly, alignedAndNonAligned}
} OPTIONAL,
-- R1 11-2d: Capability on the number of CCs for monitoring a maximum number of BDs and non-overlapped CCEs per span for MCG and for
-- SCG when configured for NR-DC operation with Rel-16 PDCCH monitoring capability on all the serving cells
pdcch-BlindDetectionMCG-UE-r16 INTEGER (1..14) OPTIONAL,
pdcch-BlindDetectionSCG-UE-r16 INTEGER (1..14) OPTIONAL,
-- R1 11-2e: Number of carriers for CCE/BD scaling for MCG and for SCG when configured for NR-DC operation with mix of Rel. 16 and
-- Rel. 15 PDCCH monitoring capabilities on different carriers
pdcch-BlindDetectionMCG-UE-Mixed-r16 SEQUENCE {
pdcch-BlindDetectionMCG-UE1-r16 INTEGER (0..15),
pdcch-BlindDetectionMCG-UE2-r16 INTEGER (0..15)
} OPTIONAL,
pdcch-BlindDetectionSCG-UE-Mixed-r16 SEQUENCE {
pdcch-BlindDetectionSCG-UE1-r16 INTEGER (0..15),
pdcch-BlindDetectionSCG-UE2-r16 INTEGER (0..15)
} OPTIONAL,
-- R1 18-5 cross-carrier scheduling with different SCS in DL CA
crossCarrierSchedulingDL-DiffSCS-r16 ENUMERATED {low-to-high, high-to-low, both} OPTIONAL,
-- R1 18-5a Default QCL assumption for cross-carrier scheduling
crossCarrierSchedulingDefaultQCL-r16 ENUMERATED {diff-only, both} OPTIONAL,
-- R1 18-5b cross-carrier scheduling with different SCS in UL CA
crossCarrierSchedulingUL-DiffSCS-r16 ENUMERATED {low-to-high, high-to-low, both} OPTIONAL,
-- R1 13.19a Simultaneous positioning SRS and MIMO SRS transmission for a given BC
simul-SRS-MIMO-Trans-BC-r16 ENUMERATED {n2} OPTIONAL,
-- R1 16-3a, 16-3a-1, 16-3b, 16-3b-1: New Individual Codebook
codebookParametersAdditionPerBC-r16 CodebookParametersAdditionPerBC-r16 OPTIONAL,
-- R1 16-8: Mixed codebook
codebookComboParametersAdditionPerBC-r16 CodebookComboParametersAdditionPerBC-r16 OPTIONAL
}
CA-ParametersNR-v1630 ::= SEQUENCE {
-- R1 22-5b: Simultaneous transmission of SRS for antenna switching and SRS for CB/NCB /BM for inter-band UL CA
-- R1 22-5d: Simultaneous transmission of SRS for antenna switching for inter-band UL CA
simulTX-SRS-AntSwitchingInterBandUL-CA-r16 SimulSRS-ForAntennaSwitching-r16 OPTIONAL,
-- R4 8-5: supported beam management type for inter-band CA
beamManagementType-r16 ENUMERATED {ibm, dummy} OPTIONAL,
-- R4 7-3a: UL frequency separation class with aggregate BW and Gap BW
intraBandFreqSeparationUL-AggBW-GapBW-r16 ENUMERATED {classI, classII, classIII} OPTIONAL,
-- RAN 89: Case B in case of Inter-band CA with non-aligned frame boundaries
interCA-NonAlignedFrame-B-r16 ENUMERATED {supported} OPTIONAL
}
CA-ParametersNR-v1640 ::= SEQUENCE {
-- R4 7-5: Support of reporting UL Tx DC locations for uplink intra-band CA.
uplinkTxDC-TwoCarrierReport-r16 ENUMERATED {supported} OPTIONAL,
-- RAN 22-6: Support of up to 3 different numerologies in the same NR PUCCH group for NR part of EN-DC, NGEN-DC, NE-DC and NR-CA
-- where UE is not configured with two NR PUCCH groups
maxUpTo3Diff-NumerologiesConfigSinglePUCCH-grp-r16 PUCCH-Grp-CarrierTypes-r16 OPTIONAL,
-- RAN 22-6a: Support of up to 4 different numerologies in the same NR PUCCH group for NR part of EN-DC, NGEN-DC, NE-DC and NR-CA
-- where UE is not configured with two NR PUCCH groups
maxUpTo4Diff-NumerologiesConfigSinglePUCCH-grp-r16 PUCCH-Grp-CarrierTypes-r16 OPTIONAL,
-- RAN 22-7: Support two PUCCH groups for NR-CA with 3 or more bands with at least two carrier types
twoPUCCH-Grp-ConfigurationsList-r16 SEQUENCE (SIZE (1..maxTwoPUCCH-Grp-ConfigList-r16)) OF TwoPUCCH-Grp-Configurations-r16 OPTIONAL,
-- R1 22-7a: Different numerology across NR PUCCH groups
diffNumerologyAcrossPUCCH-Group-CarrierTypes-r16 ENUMERATED {supported} OPTIONAL,
-- R1 22-7b: Different numerologies across NR carriers within the same NR PUCCH group, with PUCCH on a carrier of smaller SCS
diffNumerologyWithinPUCCH-GroupSmallerSCS-CarrierTypes-r16 ENUMERATED {supported} OPTIONAL,
-- R1 22-7c: Different numerologies across NR carriers within the same NR PUCCH group, with PUCCH on a carrier of larger SCS
diffNumerologyWithinPUCCH-GroupLargerSCS-CarrierTypes-r16 ENUMERATED {supported} OPTIONAL,
-- R1 11-2f: add the replicated FGs of 11-2a/c with restriction for non-aligned span case
-- with DL CA with Rel-16 PDCCH monitoring capability on all the serving cells
pdcch-MonitoringCA-NonAlignedSpan-r16 INTEGER (2..16) OPTIONAL,
-- R1 11-2g: add the replicated FGs of 11-2a/c with restriction for non-aligned span case
pdcch-BlindDetectionCA-Mixed-NonAlignedSpan-r16 SEQUENCE {
pdcch-BlindDetectionCA1-r16 INTEGER (1..15),
pdcch-BlindDetectionCA2-r16 INTEGER (1..15)
} OPTIONAL
}
CA-ParametersNR-v1690 ::= SEQUENCE {
csi-ReportingCrossPUCCH-Grp-r16 SEQUENCE {
computationTimeForA-CSI-r16 ENUMERATED {sameAsNoCross, relaxed},
additionalSymbols-r16 SEQUENCE {
scs-15kHz-additionalSymbols-r16 ENUMERATED {s14, s28} OPTIONAL,
scs-30kHz-additionalSymbols-r16 ENUMERATED {s14, s28} OPTIONAL,
scs-60kHz-additionalSymbols-r16 ENUMERATED {s14, s28, s56} OPTIONAL,
scs-120kHz-additionalSymbols-r16 ENUMERATED {s14, s28, s56} OPTIONAL
} OPTIONAL,
sp-CSI-ReportingOnPUCCH-r16 ENUMERATED {supported} OPTIONAL,
sp-CSI-ReportingOnPUSCH-r16 ENUMERATED {supported} OPTIONAL,
carrierTypePairList-r16 SEQUENCE (SIZE (1..maxCarrierTypePairList-r16)) OF CarrierTypePair-r16
} OPTIONAL
}
CA-ParametersNR-v16a0 ::= SEQUENCE {
pdcch-BlindDetectionMixedList-r16 SEQUENCE(SIZE(1..maxNrofPdcch-BlindDetectionMixed-1-r16)) OF PDCCH-BlindDetectionMixedList-r16
}
CA-ParametersNR-v1700 ::= SEQUENCE {
-- R1 23-9-1: Basic Features of Further Enhanced Port-Selection Type II Codebook (FeType-II) per band combination information
codebookParametersfetype2PerBC-r17 CodebookParametersfetype2PerBC-r17 OPTIONAL,
-- R4 18-4: Support of enhanced Demodulation requirements for CA in HST SFN FR1
demodulationEnhancementCA-r17 ENUMERATED {supported} OPTIONAL,
-- R4 20-1: Maximum uplink duty cycle for NR inter-band CA power class 2
maxUplinkDutyCycle-interBandCA-PC2-r17 ENUMERATED {n50, n60, n70, n80, n90, n100} OPTIONAL,
-- R4 20-2: Maximum uplink duty cycle for NR SUL combination power class 2
maxUplinkDutyCycle-SULcombination-PC2-r17 ENUMERATED {n50, n60, n70, n80, n90, n100} OPTIONAL,
beamManagementType-CBM-r17 ENUMERATED {supported} OPTIONAL,
-- R1 25-18: Parallel PUCCH and PUSCH transmission across CCs in inter-band CA
parallelTxPUCCH-PUSCH-r17 ENUMERATED {supported} OPTIONAL,
-- R1 23-9-5 Active CSI-RS resources and ports for mixed codebook types in any slot per band combination
codebookComboParameterMixedTypePerBC-r17 CodebookComboParameterMixedTypePerBC-r17 OPTIONAL,
-- R1 23-7-1 Basic Features of CSI Enhancement for Multi-TRP
mTRP-CSI-EnhancementPerBC-r17 SEQUENCE {
maxNumNZP-CSI-RS-r17 INTEGER (2..8),
cSI-Report-mode-r17 ENUMERATED {mode1, mode2, both},
supportedComboAcrossCCs-r17 SEQUENCE (SIZE (1..16)) OF CSI-MultiTRP-SupportedCombinations-r17,
codebookMode-NCJT-r17 ENUMERATED{mode1,mode1And2}
} OPTIONAL,
-- R1 23-7-1b Active CSI-RS resources and ports in the presence of multi-TRP CSI
codebookComboParameterMultiTRP-PerBC-r17 CodebookComboParameterMultiTRP-PerBC-r17 OPTIONAL,
-- R1 24-8b: 32 DL HARQ processes for FR 2-2 - maximum number of component carriers
maxCC-32-DL-HARQ-ProcessFR2-2-r17 ENUMERATED {n1, n2, n3, n4, n6, n8, n16, n32} OPTIONAL,
-- R1 24-9b: 32 UL HARQ processes for FR 2-2 - maximum number of component carriers
maxCC-32-UL-HARQ-ProcessFR2-2-r17 ENUMERATED {n1, n2, n3, n4, n5, n8, n16, n32} OPTIONAL,
-- R1 34-2: Cross-carrier scheduling from SCell to PCell/PSCell (Type B)
crossCarrierSchedulingSCell-SpCellTypeB-r17 CrossCarrierSchedulingSCell-SpCell-r17 OPTIONAL,
-- R1 34-1: Cross-carrier scheduling from SCell to PCell/PSCell with search space restrictions (Type A)
crossCarrierSchedulingSCell-SpCellTypeA-r17 CrossCarrierSchedulingSCell-SpCell-r17 OPTIONAL,
-- R1 34-1a: DCI formats on PCell/PSCell USS set(s) support
dci-FormatsPCellPSCellUSS-Sets-r17 ENUMERATED {supported} OPTIONAL,
-- R1 34-3: Disabling scaling factor alpha when sSCell is deactivated
disablingScalingFactorDeactSCell-r17 ENUMERATED {supported} OPTIONAL,
-- R1 34-4: Disabling scaling factor alpha when sSCell is deactivated
disablingScalingFactorDormantSCell-r17 ENUMERATED {supported} OPTIONAL,
-- R1 34-5: Non-aligned frame boundaries between PCell/PSCell and sSCell
non-AlignedFrameBoundaries-r17 SEQUENCE {
scs15kHz-15kHz-r17 BIT STRING (SIZE (1..496)) OPTIONAL,
scs15kHz-30kHz-r17 BIT STRING (SIZE (1..496)) OPTIONAL,
scs15kHz-60kHz-r17 BIT STRING (SIZE (1..496)) OPTIONAL,
scs30kHz-30kHz-r17 BIT STRING (SIZE (1..496)) OPTIONAL,
scs30kHz-60kHz-r17 BIT STRING (SIZE (1..496)) OPTIONAL,
scs60kHz-60kHz-r17 BIT STRING (SIZE (1..496)) OPTIONAL
} OPTIONAL
}
CA-ParametersNR-v1720 ::= SEQUENCE {
-- R1 39-1: Parallel SRS and PUCCH/PUSCH transmission across CCs in intra-band non-contiguous CA
parallelTxSRS-PUCCH-PUSCH-intraBand-r17 ENUMERATED {supported} OPTIONAL,
-- R1 39-2: Parallel PRACH and SRS/PUCCH/PUSCH transmissions across CCs in intra-band non-contiguous CA
parallelTxPRACH-SRS-PUCCH-PUSCH-intraBand-r17 ENUMERATED {supported} OPTIONAL,
-- R1 25-9: Semi-static PUCCH cell switching for a single PUCCH group only
semiStaticPUCCH-CellSwitchSingleGroup-r17 SEQUENCE {
pucch-Group-r17 ENUMERATED {primaryGroupOnly, secondaryGroupOnly, eitherPrimaryOrSecondaryGroup},
pucch-Group-Config-r17 PUCCH-Group-Config-r17
} OPTIONAL,
-- R1 25-9a: Semi-static PUCCH cell switching for two PUCCH groups
semiStaticPUCCH-CellSwitchTwoGroups-r17 SEQUENCE (SIZE (1..maxTwoPUCCH-Grp-ConfigList-r17)) OF TwoPUCCH-Grp-Configurations-r17 OPTIONAL,
-- R1 25-10: PUCCH cell switching based on dynamic indication for same length of overlapping PUCCH slots/sub-slots for a single
-- PUCCH group only
dynamicPUCCH-CellSwitchSameLengthSingleGroup-r17 SEQUENCE {
pucch-Group-r17 ENUMERATED {primaryGroupOnly, secondaryGroupOnly, eitherPrimaryOrSecondaryGroup},
pucch-Group-Config-r17 PUCCH-Group-Config-r17
} OPTIONAL,
-- R1 25-10a: PUCCH cell switching based on dynamic indication for different length of overlapping PUCCH slots/sub-slots
-- for a single PUCCH group only
dynamicPUCCH-CellSwitchDiffLengthSingleGroup-r17 SEQUENCE {
pucch-Group-r17 ENUMERATED {primaryGroupOnly, secondaryGroupOnly, eitherPrimaryOrSecondaryGroup},
pucch-Group-Config-r17 PUCCH-Group-Config-r17
} OPTIONAL,
-- R1 25-10b: PUCCH cell switching based on dynamic indication for same length of overlapping PUCCH slots/sub-slots for two PUCCH
-- groups
dynamicPUCCH-CellSwitchSameLengthTwoGroups-r17 SEQUENCE (SIZE (1..maxTwoPUCCH-Grp-ConfigList-r17)) OF TwoPUCCH-Grp-Configurations-r17
OPTIONAL,
-- R1 25-10c: PUCCH cell switching based on dynamic indication for different length of overlapping PUCCH slots/sub-slots for two
-- PUCCH groups
dynamicPUCCH-CellSwitchDiffLengthTwoGroups-r17 SEQUENCE (SIZE (1..maxTwoPUCCH-Grp-ConfigList-r17)) OF TwoPUCCH-Grp-Configurations-r17
OPTIONAL,
-- R1 33-2a: ACK/NACK based HARQ-ACK feedback and RRC-based enabling/disabling ACK/NACK-based
-- feedback for dynamic scheduling for multicast
ack-NACK-FeedbackForMulticast-r17 ENUMERATED {supported} OPTIONAL,
-- R1 33-2d: PTP retransmission for multicast dynamic scheduling
ptp-Retx-Multicast-r17 ENUMERATED {supported} OPTIONAL,
-- R1 33-4: NACK-only based HARQ-ACK feedback for RRC-based enabling/disabling multicast with ACK/NACK transforming
nack-OnlyFeedbackForMulticast-r17 ENUMERATED {supported} OPTIONAL,
-- R1 33-4a: NACK-only based HARQ-ACK feedback for multicast corresponding to a specific sequence or a PUCCH transmission
nack-OnlyFeedbackSpecificResourceForMulticast-r17 ENUMERATED {supported} OPTIONAL,
-- R1 33-5-1a: ACK/NACK based HARQ-ACK feedback and RRC-based enabling/disabling ACK/NACK-based feedback
-- for SPS group-common PDSCH for multicast
ack-NACK-FeedbackForSPS-Multicast-r17 ENUMERATED {supported} OPTIONAL,
-- R1 33-5-1d: PTP retransmission for SPS group-common PDSCH for multicast
ptp-Retx-SPS-Multicast-r17 ENUMERATED {supported} OPTIONAL,
-- R4 26-1: Higher Power Limit CA DC
higherPowerLimit-r17 ENUMERATED {supported} OPTIONAL,
-- R1 39-4: Parallel MsgA and SRS/PUCCH/PUSCH transmissions across CCs in intra-band non-contiguous CA
parallelTxMsgA-SRS-PUCCH-PUSCH-intraBand-r17 ENUMERATED {supported} OPTIONAL,
-- R1 24-11a: Capability on the number of CCs for monitoring a maximum number of BDs and non-overlapped CCEs per span when
-- configured with DL CA with Rel-17 PDCCH monitoring capability on all the serving cells
pdcch-MonitoringCA-r17 INTEGER (4..16) OPTIONAL,
-- R1 24-11f: Capability on the number of CCs for monitoring a maximum number of BDs and non-overlapped CCEs for MCG and for SCG
-- when configured for NR-DC operation with Rel-17 PDCCH monitoring capability on all the serving cells
pdcch-BlindDetectionMCG-SCG-List-r17 SEQUENCE(SIZE(1..maxNrofPdcch-BlindDetection-r17)) OF PDCCH-BlindDetectionMCG-SCG-r17
OPTIONAL,
-- R1 24-11c: Number of carriers for CCE/BD scaling with DL CA with mix of Rel. 17 and Rel. 15 PDCCH monitoring capabilities on
-- different Carriers
-- R1 24-11g: Number of carriers for CCE/BD scaling for MCG and for SCG when configured for NR-DC operation with mix of Rel. 17 and
-- Rel. 15 PDCCH monitoring capabilities on different carriers
pdcch-BlindDetectionMixedList1-r17 SEQUENCE(SIZE(1..maxNrofPdcch-BlindDetection-r17)) OF PDCCH-BlindDetectionMixed-r17
OPTIONAL,
-- R1 24-11d: Number of carriers for CCE/BD scaling with DL CA with mix of Rel. 17 and Rel. 16 PDCCH monitoring capabilities on
-- different Carriers
-- R1 24-11h: Number of carriers for CCE/BD scaling for MCG and for SCG when configured for NR-DC operation with mix of Rel. 17 and
-- Rel. 16 PDCCH monitoring capabilities on different carriers
pdcch-BlindDetectionMixedList2-r17 SEQUENCE(SIZE(1..maxNrofPdcch-BlindDetection-r17)) OF PDCCH-BlindDetectionMixed-r17
OPTIONAL,
-- R1 24-11e: Number of carriers for CCE/BD scaling with DL CA with mix of Rel. 17, Rel. 16 and Rel. 15 PDCCH monitoring
-- capabilities on different carriers
-- R1 24-11i: Number of carriers for CCE/BD scaling for MCG and for SCG when configured for NR-DC operation with mix of Rel. 17,
-- Rel. 16 and Rel. 15 PDCCH monitoring capabilities on different carriers
pdcch-BlindDetectionMixedList3-r17 SEQUENCE(SIZE(1..maxNrofPdcch-BlindDetection-r17)) OF PDCCH-BlindDetectionMixed1-r17
OPTIONAL
}
CA-ParametersNR-v1730 ::= SEQUENCE {
-- R1 30-4a: DM-RS bundling for PUSCH repetition type A (per BC)
dmrs-BundlingPUSCH-RepTypeAPerBC-r17 ENUMERATED {supported} OPTIONAL,
-- R1 30-4b: DM-RS bundling for PUSCH repetition type B(per BC)
dmrs-BundlingPUSCH-RepTypeBPerBC-r17 ENUMERATED {supported} OPTIONAL,
-- R1 30-4c: DM-RS bundling for TB processing over multi-slot PUSCH(per BC)
dmrs-BundlingPUSCH-multiSlotPerBC-r17 ENUMERATED {supported} OPTIONAL,
-- R1 30-4d: DMRS bundling for PUCCH repetitions(per BC)
dmrs-BundlingPUCCH-RepPerBC-r17 ENUMERATED {supported} OPTIONAL,
-- R1 30-4g: Restart DM-RS bundling (per BC)
dmrs-BundlingRestartPerBC-r17 ENUMERATED {supported} OPTIONAL,
-- R1 30-4h: DM-RS bundling for non-back-to-back transmission (per BC)
dmrs-BundlingNonBackToBackTX-PerBC-r17 ENUMERATED {supported} OPTIONAL,
-- R1 39-3-1: Stay on the target CC for SRS carrier switching
stayOnTargetCC-SRS-CarrierSwitch-r17 ENUMERATED {supported} OPTIONAL,
-- R1 33-3-3a: FDM-ed Type-1 and Type-2 HARQ-ACK codebooks for multiplexing HARQ-ACK for unicast and HARQ-ACK for multicast
fdm-CodebookForMux-UnicastMulticastHARQ-ACK-r17 ENUMERATED {supported} OPTIONAL,
-- R1 33-3-3b: Mode 2 TDM-ed Type-1 and Type-2 HARQ-ACK codebook for multiplexing HARQ-ACK for unicast and HARQ-ACK for multicast
mode2-TDM-CodebookForMux-UnicastMulticastHARQ-ACK-r17 ENUMERATED {supported} OPTIONAL,
-- R1 33-3-4: Mode 1 for type1 codebook generation
mode1-ForType1-CodebookGeneration-r17 ENUMERATED {supported} OPTIONAL,
-- R1 33-5-1j: NACK-only based HARQ-ACK feedback for multicast corresponding to a specific sequence or a PUCCH transmission
-- for SPS group-commmon PDSCH for multicast
nack-OnlyFeedbackSpecificResourceForSPS-Multicast-r17 ENUMERATED {supported} OPTIONAL,
-- R1 33-8-2: Up to 2 PUCCH resources configuration for multicast feedback for dynamically scheduled multicast
multiPUCCH-ConfigForMulticast-r17 ENUMERATED {supported} OPTIONAL,
-- R1 33-8-3: PUCCH resource configuration for multicast feedback for SPS GC-PDSCH
pucch-ConfigForSPS-Multicast-r17 ENUMERATED {supported} OPTIONAL,
-- The following parameter is associated with R1 33-2a, R1 33-3-3a, and R1 33-3-3b, and is not a RAN1 FG.
maxNumberG-RNTI-HARQ-ACK-Codebook-r17 INTEGER (1..4) OPTIONAL,
-- R1 33-3-5: Feedback multiplexing for unicast PDSCH and group-common PDSCH for multicast with same priority and different codebook
-- type
mux-HARQ-ACK-UnicastMulticast-r17 ENUMERATED {supported} OPTIONAL
}
CA-ParametersNR-v1740 ::= SEQUENCE {
-- R1 33-5-1f: NACK-only based HARQ-ACK feedback for multicast RRC-based enabling/disabling NACK-only based feedback
-- for SPS group-common PDSCH for multicast
nack-OnlyFeedbackForSPS-Multicast-r17 ENUMERATED {supported} OPTIONAL,
-- R1 33-8-1: PUCCH resource configuration for multicast feedback for dynamically scheduled multicast
singlePUCCH-ConfigForMulticast-r17 ENUMERATED {supported} OPTIONAL
}
CA-ParametersNR-v1760 ::= SEQUENCE {
prioSCellPRACH-OverSP-PeriodicSRS-Support-r17 ENUMERATED {supported} OPTIONAL
}
CA-ParametersNR-v1770 ::= SEQUENCE {
parallelTxPUCCH-PUSCH-SamePriority-r17 ENUMERATED {supported} OPTIONAL
}
CA-ParametersNR-v1780 ::= SEQUENCE {
parallelTxPUCCH-PUSCH-SamePriority-r17 ENUMERATED {supported} OPTIONAL,
supportedAggBW-FR1-r17 SEQUENCE {
scalingFactorSCS-r17 ENUMERATED {true} OPTIONAL,
supportedAggBW-FDD-DL-r17 SupportedAggBandwidth-r17 OPTIONAL,
supportedAggBW-FDD-UL-r17 SupportedAggBandwidth-r17 OPTIONAL,
supportedAggBW-TDD-DL-r17 SupportedAggBandwidth-r17 OPTIONAL,
supportedAggBW-TDD-UL-r17 SupportedAggBandwidth-r17 OPTIONAL,
supportedAggBW-TotalDL-r17 SupportedAggBandwidth-r17 OPTIONAL,
supportedAggBW-TotalUL-r17 SupportedAggBandwidth-r17 OPTIONAL
} OPTIONAL
}
CA-ParametersNR-v1800 ::= SEQUENCE {
codebookParametersetype2DopplerCSI-PerBC-r18 CodebookParametersetype2DopplerCSI-r18 OPTIONAL,
codebookParametersfetype2DopplerCSI-PerBC-r18 CodebookParametersfetype2DopplerCSI-r18 OPTIONAL,
codebookParametersetype2CJT-PerBC-r18 CodebookParametersetype2CJT-r18 OPTIONAL,
codebookParametersfetype2CJT-PerBC-r18 CodebookParametersfetype2CJT-r18 OPTIONAL,
codebookComboParametersCJT-PerBC-r18 CodebookComboParametersCJT-r18 OPTIONAL,
codebookParametersHARQ-ACK-PUSCH-PerBC-r18 CodebookParametersHARQ-ACK-PUSCH-r18 OPTIONAL,
-- R1 40-2-8: Maximum number of TAGs across all CCs
maxNumberTAG-AcrossCC-r18 INTEGER (2..4) OPTIONAL,
-- R1 40-3-3-1: TDCP (Time Domain Channel Properties) report
tdcp-ReportPerBC-r18 SEQUENCE {
valueX-r18 INTEGER (1..2),
maxNumberActiveResource-r18 INTEGER (2..32)
} OPTIONAL,
-- R1 40-3-3-5: Number of CSI-RS resources for TDCP
tdcp-ResourcePerBC-r18 SEQUENCE {
maxNumberConfigPerCC-r18 ENUMERATED {n2,n4,n6,n8,n10,n12},
maxNumberConfigAcrossCC-r18 INTEGER (1..32),
maxNumberSimultaneousPerCC-r18 ENUMERATED {n2, n4, n6, n8, n12, n16, n20, n24, n28, n32}
} OPTIONAL,
-- R1 40-3-1-24: Timeline for regular eType-II-CJT CSI, or for port selection FeType-II-CJT CSI
timelineRelax-CJT-CSI-CA-r18 ENUMERATED {n0,n2} OPTIONAL,
-- R1 42-1: Spatial domain adaptation with CSI feedback based on CSI report sub-configuration(s) for periodic CSI reporting
spatialAdaptation-CSI-FeedbackPerBC-r18 SEQUENCE {
maxNumberCSI-ResourceAcrossCC-r18 SEQUENCE {
sdType1-Resource-r18 ENUMERATED {n5, n6, n7, n8, n9, n10, n12, n14, n16, n18, n20, n22,
n24, n26, n28, n30, n32, n34, n36, n38, n40, n42, n44,
n46, n48, n50, n52, n54, n56, n58, n60, n62, n64},
sdType2-Resource-r18 ENUMERATED {n5, n6, n7, n8, n9, n10, n12, n14, n16, n18, n20, n22,
n24, n26, n28, n30, n32, n34, n36, n38, n40, n42, n44,
n46, n48, n50, n52, n54, n56, n58, n60, n62, n64}
},
maxNumberPortsAcrossCC-r18 SEQUENCE {
sdType1-Resource-r18 INTEGER (1..32),
sdType2-Resource-r18 INTEGER (1..32)
}
} OPTIONAL,
-- R1 40-7-2a: Association between CSI-RS and SRS for non-codebook case
nonCodebook-CSI-RS-SRS-PerBC-r18 SEQUENCE (SIZE (1.. maxNrofCSI-RS-Resources)) OF SupportedCSI-RS-Resource OPTIONAL,
-- R1 42-1a: Spatial domain adaptation with CSI feedback based on CSI report sub-configuration(s) for periodic CSI reporting on
-- PUSCH
spatialAdaptation-CSI-FeedbackPUSCH-PerBC-r18 SEQUENCE {
maxNumberCSI-ResourceAcrossCC-r18 ENUMERATED {n5, n6, n7, n8, n9, n10, n12, n14, n16, n18, n20, n22, n24, n26, n28,
n30, n32, n34, n36, n38, n40, n42, n44, n46, n48, n50, n52, n54,
n56, n58, n60, n62, n64},
maxNumberPortsAcrossCC-r18 INTEGER (1..32)
} OPTIONAL,
-- R1 42-1b: Spatial domain adaptation with CSI feedback based on CSI report sub-configuration(s) for aperiodic CSI reporting
spatialAdaptation-CSI-FeedbackAperiodicPerBC-r18 SEQUENCE {
maxNumberCSI-ResourceAcrossCC-r18 SEQUENCE {
sdType1-Resource-r18 ENUMERATED {n5, n6, n7, n8, n9, n10, n12, n14, n16, n18, n20, n22,
n24, n26, n28, n30, n32, n34, n36, n38, n40, n42, n44,
n46, n48, n50, n52, n54, n56, n58, n60, n62, n64},
sdType2-Resource-r18 ENUMERATED {n5, n6, n7, n8, n9, n10, n12, n14, n16, n18, n20, n22,
n24, n26, n28, n30, n32, n34, n36, n38, n40, n42, n44,
n46, n48, n50, n52, n54, n56, n58, n60, n62, n64}
},
maxNumberPortsAcrossCC-r18 SEQUENCE {
sdType1-Resource-r18 INTEGER (1..32),
sdType2-Resource-r18 INTEGER (1..32) }
} OPTIONAL,
-- R1 42-1c: Spatial domain adaptation with CSI feedback based on CSI report sub-configuration(s) for semi-persistent CSI
-- reporting on PUCCH
spatialAdaptation-CSI-FeedbackPUCCH-PerBC-r18 SEQUENCE {
maxNumberCSI-ResourceAcrossCC-r18 ENUMERATED {n5, n6, n7, n8, n9, n10, n12, n14, n16, n18, n20, n22, n24, n26, n28,
n30, n32, n34, n36, n38, n40, n42, n44, n46, n48, n50, n52, n54,
n56, n58, n60, n62, n64},
maxNumberPortsAcrossCC-r18 INTEGER (1..32)
} OPTIONAL,
-- R1 42-2: Spatial domain adaptation with CSI feedback based on CSI report sub-configuration(s) for periodic CSI reporting
powerAdaptation-CSI-FeedbackPerBC-r18 SEQUENCE {
maxNumberCSI-ResourceAcrossCC-r18 ENUMERATED {n5, n6, n7, n8, n9, n10, n12, n14, n16, n18, n20, n22, n24, n26, n28,
n30, n32, n34, n36, n38, n40, n42, n44, n46, n48, n50, n52, n54,
n56, n58, n60, n62, n64},
maxNumberPortsAcrossCC-r18 INTEGER (1..32)
} OPTIONAL,
-- R1 42-2a: Spatial domain adaptation with CSI feedback based on CSI report sub-configuration(s) for periodic CSI reporting on PUSCH
powerAdaptation-CSI-FeedbackPUSCH-PerBC-r18 SEQUENCE {
maxNumberCSI-ResourceAcrossCC-r18 ENUMERATED {n5, n6, n7, n8, n9, n10, n12, n14, n16, n18, n20, n22, n24, n26, n28,
n30, n32, n34, n36, n38, n40, n42, n44, n46, n48, n50, n52, n54,
n56, n58, n60, n62, n64},
maxNumberPortsAcrossCC-r18 INTEGER (1..32)
} OPTIONAL,
-- R1 42-2b: Spatial domain adaptation with CSI feedback based on CSI report sub-configuration(s) for aperiodic CSI reporting
powerAdaptation-CSI-FeedbackAperiodicPerBC-r18 SEQUENCE {
maxNumberCSI-ResourceAcrossCC-r18 ENUMERATED {n5, n6, n7, n8, n9, n10, n12, n14, n16, n18, n20, n22, n24, n26, n28,
n30, n32, n34, n36, n38, n40, n42, n44, n46, n48, n50, n52, n54,
n56, n58, n60, n62, n64},
maxNumberPortsAcrossCC-r18 INTEGER (1..32)
} OPTIONAL,
-- R1 42-2c: Spatial domain adaptation with CSI feedback based on CSI report sub-configuration(s) for semi-persistent CSI
-- reporting on PUCCH
powerAdaptation-CSI-FeedbackPUCCH-PerBC-r18 SEQUENCE {
maxNumberCSI-ResourceAcrossCC-r18 ENUMERATED {n5, n6, n7, n8, n9, n10, n12, n14, n16, n18, n20, n22, n24, n26, n28,
n30, n32, n34, n36, n38, n40, n42, n44, n46, n48, n50, n52, n54,
n56, n58, n60, n62, n64},
maxNumberPortsAcrossCC-r18 INTEGER (1..32)
} OPTIONAL,
-- R1 42-7: Mixed codebook combination for spatial domain adaptation with CSI feedback based on CSI report sub-configuration(s),
-- each containing one port subset configuration
mixCodeBookSpatialAdaptationPerBC-r18 SEQUENCE (SIZE (1.. maxNrofCSI-RS-Resources)) OF SupportedCSI-RS-Resource OPTIONAL,
-- R1 42-9: Indicates whether the UE supports CSI report framework and the number of CSI report(s) which the UE can
-- simultaneously process across all CCs, and across MCG and SCG in case of NR-DC.
simultaneousCSI-SubReportsAllCC-r18 INTEGER (5..32) OPTIONAL,
-- R1 49-1: Multi-cell PDSCH scheduling by DCI format 1_3 on a scheduling cell with same SCS between scheduling
-- cell and cells in the set
multiCell-PDSCH-DCI-1-3-SameSCS-r18 SEQUENCE {
coScheduledCellSCS-r18 SEQUENCE {
nonSharedSpectrum-fdd-fr1 ENUMERATED {supported} OPTIONAL,
nonSharedSpectrum-tdd-fr1 ENUMERATED {supported} OPTIONAL,
sharedSpectrum-tdd-fr1 ENUMERATED {supported} OPTIONAL,
fr2-1 ENUMERATED {supported} OPTIONAL,
fr2-2 ENUMERATED {supported} OPTIONAL
},
maxNumberCoScheduledCell-r18 INTEGER (2..4),
maxNumberSetsOfCellAcrossPUCCH-Group-r18 INTEGER (1..8),
maxNumberSetsOfCellScheduling-r18 INTEGER (1..4),
harqFeedbackType-r18 ENUMERATED {type1, type2, type1And2},
coScheduledCellIndicationScheme-r18 ENUMERATED {fdra,cellInd, both},
supportOfSearchSpace-r18 ENUMERATED {supported} OPTIONAL,
licensed-fdd-tdd-fr1-r18 ENUMERATED {supported} OPTIONAL
} OPTIONAL,
-- R1 49-1b: Multi-cell PDSCH scheduling by DCI format 1_3 on a scheduling cell not included in a set of cells with different
-- SCS/carrier type between scheduling cell and cells in the set
multiCell-PDSCH-DCI-1-3-DiffSCS-r18 SEQUENCE {
coScheduledCellSCS-r18 ENUMERATED {lowScheduling-highScheduled, highScheduling-lowScheduled, both},
combinationCarrierType-r18 SEQUENCE (SIZE(1..maxSchedulingBandCombination-r18)) OF
CombinationCarrierType-r18,
maxNumberCoScheduledCell-r18 INTEGER (2..4),
maxNumberSetsOfCellAcrossPUCCH-Group-r18 INTEGER (1..8),
maxNumberSetsOfCellScheduling-r18 INTEGER (1..4),
harqFeedbackType-r18 ENUMERATED {type1, type2, type1And2},
coScheduledCellIndicationScheme-r18 ENUMERATED {fdra,cellInd, both}
} OPTIONAL,
-- R1 49-2: Multi-cell PUSCH scheduling by DCI format 0_3 on a scheduling cell with same SCS between scheduling cell
-- and cells in the set
multiCell-PUSCH-DCI-0-3-SameSCS-r18 SEQUENCE {
coScheduledCellSCS-r18 SEQUENCE {
nonSharedSpectrum-fdd-fr1 ENUMERATED {supported} OPTIONAL,
nonSharedSpectrum-tdd-fr1 ENUMERATED {supported} OPTIONAL,
sharedSpectrum-tdd-fr1 ENUMERATED {supported} OPTIONAL,
fr2-1 ENUMERATED {supported} OPTIONAL,
fr2-2 ENUMERATED {supported} OPTIONAL
},
maxNumberCoScheduledCell-r18 INTEGER (2..4),
maxNumberSetsOfCellAcrossPUCCH-Group-r18 INTEGER (1..8),
maxNumberSetsOfCellScheduling-r18 INTEGER (1..4),
coScheduledCellIndicationScheme-r18 ENUMERATED {fdra,cellInd, both},
supportOfSearchSpace-r18 ENUMERATED {supported} OPTIONAL,
licensed-fdd-tdd-fr1-r18 ENUMERATED {supported} OPTIONAL
} OPTIONAL,
-- R1 49-2b: Multi-cell PUSCH scheduling by DCI format 0_3 on a scheduling cell not included in a set of cells with
-- different SCS/carrier type between scheduling cell and cells in the set
multiCell-PUSCH-DCI-0-3-DiffSCS-r18 SEQUENCE {
coScheduledCellSCS-r18 ENUMERATED {lowScheduling-highScheduled, highScheduling-lowScheduled, both},
combinationCarrierType-r18 SEQUENCE (SIZE(1..maxSchedulingBandCombination-r18)) OF
CombinationCarrierType-r18,
maxNumberCoScheduledCell-r18 INTEGER (2..4),
maxNumberSetsOfCellAcrossPUCCH-Group-r18 INTEGER (1..8),
maxNumberSetsOfCellScheduling-r18 INTEGER (1..4),
coScheduledCellIndicationScheme-r18 ENUMERATED {fdra,cellInd, both}
} OPTIONAL,
-- R1 49-3x: Advanced UE capability for larger number of unicast DL DCI
advUnicastDCI-DL-r18 SEQUENCE {
scs-15kHz-120kHz-r18 ENUMERATED {n2, n4} OPTIONAL,
scs-15kHz-60kHz-r18 ENUMERATED {n2, n4} OPTIONAL,
scs-30kHz-120kHz-r18 ENUMERATED {n2, n4} OPTIONAL,
scs-15kHz-30kHz-r18 ENUMERATED {n2} OPTIONAL,
scs-30kHz-60kHz-r18 ENUMERATED {n2} OPTIONAL,
scs-60kHz-120kHz-r18 ENUMERATED {n2} OPTIONAL
} OPTIONAL,
-- R1 49-3y: Advanced UE capability for larger number of unicast UL DCI
advUnicastDCI-UL-r18 SEQUENCE {
scs-15kHz-120kHz-r18 ENUMERATED {n2, n4} OPTIONAL,
scs-15kHz-60kHz-r18 ENUMERATED {n2, n4} OPTIONAL,
scs-30kHz-120kHz-r18 ENUMERATED {n2, n4} OPTIONAL,
scs-15kHz-30kHz-r18 ENUMERATED {n2} OPTIONAL,
scs-30kHz-60kHz-r18 ENUMERATED {n2} OPTIONAL,
scs-60kHz-120kHz-r18 ENUMERATED {n2} OPTIONAL
} OPTIONAL,
-- R1 49-5a: Trigger Type 3 HARQ CB based feedback using DCI format 1_3
type3HARQ-CB-DCI-1-3-r18 ENUMERATED {supported} OPTIONAL,
-- R1 49-5b: Trigger enhanced Type 3 HARQ CB based feedback using DCI format 1_3
type3EnhHARQ-CB-DCI-1-3-r18 SEQUENCE {
numberOfCodebook-r18 ENUMERATED {n1, n2, n4, n8},
maxNumberPUCCH-Trans-r18 INTEGER (1..7)
} OPTIONAL,
-- R1 49-9: SCell dormancy indication within active time in DCI format 0_3/1_3
scellDormancyWithinActiveTime-DCI-0-3-And-1-3-r18 ENUMERATED {supported} OPTIONAL,
pdcch-MonitoringCA-Ext-r18 CHOICE {
-- R1 55-6a: Capability on the number of CCs for monitoring a maximum number of BDs and non-overlapped CCEs per span when
-- configured with DL CA with Rel-16 PDCCH monitoring capability on all the serving cells
pdcch-MonitoringCA-r18 SEQUENCE {
maxNumberOfMonitoringCC-r18 INTEGER (2..16),
supportedSpanArrangement-r18 ENUMERATED {alignedOnly, alignedAndNonAligned}
},
-- R1 55-6f: Capability on the number of CCs for monitoring a maximum number of BDs and non-overlapped CCEs per span when
-- configured with DL CA with Rel-16 PDCCH monitoring capability on all the serving cells with restriction for non-aligned
-- span case
pdcch-MonitoringCA-NonAlignedSpan-r18 INTEGER (2..16)
} OPTIONAL,
pdcch-BlindDetectionCA-MixedExt-r18 CHOICE {
-- R1 55-6c: Number of carriers for CCE/BD scaling with DL CA with mix of Rel. 16 and Rel. 15 PDCCH monitoring capabilities on
-- different carriers
pdcch-BlindDetectionCA-Mixed-r18 SEQUENCE {
blindDetectionCA-Mixed-r18 SEQUENCE(SIZE (1..maxNrofPdcch-BlindDetectionMixed-1-r16)) OF
PDCCH-BlindDetectionCA-MixedExt-r16,
supportedSpanArrangement-r18 ENUMERATED{ alignedOnly, alignedAndNonAligned }
},
-- R1 55-6g: Number of carriers for CCE/BD scaling with DL CA with mix of Rel. 16 and Rel. 15 PDCCH monitoring capabilities on
-- different carriers with restriction for non-aligned span case
pdcch-BlindDetectionCA-Mixed-NonAlignedSpan-r18 SEQUENCE(SIZE (1..maxNrofPdcch-BlindDetectionMixed-1-r16)) OF
PDCCH-BlindDetectionCA-MixedExt-r16
} OPTIONAL,
-- R1 55-6e: Number of carriers for CCE/BD scaling for MCG and for SCG when configured for NR-DC operation with mix of Rel. 16
-- and Rel. 15 PDCCH monitoring capabilities on different carriers
pdcch-BlindDetectionMCG-SCG-List-r18 SEQUENCE(SIZE (1..maxNrofPdcch-BlindDetectionMixed-1-r16)) OF
PDCCH-BlindDetectionMixed2-r18 OPTIONAL,
-- R4 33-1: Support of intra-band non-collocated NR CA operation
intraBandNR-CA-non-collocated-r18 ENUMERATED {supported} OPTIONAL
}
CA-ParametersNR-v1830 ::= SEQUENCE {
-- R1 45-1: Intra-frequency L1 measurement and reports for L1-L2 Triggered Mobility (LTM) procedure
intraFreqL1-MeasConfig-r18 SEQUENCE {
supportedMaxIntraFreqCellsConfig-r18 INTEGER (1..8),
supportedMaxIntraFreqCellsPerReport-r18 INTEGER (1..4),
supportedMaxReportBeamsPerReportedCell-r18 INTEGER (1..4),
supportedMaxReportBeamsReports-r18 ENUMERATED {n1,n2,n3,n4,n6,n8,n9,n12,n16},
supportedMaxAperiodic-LTM-CSI-ReportConfig-r18 INTEGER (0..4),
supportedMaxPeriodic-LTM-CSI-ReportConfig-r18 INTEGER (1..4),
supportedMaxSemiPersistent-LTM-CSI-ReportConfig-r18 INTEGER (0..4)
} OPTIONAL,
-- R1 45-1a: Inter-frequency L1 measurement and reports for L1-L2 Triggered Mobility (LTM) procedure
interFreqL1-MeasConfig-r18 SEQUENCE {
supportedMaxIntraInterFreqCellsConfig-r18 INTEGER (1..8),
supportedMaxIntraInterFreqCellsPerReport-r18 INTEGER (1..4),
supportedMaxIntraInterFreqBeamsPerCellReports-r18 INTEGER (1..4),
supportedMaxIntraInterFreqBeamsReports-r18 ENUMERATED {n1,n2,n3,n4,n6,n8,n9,n12,n16}
} OPTIONAL,
-- R1 45-2: Inclusion of current SpCell in the L1 measurement report
currentSpCellInclL1-Report-r18 ENUMERATED {supported} OPTIONAL,
-- R4 39-1: SSB based L1-RSRP measurements for multiple cells with RTD > CP
multiCellL1-measRTD-greaterThan-CP-r18 ENUMERATED {supported} OPTIONAL,
-- R4 39-2: SSB based inter-frequency L1-RSRP measurements without measurement gaps
interFreqSSB-L1-MeasWithoutGaps-r18 ENUMERATED {supported} OPTIONAL,
-- R4 39-3-1: Number of frequency layers for L1-RSRP measurement
maxFreqLayersL1-Meas-r18 SEQUENCE {
supportedMaxIntraInterFreqLayersWithoutGaps-r18 INTEGER (1..8) OPTIONAL,
supportedMaxInterFreqLayersWithGaps-r18 INTEGER (1..8) OPTIONAL
} OPTIONAL,
-- R4 39-3-2: Number of neighbour cells to be measured per frequency layer
maxNeighCellsPerFreqLayerL1-Meas-r18 SEQUENCE {
supportedMaxNeighCellsPerFreqLayersWithoutGaps-r18 INTEGER (1..8) OPTIONAL,
supportedMaxNeighCellsPerFreqLayersWithGaps-r18 INTEGER (1..8) OPTIONAL
} OPTIONAL,
-- R4 39-3-3: Number of total cells to be measured
supportedMaxCellsWithoutGapsL1-Meas-r18 INTEGER (1..24) OPTIONAL,
-- R4 39-3-4: Number of SSB resources for L1-RSRP measurement within a slot
supportedMaxSSB-WithinSlotL1-Meas-r18 ENUMERATED {n1,n2,n3,n4,n5,n6,n7,n8,n16,n32,n48,n64} OPTIONAL,
-- R4 39-3-5: Number of SSB resources for L1-RSRP measurement per frequency layer
maxSSB-PerFreqLayerL1-Meas-r18 SEQUENCE {
supportedMaxSSB-PerFreqLayerWithoutGaps-r18 INTEGER (1..8) OPTIONAL,
supportedMaxSSB-PerFreqLayerWithGaps-r18 INTEGER (1..8) OPTIONAL
} OPTIONAL,
-- R4 39-3-6: Number of total SSB resources to be measured
supportedMaxSSB-L1-Meas-r18 ENUMERATED {n2,n4,n8,n12,n16,n32,n64} OPTIONAL,
-- R1 49-13: Default QCL assumption for multi-cell scheduling by DCI format 1_3
qcl-MultiCellDCI-1-3-r18 ENUMERATED {diff, both} OPTIONAL,
-- R1 49-14: Support of BWP switch indication by DCI format 0_3/1_3
bwp-SwitchingDCI-0-3-And-1-3-r18 ENUMERATED {supported} OPTIONAL
}
CrossCarrierSchedulingSCell-SpCell-r17 ::= SEQUENCE {
supportedSCS-Combinations-r17 SEQUENCE {
scs15kHz-15kHz-r17 ENUMERATED {supported} OPTIONAL,
scs15kHz-30kHz-r17 ENUMERATED {supported} OPTIONAL,
scs15kHz-60kHz-r17 ENUMERATED {supported} OPTIONAL,
scs30kHz-30kHz-r17 BIT STRING (SIZE (1..496)) OPTIONAL,
scs30kHz-60kHz-r17 BIT STRING (SIZE (1..496)) OPTIONAL,
scs60kHz-60kHz-r17 BIT STRING (SIZE (1..496)) OPTIONAL
},
pdcch-MonitoringOccasion-r17 ENUMERATED {val1, val2}
}
PDCCH-BlindDetectionMixedList-r16::= SEQUENCE {
pdcch-BlindDetectionCA-MixedExt-r16 CHOICE {
pdcch-BlindDetectionCA-Mixed-v16a0 PDCCH-BlindDetectionCA-MixedExt-r16,
pdcch-BlindDetectionCA-Mixed-NonAlignedSpan-v16a0 PDCCH-BlindDetectionCA-MixedExt-r16
} OPTIONAL,
pdcch-BlindDetectionCG-UE-MixedExt-r16 SEQUENCE{
pdcch-BlindDetectionMCG-UE-Mixed-v16a0 PDCCH-BlindDetectionCG-UE-MixedExt-r16,
pdcch-BlindDetectionSCG-UE-Mixed-v16a0 PDCCH-BlindDetectionCG-UE-MixedExt-r16
} OPTIONAL
}
PDCCH-BlindDetectionCA-MixedExt-r16 ::= SEQUENCE {
pdcch-BlindDetectionCA1-r16 INTEGER (1..15),
pdcch-BlindDetectionCA2-r16 INTEGER (1..15)
}
PDCCH-BlindDetectionCG-UE-MixedExt-r16 ::= SEQUENCE {
pdcch-BlindDetectionCG-UE1-r16 INTEGER (0..15),
pdcch-BlindDetectionCG-UE2-r16 INTEGER (0..15)
}
PDCCH-BlindDetectionMCG-SCG-r17 ::= SEQUENCE {
pdcch-BlindDetectionMCG-UE-r17 INTEGER (1..15),
pdcch-BlindDetectionSCG-UE-r17 INTEGER (1..15)
}
PDCCH-BlindDetectionMixed-r17::= SEQUENCE {
pdcch-BlindDetectionCA-Mixed-r17 PDCCH-BlindDetectionCA-Mixed-r17 OPTIONAL,
pdcch-BlindDetectionCG-UE-Mixed-r17 SEQUENCE{
pdcch-BlindDetectionMCG-UE-Mixed-v17 PDCCH-BlindDetectionCG-UE-Mixed-r17,
pdcch-BlindDetectionSCG-UE-Mixed-v17 PDCCH-BlindDetectionCG-UE-Mixed-r17
} OPTIONAL
}
PDCCH-BlindDetectionCG-UE-Mixed-r17 ::= SEQUENCE {
pdcch-BlindDetectionCG-UE1-r17 INTEGER (0..15),
pdcch-BlindDetectionCG-UE2-r17 INTEGER (0..15)
}
PDCCH-BlindDetectionCA-Mixed-r17 ::= SEQUENCE {
pdcch-BlindDetectionCA1-r17 INTEGER (1..15) OPTIONAL,
pdcch-BlindDetectionCA2-r17 INTEGER (1..15) OPTIONAL
}
PDCCH-BlindDetectionMixed1-r17::= SEQUENCE {
pdcch-BlindDetectionCA-Mixed1-r17 PDCCH-BlindDetectionCA-Mixed1-r17 OPTIONAL,
pdcch-BlindDetectionCG-UE-Mixed1-r17 SEQUENCE{
pdcch-BlindDetectionMCG-UE-Mixed1-v17 PDCCH-BlindDetectionCG-UE-Mixed1-r17,
pdcch-BlindDetectionSCG-UE-Mixed1-v17 PDCCH-BlindDetectionCG-UE-Mixed1-r17
} OPTIONAL
}
PDCCH-BlindDetectionCG-UE-Mixed1-r17 ::= SEQUENCE {
pdcch-BlindDetectionCG-UE1-r17 INTEGER (0..15),
pdcch-BlindDetectionCG-UE2-r17 INTEGER (0..15),
pdcch-BlindDetectionCG-UE3-r17 INTEGER (0..15)
}
PDCCH-BlindDetectionCA-Mixed1-r17 ::= SEQUENCE {
pdcch-BlindDetectionCA1-r17 INTEGER (1..15) OPTIONAL,
pdcch-BlindDetectionCA2-r17 INTEGER (1..15) OPTIONAL,
pdcch-BlindDetectionCA3-r17 INTEGER (1..15) OPTIONAL
}
PDCCH-BlindDetectionMixed2-r18 ::= SEQUENCE{
pdcch-BlindDetectionMCG-UE-Mixed-r18 PDCCH-BlindDetectionCG-UE-MixedExt-r16,
pdcch-BlindDetectionSCG-UE-Mixed-r18 PDCCH-BlindDetectionCG-UE-MixedExt-r16
}
SimulSRS-ForAntennaSwitching-r16 ::= SEQUENCE {
supportSRS-xTyR-xLessThanY-r16 ENUMERATED {supported} OPTIONAL,
supportSRS-xTyR-xEqualToY-r16 ENUMERATED {supported} OPTIONAL,
supportSRS-AntennaSwitching-r16 ENUMERATED {supported} OPTIONAL
}
TwoPUCCH-Grp-Configurations-r16 ::= SEQUENCE {
pucch-PrimaryGroupMapping-r16 TwoPUCCH-Grp-ConfigParams-r16,
pucch-SecondaryGroupMapping-r16 TwoPUCCH-Grp-ConfigParams-r16
}
TwoPUCCH-Grp-Configurations-r17 ::= SEQUENCE {
primaryPUCCH-GroupConfig-r17 PUCCH-Group-Config-r17,
secondaryPUCCH-GroupConfig-r17 PUCCH-Group-Config-r17
}
TwoPUCCH-Grp-ConfigParams-r16 ::= SEQUENCE {
pucch-GroupMapping-r16 PUCCH-Grp-CarrierTypes-r16,
pucch-TX-r16 PUCCH-Grp-CarrierTypes-r16
}
CarrierTypePair-r16 ::= SEQUENCE {
carrierForCSI-Measurement-r16 PUCCH-Grp-CarrierTypes-r16,
carrierForCSI-Reporting-r16 PUCCH-Grp-CarrierTypes-r16
}
PUCCH-Grp-CarrierTypes-r16 ::= SEQUENCE {
fr1-NonSharedTDD-r16 ENUMERATED {supported} OPTIONAL,
fr1-SharedTDD-r16 ENUMERATED {supported} OPTIONAL,
fr1-NonSharedFDD-r16 ENUMERATED {supported} OPTIONAL,
fr2-r16 ENUMERATED {supported} OPTIONAL
}
PUCCH-Group-Config-r17 ::= SEQUENCE {
fr1-FR1-NonSharedTDD-r17 ENUMERATED {supported} OPTIONAL,
fr2-FR2-NonSharedTDD-r17 ENUMERATED {supported} OPTIONAL,
fr1-FR2-NonSharedTDD-r17 ENUMERATED {supported} OPTIONAL
}
CombinationCarrierType-r18 ::= SEQUENCE {
schedulingCellCarrierType-r18 ENUMERATED {licensed-fdd-fr1, licensed-tdd-fr1, unlicensed-tdd-fr1, fr2-1, fr2-2},
scheduledCellCarrierType-r18 ENUMERATED {licensed-fdd-fr1, licensed-tdd-fr1, unlicensed-tdd-fr1, fr2-1, fr2-2}
}
-- TAG-CA-PARAMETERSNR-STOP
-- ASN1STOP
– CA-ParametersNRDC
The IE CA-ParametersNRDC contains dual connectivity related capabilities that are defined per band combination.
CA-ParametersNRDC information element
-- ASN1START
-- TAG-CA-PARAMETERS-NRDC-START
CA-ParametersNRDC ::= SEQUENCE {
ca-ParametersNR-ForDC CA-ParametersNR OPTIONAL,
ca-ParametersNR-ForDC-v1540 CA-ParametersNR-v1540 OPTIONAL,
ca-ParametersNR-ForDC-v1550 CA-ParametersNR-v1550 OPTIONAL,
ca-ParametersNR-ForDC-v1560 CA-ParametersNR-v1560 OPTIONAL,
featureSetCombinationDC FeatureSetCombinationId OPTIONAL
}
CA-ParametersNRDC-v15g0 ::= SEQUENCE {
ca-ParametersNR-ForDC-v15g0 CA-ParametersNR-v15g0 OPTIONAL
}
CA-ParametersNRDC-v1610 ::= SEQUENCE {
-- R1 18-1: Semi-static power sharing mode1 between MCG and SCG cells of same FR for NR dual connectivity
intraFR-NR-DC-PwrSharingMode1-r16 ENUMERATED {supported} OPTIONAL,
-- R1 18-1a: Semi-static power sharing mode 2 between MCG and SCG cells of same FR for NR dual connectivity
intraFR-NR-DC-PwrSharingMode2-r16 ENUMERATED {supported} OPTIONAL,
-- R1 18-1b: Dynamic power sharing between MCG and SCG cells of same FR for NR dual connectivity
intraFR-NR-DC-DynamicPwrSharing-r16 ENUMERATED {short, long} OPTIONAL,
asyncNRDC-r16 ENUMERATED {supported} OPTIONAL
}
CA-ParametersNRDC-v1630 ::= SEQUENCE {
ca-ParametersNR-ForDC-v1610 CA-ParametersNR-v1610 OPTIONAL,
ca-ParametersNR-ForDC-v1630 CA-ParametersNR-v1630 OPTIONAL
}
CA-ParametersNRDC-v1640 ::= SEQUENCE {
ca-ParametersNR-ForDC-v1640 CA-ParametersNR-v1640 OPTIONAL
}
CA-ParametersNRDC-v1650 ::= SEQUENCE {
supportedCellGrouping-r16 BIT STRING (SIZE (1..maxCellGroupings-r16)) OPTIONAL
}
CA-ParametersNRDC-v16a0 ::= SEQUENCE {
ca-ParametersNR-ForDC-v16a0 CA-ParametersNR-v16a0 OPTIONAL
}
CA-ParametersNRDC-v16j0 ::= SEQUENCE {
ca-ParametersNR-ForDC-v16j0 CA-ParametersNR-v1690 OPTIONAL
}
CA-ParametersNRDC-v1700 ::= SEQUENCE {
-- R1 31-9: Indicates the support of simultaneous transmission and reception of an IAB-node from multiple parent nodes
simultaneousRxTx-IAB-MultipleParents-r17 ENUMERATED {supported} OPTIONAL,
condPSCellAdditionNRDC-r17 ENUMERATED {supported} OPTIONAL,
scg-ActivationDeactivationNRDC-r17 ENUMERATED {supported} OPTIONAL,
scg-ActivationDeactivationResumeNRDC-r17 ENUMERATED {supported} OPTIONAL,
beamManagementType-CBM-r17 ENUMERATED {supported} OPTIONAL
}
CA-ParametersNRDC-v1720 ::= SEQUENCE {
ca-ParametersNR-ForDC-v1700 CA-ParametersNR-v1700 OPTIONAL,
ca-ParametersNR-ForDC-v1720 CA-ParametersNR-v1720 OPTIONAL
}
CA-ParametersNRDC-v1730 ::= SEQUENCE {
ca-ParametersNR-ForDC-v1730 CA-ParametersNR-v1730 OPTIONAL
}
CA-ParametersNRDC-v1760 ::= SEQUENCE {
ca-ParametersNR-ForDC-v1760 CA-ParametersNR-v1760
}
CA-ParametersNRDC-v1780 ::= SEQUENCE {
ca-ParametersNR-ForDC-v1780 CA-ParametersNR-v1780 OPTIONAL
}
CA-ParametersNRDC-v17b0 ::= SEQUENCE {
ca-ParametersNR-ForDC-v17b0 CA-ParametersNR-v1740 OPTIONAL
}
CA-ParametersNRDC-v1800 ::= SEQUENCE {
ca-ParametersNR-ForDC-v1800 CA-ParametersNR-v1800 OPTIONAL,
-- R1 55-6d: Capability on the number of CCs for monitoring a maximum number of BDs and non-overlapped CCEs per span for MCG and for
-- SCG when configured for NR-DC operation with Rel-16 PDCCH monitoring on all the serving cells
pdcch-BlindDetectionNRDC-r18 SEQUENCE(SIZE (1..maxNrofPdcch-BlindDetectionMixed-1-r16)) OF
PDCCH-BlindDetectionMixed1-r18 OPTIONAL
}
CA-ParametersNRDC-v1830 ::= SEQUENCE {
ca-ParametersNR-ForDC-v1830 CA-ParametersNR-v1830 OPTIONAL
}
PDCCH-BlindDetectionMixed1-r18::= SEQUENCE {
pdcch-BlindDetectionCG-UE-Mixed-r18 SEQUENCE{
pdcch-BlindDetectionMCG-UE-Mixed-r18 INTEGER (1..15),
pdcch-BlindDetectionSCG-UE-Mixed-r18 INTEGER (1..15)
}
}
-- TAG-CA-PARAMETERS-NRDC-STOP
-- ASN1STOP
– CarrierAggregationVariant
The IE CarrierAggregationVariant informs the network about supported "placement" of the SpCell in an NR cell group.
CarrierAggregationVariant information element
-- ASN1START
-- TAG-CARRIERAGGREGATIONVARIANT-START
CarrierAggregationVariant ::= SEQUENCE {
fr1fdd-FR1TDD-CA-SpCellOnFR1FDD ENUMERATED {supported} OPTIONAL,
fr1fdd-FR1TDD-CA-SpCellOnFR1TDD ENUMERATED {supported} OPTIONAL,
fr1fdd-FR2TDD-CA-SpCellOnFR1FDD ENUMERATED {supported} OPTIONAL,
fr1fdd-FR2TDD-CA-SpCellOnFR2TDD ENUMERATED {supported} OPTIONAL,
fr1tdd-FR2TDD-CA-SpCellOnFR1TDD ENUMERATED {supported} OPTIONAL,
fr1tdd-FR2TDD-CA-SpCellOnFR2TDD ENUMERATED {supported} OPTIONAL,
fr1fdd-FR1TDD-FR2TDD-CA-SpCellOnFR1FDD ENUMERATED {supported} OPTIONAL,
fr1fdd-FR1TDD-FR2TDD-CA-SpCellOnFR1TDD ENUMERATED {supported} OPTIONAL,
fr1fdd-FR1TDD-FR2TDD-CA-SpCellOnFR2TDD ENUMERATED {supported} OPTIONAL
}
-- TAG-CARRIERAGGREGATIONVARIANT-STOP
-- ASN1STOP
– CodebookParameters
The IE CodebookParameters is used to convey codebook related parameters.
CodebookParameters information element
-- ASN1START
-- TAG-CODEBOOKPARAMETERS-START
CodebookParameters ::= SEQUENCE {
type1 SEQUENCE {
singlePanel SEQUENCE {
supportedCSI-RS-ResourceList SEQUENCE (SIZE (1.. maxNrofCSI-RS-Resources)) OF SupportedCSI-RS-Resource,
modes ENUMERATED {mode1, mode1andMode2},
maxNumberCSI-RS-PerResourceSet INTEGER (1..8)
},
multiPanel SEQUENCE {
supportedCSI-RS-ResourceList SEQUENCE (SIZE (1.. maxNrofCSI-RS-Resources)) OF SupportedCSI-RS-Resource,
modes ENUMERATED {mode1, mode2, both},
nrofPanels ENUMERATED {n2, n4},
maxNumberCSI-RS-PerResourceSet INTEGER (1..8)
} OPTIONAL
},
type2 SEQUENCE {
supportedCSI-RS-ResourceList SEQUENCE (SIZE (1.. maxNrofCSI-RS-Resources)) OF SupportedCSI-RS-Resource,
parameterLx INTEGER (2..4),
amplitudeScalingType ENUMERATED {wideband, widebandAndSubband},
amplitudeSubsetRestriction ENUMERATED {supported} OPTIONAL
} OPTIONAL,
type2-PortSelection SEQUENCE {
supportedCSI-RS-ResourceList SEQUENCE (SIZE (1.. maxNrofCSI-RS-Resources)) OF SupportedCSI-RS-Resource,
parameterLx INTEGER (2..4),
amplitudeScalingType ENUMERATED {wideband, widebandAndSubband}
} OPTIONAL
}
CodebookParameters-v1610 ::= SEQUENCE {
supportedCSI-RS-ResourceListAlt-r16 SEQUENCE {
type1-SinglePanel-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-Resources)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16) OPTIONAL,
type1-MultiPanel-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-Resources)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16) OPTIONAL,
type2-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-Resources)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16) OPTIONAL,
type2-PortSelection-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-Resources)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16) OPTIONAL
} OPTIONAL
}
CodebookParametersAddition-r16 ::= SEQUENCE {
etype2-r16 SEQUENCE {
-- R1 16-3a Regular eType 2 R=1
etype2R1-r16 SEQUENCE {
supportedCSI-RS-ResourceListAdd-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF
INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
},
-- R1 16-3a-1 Regular eType 2 R=2
etype2R2-r16 SEQUENCE {
supportedCSI-RS-ResourceListAdd-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF
INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
} OPTIONAL,
-- R1 16-3a-2: Support of parameter combinations 7-8
paramComb7-8-r16 ENUMERATED {supported} OPTIONAL,
-- R1 16-3a-3: Support of rank 3,4
rank3-4-r16 ENUMERATED {supported} OPTIONAL,
-- R1 16-3a-4: CBSR with soft amplitude restriction
amplitudeSubsetRestriction-r16 ENUMERATED {supported} OPTIONAL
} OPTIONAL,
etype2-PS-r16 SEQUENCE {
-- R1 16-3b Regular eType 2 R=1 PortSelection
etype2R1-PortSelection-r16 SEQUENCE {
supportedCSI-RS-ResourceListAdd-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF
INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
},
-- R1 16-3b-1 Regular eType 2 R=2 PortSelection
etype2R2-PortSelection-r16 SEQUENCE {
supportedCSI-RS-ResourceListAdd-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF
INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
} OPTIONAL,
-- R1 16-3b-2: Support of rank 3,4
rank3-4-r16 ENUMERATED {supported} OPTIONAL
} OPTIONAL
}
CodebookComboParametersAddition-r16 ::= SEQUENCE {
-- R1 16-8 Mixed codebook types
type1SP-Type2-null-r16 SEQUENCE {
supportedCSI-RS-ResourceListAdd-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
} OPTIONAL,
type1SP-Type2PS-null-r16 SEQUENCE {
supportedCSI-RS-ResourceListAdd-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
} OPTIONAL,
type1SP-eType2R1-null-r16 SEQUENCE {
supportedCSI-RS-ResourceListAdd-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
} OPTIONAL,
type1SP-eType2R2-null-r16 SEQUENCE {
supportedCSI-RS-ResourceListAdd-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
} OPTIONAL,
type1SP-eType2R1PS-null-r16 SEQUENCE {
supportedCSI-RS-ResourceListAdd-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
} OPTIONAL,
type1SP-eType2R2PS-null-r16 SEQUENCE {
supportedCSI-RS-ResourceListAdd-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
} OPTIONAL,
type1SP-Type2-Type2PS-r16 SEQUENCE {
supportedCSI-RS-ResourceListAdd-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
} OPTIONAL,
type1MP-Type2-null-r16 SEQUENCE {
supportedCSI-RS-ResourceListAdd-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
} OPTIONAL,
type1MP-Type2PS-null-r16 SEQUENCE {
supportedCSI-RS-ResourceListAdd-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
} OPTIONAL,
type1MP-eType2R1-null-r16 SEQUENCE {
supportedCSI-RS-ResourceListAdd-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
} OPTIONAL,
type1MP-eType2R2-null-r16 SEQUENCE {
supportedCSI-RS-ResourceListAdd-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
} OPTIONAL,
type1MP-eType2R1PS-null-r16 SEQUENCE {
supportedCSI-RS-ResourceListAdd-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
} OPTIONAL,
type1MP-eType2R2PS-null-r16 SEQUENCE {
supportedCSI-RS-ResourceListAdd-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
} OPTIONAL,
type1MP-Type2-Type2PS-r16 SEQUENCE {
supportedCSI-RS-ResourceListAdd-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
} OPTIONAL
}
CodebookParametersfetype2-r17 ::= SEQUENCE {
-- R1 23-9-1 Basic Features of Further Enhanced Port-Selection Type II Codebook (FeType-II)
fetype2basic-r17 SEQUENCE (SIZE (1.. maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16),
-- R1 23-9-2 Support of M=2 and R=1 for FeType-II
fetype2R1-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r17)) OF INTEGER (0.. maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
-- R1 23-9-4 Support of R = 2 for FeType-II
fetype2R2-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r17)) OF INTEGER (0.. maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
-- R1 23-9-3 Support of rank 3, 4 for FeType-II
fetype2Rank3Rank4-r17 ENUMERATED {supported} OPTIONAL
}
CodebookComboParameterMixedType-r17 ::= SEQUENCE {
-- R1 23-9-5 Active CSI-RS resources and ports for mixed codebook types in any slot
type1SP-feType2PS-null-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
type1SP-feType2PS-M2R1-null-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
type1SP-feType2PS-M2R2-null-r1 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
type1SP-Type2-feType2-PS-M1-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
type1SP-Type2-feType2-PS-M2R1-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
type1SP-eType2R1-feType2-PS-M1-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
type1SP-eType2R1-feType2-PS-M2R1-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
type1MP-feType2PS-null-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
type1MP-feType2PS-M2R1-null-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
type1MP-feType2PS-M2R2-null-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
type1MP-Type2-feType2-PS-M1-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
type1MP-Type2-feType2-PS-M2R1-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
type1MP-eType2R1-feType2-PS-M1-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
type1MP-eType2R1-feType2-PS-M2R1-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL
}
CodebookComboParameterMultiTRP-r17::= SEQUENCE {
-- R1 23-7-1b Active CSI-RS resources and ports in the presence of multi-TRP CSI
-- {Codebook 2, Codebook 3} =(NULL, NULL}
nCJT-null-null SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT1SP-null-null SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
-- {Codebook 2, Codebook 3} = {( {"Rel 16 combinations in FG 16-8"}
nCJT-Type2-null-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT-Type2PS-null-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT-eType2R1-null-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT-eType2R2-null-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT-eType2R1PS-null-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT-eType2R2PS-null-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT-Type2-Type2PS-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT1SP-Type2-null-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT1SP-Type2PS-null-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT1SP-eType2R1-null-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT1SP-eType2R2-null-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT1SP-eType2R1PS-null-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT1SP-eType2R2PS-null-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT1SP-Type2-Type2PS-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
-- {Codebook 2, Codebook 3} = {"New Rel17 combinations in FG 23-9-5"}
nCJT-feType2PS-null-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT-feType2PS-M2R1-null-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT-feType2PS-M2R2-null-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT-Type2-feType2-PS-M1-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT-Type2-feType2-PS-M2R1-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT-eType2R1-feType2-PS-M1-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT-eType2R1-feType2-PS-M2R1-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT1SP-feType2PS-null-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT1SP-feType2PS-M2R1-null-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT1SP-feType2PS-M2R2-null-r1 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT1SP-Type2-feType2-PS-M1-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT1SP-Type2-feType2-PS-M2R1-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT1SP-eType2R1-feType2-PS-M1-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT1SP-eType2R1-feType2-PS-M2R1-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL
}
CodebookParametersAdditionPerBC-r16::= SEQUENCE {
-- R1 16-3a Regular eType 2 R=1
etype2R1-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
-- R1 16-3a-1 Regular eType 2 R=2
etype2R2-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
-- R1 16-3b Regular eType 2 R=1 PortSelection
etype2R1-PortSelection-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
-- R1 16-3b-1 Regular eType 2 R=2 PortSelection
etype2R2-PortSelection-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL
}
CodebookComboParametersAdditionPerBC-r16::= SEQUENCE {
-- R1 16-8 Mixed codebook types
type1SP-Type2-null-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
type1SP-Type2PS-null-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
type1SP-eType2R1-null-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
type1SP-eType2R2-null-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
type1SP-eType2R1PS-null-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
type1SP-eType2R2PS-null-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
type1SP-Type2-Type2PS-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
type1MP-Type2-null-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
type1MP-Type2PS-null-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
type1MP-eType2R1-null-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
type1MP-eType2R2-null-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
type1MP-eType2R1PS-null-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
type1MP-eType2R2PS-null-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
type1MP-Type2-Type2PS-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL
}
CodebookParametersfetype2PerBC-r17 ::= SEQUENCE {
-- R1 23-9-1 Basic Features of Further Enhanced Port-Selection Type II Codebook (FeType-II)
fetype2basic-r17 SEQUENCE (SIZE (1.. maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16),
-- R1 23-9-2 Support of M=2 and R=1 for FeType-II
fetype2R1-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r17)) OF INTEGER (0.. maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
-- R1 23-9-4 Support of R = 2 for FeType-II
fetype2R2-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r17)) OF INTEGER (0.. maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL
}
CodebookComboParameterMixedTypePerBC-r17 ::= SEQUENCE {
-- R1 23-9-5 Active CSI-RS resources and ports for mixed codebook types in any slot
type1SP-feType2PS-null-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
type1SP-feType2PS-M2R1-null-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
type1SP-feType2PS-M2R2-null-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
type1SP-Type2-feType2-PS-M1-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
type1SP-Type2-feType2-PS-M2R1-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
type1SP-eType2R1-feType2-PS-M1-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
type1SP-eType2R1-feType2-PS-M2R1-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
type1MP-feType2PS-null-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
type1MP-feType2PS-M2R1-null-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
type1MP-feType2PS-M2R2-null-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
type1MP-Type2-feType2-PS-M1-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
type1MP-Type2-feType2-PS-M2R1-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
type1MP-eType2R1-feType2-PS-M1-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
type1MP-eType2R1-feType2-PS-M2R1-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL
}
CodebookComboParameterMultiTRP-PerBC-r17::= SEQUENCE {
-- R1 23-7-1b Active CSI-RS resources and ports in the presence of multi-TRP CSI
-- {Codebook 2, Codebook 3} =(NULL, NULL}
nCJT-null-null SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT1SP-null-null SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
-- {Codebook 2, Codebook 3} = {( {"Rel 16 combinations in FG 16-8"}
nCJT-Type2-null-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT-Type2PS-null-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT-eType2R1-null-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT-eType2R2-null-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT-eType2R1PS-null-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT-eType2R2PS-null-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT-Type2-Type2PS-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT1SP-Type2-null-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT1SP-Type2PS-null-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT1SP-eType2R1-null-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT1SP-eType2R2-null-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT1SP-eType2R1PS-null-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT1SP-eType2R2PS-null-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT1SP-Type2-Type2PS-r16 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
-- {Codebook 2, Codebook 3} = {"New Rel17 combinations in FG 23-9-5"}
nCJT-feType2PS-null-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT-feType2PS-M2R1-null-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT-feType2PS-M2R2-null-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT-Type2-feType2-PS-M1-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT-Type2-feType2-PS-M2R1-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT-eType2R1-feType2-PS-M1-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT-eType2R1-feType2-PS-M2R1-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT1SP-feType2PS-null-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT1SP-feType2PS-M2R1-null-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT1SP-feType2PS-M2R2-null-r1 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT1SP-Type2-feType2-PS-M1-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT1SP-Type2-feType2-PS-M2R1-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT1SP-eType2R1-feType2-PS-M1-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
nCJT1SP-eType2R1-feType2-PS-M2R1-r17 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL
}
CodebookParametersetype2DopplerCSI-r18 ::= SEQUENCE {
-- R1 40-3-2-1: Support of Rel-16-based doppler CSI
eType2Doppler-r18 SEQUENCE {
supportedCSI-RS-ResourceList-r18 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER
(0..maxNrofCSI-RS-ResourcesAlt-1-r16),
valueY-P-SP-CSI-RS-r18 INTEGER (1..3),
valueY-A-CSI-RS-r18 INTEGER (1..3),
scalingfactor-r18 ENUMERATED {n1, n2, n4}
},
-- R1 40-3-2-1a: Support of Rel-16-based doppler measurement with N4>1
eType2DopplerN4-r18 SEQUENCE {
supportedCSI-RS-ReportSettingList1-r18 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF
SupportedCSI-RS-ReportSetting-r18,
supportedCSI-RS-ReportSettingList2-r18 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF
SupportedCSI-RS-ReportSetting-r18
} OPTIONAL,
-- R1 40-3-2-1a-1: DD unit size when A-CSI-RS is configured for CMR N4>1
ddUnitSize-A-CSI-RS-CMR-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-3-2-1b: Maximum number of aperiodic CSI-RS resources that can be configured in the same CSI report setting for
-- Rel-16-based doppler measurement
maxNumberAperiodicCSI-RS-Resource-r18 ENUMERATED {n4, n8, n12} OPTIONAL,
-- R1 40-3-2-2: Support R=2 for Rel-16-based doppler codebook
eType2DopplerR2-r18 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
-- R1 40-3-2-3: Support X=1 based on first and last slot of WCSI, for Rel-16-based doppler codebook
eType2DopplerX1-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-3-2-3a: Support X=2 CQI based on 2 slots for Rel-16-based doppler codebook
eType2DopplerX2-r18 ENUMERATED {supported} OPTIONAL,
--R1 40-3-2-7: support of l = (n - nCSI,ref ) for CSI reference slot for Rel-16 based doppler codebook
eType2DopplerL-N4D1-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-3-2-8: Support of L=6 for Rel-16 based doppler codebook
eType2DopplerL6-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-3-2-9: Support of rank equals 3 and 4 for Rel-16 based doppler codebook
eType2DopplerR3R4-r18 ENUMERATED {supported} OPTIONAL
}
CodebookParametersfetype2DopplerCSI-r18 ::= SEQUENCE {
-- R1 40-3-2-4: Support of Rel-17-based doppler CSI
feType2Doppler-r18 SEQUENCE {
supportedCSI-RS-ResourceList-r18 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER
(0..maxNrofCSI-RS-ResourcesAlt-1-r16),
valueY-A-CSI-RS-r18 INTEGER (1..3),
scalingfactor-r18 ENUMERATED {n1, n2, n4}
},
-- R1 40-3-2-4b: Maximum number of aperiodic CSI-RS resources that can be configured in the same CSI report setting for
-- Rel-17-based doppler CSI
maxNumberAperiodicCSI-RS-Resource-r18 ENUMERATED {n4, n8, n12} OPTIONAL,
-- R1 40-3-2-5: Support of M=2 and R=1 for Rel-17-based doppler codebook
feType2DopplerM2R1-r18 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER
(0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
-- R1 40-3-2-6: Support R=2 for Rel-17-based doppler codebook
feType2DopplerR2-r18 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
--R1 40-3-2-7a: Support of l = (n - nCSI,ref ) for CSI reference slot for Rel-17 based doppler codebook
feType2DopplerL-N4D1-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-3-2-10: Support of rank equals 3 and 4 for Rel-17 based doppler codebook
feType2DopplerR3R4-r18 ENUMERATED {supported} OPTIONAL
}
CodebookParametersetype2CJT-r18 ::= SEQUENCE {
-- R1 40-3-1-1: Basic feature for Rel-16-based CJT type-II codebook
eType2CJT-r18 SEQUENCE {
supportedCSI-RS-ResourceList-r18 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER
(0..maxNrofCSI-RS-ResourcesAlt-1-r16),
scalingfactor-r18 ENUMERATED {n1, n1dot5, n2},
maxNumberNZP-CSI-RS-MultiTRP-CJT-r18 INTEGER (2..4)
},
-- R1 40-3-1-1a: Support of mode 1 for Rel-16-based CJT type-II codebook with FD basis selection integer frequency offset
eType2CJT-FD-IO-r18 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER
(0..maxNrofCSI-RS-ResourcesAlt-1-r16) OPTIONAL,
-- R1 40-3-1-2: Support for FD basis selection fractional offset mode for Rel-16-based CJT codebook with mode1
eType2CJT-FD-FO-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-3-1-3: Support R=2 for Rel-16-based CJT codebook
eType2CJT-R2-r18 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER
(0..maxNrofCSI-RS-ResourcesAlt-1-r16) OPTIONAL,
-- R1 40-3-1-4: Support pv={1/2,1/2,1/2,1/2} and beta=1/2 for Rel-16-based CJT codebook
eType2CJT-PV-Beta-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-3-1-9: Support for 2NN1N2 >32 for Rel-16 based CJT codebook
eType2CJT-2NN1N2-r18 ENUMERATED {n64,n96,n128} OPTIONAL,
-- R1 40-3-1-12: Support of Rank 3 and 4 for Rel-16-based CJT type-II codebook
eType2CJT-Rank3Rank4-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-3-1-14: Support of Support of L=6 for Rel-16-based CJT type-II codebook
eType2CJT-L6-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-3-1-15: dynamic selection of N<=N_TRP for Rel-16-based CJT type-II codebook
eType2CJT-NN-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-3-1-17: Support for N_L>1 combinations of number of SD basis across CSI-RS resources for Rel-16-based CJT
-- type-II codebook
eType2CJT-NL-SD-r18 ENUMERATED {n2,n4} OPTIONAL,
-- R1 40-3-1-23: Unequal number of spatial basis selection configuration for multi-TRP CJT
eType2CJT-Unequal-r18 ENUMERATED {supported} OPTIONAL
}
CodebookParametersfetype2CJT-r18 ::= SEQUENCE {
-- R1 40-3-1-5: Basic feature for Rel-17-based CJT type-II codebook
feType2CJT-r18 SEQUENCE {
supportedCSI-RS-ResourceList-r18 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER
(0..maxNrofCSI-RS-ResourcesAlt-1-r16),
scalingfactor-r18 ENUMERATED {n1, n1dot5, n2},
maxNumberNZP-CSI-RS-MultiTRP-CJT-r18 INTEGER (2..4)
},
-- R1 40-3-1-5a: Support of mode 1 for Rel-17-based CJT type-II codebook with FD basis selection integer frequency offset
feType2CJT-FD-IO-r18 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER
(0..maxNrofCSI-RS-ResourcesAlt-1-r16) OPTIONAL,
-- R1 40-3-1-6: Support for FD basis selection fractional offset mode for Rel-17-based CJT codebook with mode1
feType2CJT-FD-FO-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-3-1-7: Support of M=2 and R=1 for Rel-17-based CJT codebook
feType2CJT-M2R1-r18 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER
(0..maxNrofCSI-RS-ResourcesAlt-1-r16) OPTIONAL,
-- R1 40-3-1-8: Support of R=2 for Rel-17-based CJT codebook
feType2CJT-R2-r18 SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER
(0..maxNrofCSI-RS-ResourcesAlt-1-r16) OPTIONAL,
-- R1 40-3-1-9a: Support for 2NN1N2 >32 for Rel-17 based CJT codebook
feType2CJT-2NN1N2-r18 ENUMERATED {n64,n96,n128} OPTIONAL,
-- R1 40-3-1-13: Support of Rank 3 and 4 for Rel-17-based CJT type-II codebook
feType2CJT-Rank3Rank4-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-3-1-16: dynamic selection of N<=N_TRP for Rel-17-based CJT type-II codebook
feType2CJT-NN-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-3-1-18: Support for N_L>1 combinations of number of SD basis across CSI-RS resources for Rel-17-based CJT
-- type-II codebook
feType2CJT-NL-r18 ENUMERATED {n2,n4} OPTIONAL,
-- R1 40-3-1-23a: Unequal number of port selection configuration for multi-TRP CJT
feType2CJT-Unequal-r18 ENUMERATED {supported} OPTIONAL
}
CodebookComboParametersCJT-r18::= SEQUENCE {
-- R1 40-3-1-11: Active CSI-RS resources and ports for mixed codebook types including Type-II-CJT in any slot
-- {Codebook 1} = Type I SP
cjt-Type1SP-eType2R1-null SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
cjt-Type1SP-eType2R2-null SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
cjt-Type1SP-feType2R1M1-null SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
cjt-Type1SP-feType2R1M2-null SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
cjt-Type1SP-feType2R2M2-null SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
-- {Codebook 1} = Type I MP
cjt-Type1MP-eType2R1-null SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
cjt-Type1MP-eType2R2-null SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
cjt-Type1MP-feType2R1M1-null SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
cjt-Type1MP-feType2R1M2-null SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL,
cjt-Type1MP-feType2R2M2-null SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesExt-r16)) OF INTEGER (0..maxNrofCSI-RS-ResourcesAlt-1-r16)
OPTIONAL
}
CodebookParametersHARQ-ACK-PUSCH-r18::= SEQUENCE {
-- R1 55-4a: Multiplexing Type-1 HARQ-ACK codebook in a PUSCH for PDSCH scheduled after UL grant
multiplexingType1-r18 ENUMERATED {supported} OPTIONAL,
-- R1 55-4b: Multiplexing Type-2 HARQ-ACK codebook in a PUSCH for PDSCH scheduled after UL grant
multiplexingType2-r18 ENUMERATED {supported} OPTIONAL,
-- R1 55-4c: Multiplexing Type-3 HARQ-ACK codebook in a PUSCH for PDSCH scheduled after UL grant
multiplexingType3-r18 ENUMERATED {supported} OPTIONAL,
-- R1 55-4d: Determining a different PUCCH resource to transmit HARQ-ACK for PDSCH scheduled after UL grant
pucch-DiffResource-PDSCH-r18 ENUMERATED {supported} OPTIONAL,
-- R1 55-4e: Determining different codebook size to transmit HARQ-ACK for PDSCH scheduled after UL grant
diffCB-Size-PDSCH-r18 ENUMERATED {supported} OPTIONAL
}
CodebookVariantsList-r16 ::= SEQUENCE (SIZE (1..maxNrofCSI-RS-ResourcesAlt-r16)) OF SupportedCSI-RS-Resource
SupportedCSI-RS-Resource ::= SEQUENCE {
maxNumberTxPortsPerResource ENUMERATED {p2, p4, p8, p12, p16, p24, p32},
maxNumberResourcesPerBand INTEGER (1..64),
totalNumberTxPortsPerBand INTEGER (2..256)
}
SupportedCSI-RS-ReportSetting-r18 ::= SEQUENCE {
maxN4-r18 ENUMERATED {n1, n2, n4, n8},
maxNumberTxPortsPerResource-r18 ENUMERATED {p2, p4, p8, p12, p16, p24, p32},
maxNumberResourcesPerBand-r18 INTEGER (1..64),
totalNumberTxPortsPerBand-r18 INTEGER (2..256)
}
-- TAG-CODEBOOKPARAMETERS-STOP
-- ASN1STOP
– DL-PRS-MeasurementWithRxFH-RRC-Connected
The IE DL-PRS-MeasurementWithRxFH-RRC-Connected is used to convey the capabilities supported by the UE for PRS measurement with Rx frequency hopping within a measurement gap and measurement reporting in RRC_CONNECTED for RedCap UEs.
DL-PRS-MeasurementWithRxFH-RRC-Connected information element
-- ASN1START
-- TAG-DL-PRS-MEASUREMENTWITHRXFH-RRC-CONNECTED-START
DL-PRS-MeasurementWithRxFH-RRC-Connected-r18 ::= SEQUENCE {
maximumPRS-BandwidthAcrossAllHopsFR1-r18 ENUMERATED {mhz40, mhz50, mhz80, mhz100} OPTIONAL,
maximumPRS-BandwidthAcrossAllHopsFR2-r18 ENUMERATED {mhz100, mhz200, mhz400} OPTIONAL,
maximumFH-Hops-r18 ENUMERATED {n2, n3, n4, n5, n6} OPTIONAL,
processingDuration-r18 SEQUENCE {
processingPRS-SymbolsDurationN3-r18 ENUMERATED {msDot125, msDot25, msDot5, ms1, ms2, ms4, ms6, ms8, ms12,
ms16, ms20, ms25, ms30, ms32, ms35, ms40, ms45, ms50},
processingDurationT3-r18 ENUMERATED {ms8, ms16, ms20, ms30, ms40, ms80, ms160, ms320, ms640, ms1280}
} OPTIONAL,
rf-RxRetuneTimeFR1-r18 ENUMERATED {n70, n140, n210} OPTIONAL,
rf-RxRetuneTimeFR2-r18 ENUMERATED {n35, n70, n140} OPTIONAL,
numOfOverlappingPRB-r18 ENUMERATED {n0, n1, n2, n4} OPTIONAL,
...
}
-- TAG-DL-PRS-MEASUREMENTWITHRXFH-RRC-CONNECTED-STOP
-- ASN1STOP
– ERedCapParameters
The IE ERedCapParameters is used to indicate the UE capabilities supported by eRedCap UEs.
ERedCapParameters information element
-- ASN1START
-- TAG-EREDCAPPARAMETERS-START
ERedCapParameters-r18::= SEQUENCE {
-- R1 48-1: eRedCap UE with reduced peak data rate and reduced baseband bandwidth in FR1
supportOfERedCap-r18 ENUMERATED {supported},
-- R1 48-2: eRedCap UE with reduced peak data rate without reduced baseband bandwidth in FR1
eRedCapNotReducedBB-BW-r18 ENUMERATED {supported} OPTIONAL,
eRedCapIgnoreCapabilityFiltering-r18 ENUMERATED {supported} OPTIONAL
}
-- TAG-EREDCAPPARAMETERS-STOP
-- ASN1STOP
– FeatureSetCombination
The IE FeatureSetCombination is a two-dimensional matrix of FeatureSet entries.
Each FeatureSetsPerBand contains a list of feature sets applicable to the carrier(s) of one band entry of the associated band combination. Across the associated bands, the UE shall support the combination of FeatureSets at the same position in the FeatureSetsPerBand. All FeatureSetsPerBand in one FeatureSetCombination must have the same number of entries.
The number of FeatureSetsPerBand in the FeatureSetCombination must be equal to the number of band entries in an associated band combination. The first FeatureSetPerBand applies to the first band entry of the band combination, and so on.
Each FeatureSet contains either a pair of NR or E-UTRA feature set IDs for UL and DL.
In case of NR, the actual feature sets for UL and DL are defined in the FeatureSets IE and referred to from here by their ID, i.e., their position in the featureSetsUplink / featureSetsDownlink list in the FeatureSet IE.
In case of E-UTRA, the feature sets referred to from this list are defined in TS 36.331 [10] and conveyed as part of the UE-EUTRA-Capability container.
The FeatureSetUplink and FeatureSetDownlink referred to from the FeatureSet comprise, among other information, a set of FeatureSetUplinkPerCC-Ids and FeatureSetDownlinkPerCC-Ids. The number of these per-CC IDs determines the number of carriers that the UE is able to aggregate contiguously in frequency domain in the corresponding band. The number of carriers supported by the UE is also restricted by the bandwidth class indicated in the associated BandCombination, if present.
In feature set combinations the UE shall exclude entries with same or lower capabilities, since the network may anyway assume that the UE supports those.
NOTE 1: The UE may advertise fallback band-combinations in which it supports additional functionality explicitly in two ways: Either by setting FeatureSet IDs to zero (inter-band and intra-band non-contiguous fallback) and by reducing the number of FeatureSet-PerCC Ids in a Feature Set (intra-band contiguous fallback). Or by separate BandCombination entries with associated FeatureSetCombinations.
NOTE 2: The UE may advertise a FeatureSetCombination containing only fallback band combinations. That means, in a FeatureSetCombination, each group of FeatureSets across the bands may contain at least one pair of FeatureSetUplinkId and FeatureSetDownlinkId which is set to 0/0.
NOTE 3: The Network configures serving cell(s) and BWP(s) configuration to comply with capabilities derived from the combination of FeatureSets at the same position in the FeatureSetsPerBand, regardless of activated/deactivated serving cell(s) and BWP(s).
FeatureSetCombination information element
-- ASN1START
-- TAG-FEATURESETCOMBINATION-START
FeatureSetCombination ::= SEQUENCE (SIZE (1..maxSimultaneousBands)) OF FeatureSetsPerBand
FeatureSetsPerBand ::= SEQUENCE (SIZE (1..maxFeatureSetsPerBand)) OF FeatureSet
FeatureSet ::= CHOICE {
eutra SEQUENCE {
downlinkSetEUTRA FeatureSetEUTRA-DownlinkId,
uplinkSetEUTRA FeatureSetEUTRA-UplinkId
},
nr SEQUENCE {
downlinkSetNR FeatureSetDownlinkId,
uplinkSetNR FeatureSetUplinkId
}
}
-- TAG-FEATURESETCOMBINATION-STOP
-- ASN1STOP
– FeatureSetCombinationId
The IE FeatureSetCombinationId identifies a FeatureSetCombination. The FeatureSetCombinationId of a FeatureSetCombination is the position of the FeatureSetCombination in the featureSetCombinations list (in UE-NR-Capability or UE-MRDC-Capability). The FeatureSetCombinationId = 0 refers to the first entry in the featureSetCombinations list (in UE-NR-Capability or UE-MRDC-Capability).
NOTE: The FeatureSetCombinationId = 1024 is not used due to the maximum entry number of featureSetCombinations.
FeatureSetCombinationId information element
-- ASN1START
-- TAG-FEATURESETCOMBINATIONID-START
FeatureSetCombinationId ::= INTEGER (0.. maxFeatureSetCombinations)
-- TAG-FEATURESETCOMBINATIONID-STOP
-- ASN1STOP
– FeatureSetDownlink
The IE FeatureSetDownlink indicates a set of features that the UE supports on the carriers corresponding to one band entry in a band combination.
FeatureSetDownlink information element
-- ASN1START
-- TAG-FEATURESETDOWNLINK-START
FeatureSetDownlink ::= SEQUENCE {
featureSetListPerDownlinkCC SEQUENCE (SIZE (1..maxNrofServingCells)) OF FeatureSetDownlinkPerCC-Id,
intraBandFreqSeparationDL FreqSeparationClass OPTIONAL,
scalingFactor ENUMERATED {f0p4, f0p75, f0p8} OPTIONAL,
dummy8 ENUMERATED {supported} OPTIONAL,
scellWithoutSSB ENUMERATED {supported} OPTIONAL,
csi-RS-MeasSCellWithoutSSB ENUMERATED {supported} OPTIONAL,
dummy1 ENUMERATED {supported} OPTIONAL,
type1-3-CSS ENUMERATED {supported} OPTIONAL,
pdcch-MonitoringAnyOccasions ENUMERATED {withoutDCI-Gap, withDCI-Gap} OPTIONAL,
dummy2 ENUMERATED {supported} OPTIONAL,
ue-SpecificUL-DL-Assignment ENUMERATED {supported} OPTIONAL,
searchSpaceSharingCA-DL ENUMERATED {supported} OPTIONAL,
timeDurationForQCL SEQUENCE {
scs-60kHz ENUMERATED {s7, s14, s28} OPTIONAL,
scs-120kHz ENUMERATED {s14, s28} OPTIONAL
} OPTIONAL,
pdsch-ProcessingType1-DifferentTB-PerSlot SEQUENCE {
scs-15kHz ENUMERATED {upto2, upto4, upto7} OPTIONAL,
scs-30kHz ENUMERATED {upto2, upto4, upto7} OPTIONAL,
scs-60kHz ENUMERATED {upto2, upto4, upto7} OPTIONAL,
scs-120kHz ENUMERATED {upto2, upto4, upto7} OPTIONAL
} OPTIONAL,
dummy3 DummyA OPTIONAL,
dummy4 SEQUENCE (SIZE (1.. maxNrofCodebooks)) OF DummyB OPTIONAL,
dummy5 SEQUENCE (SIZE (1.. maxNrofCodebooks)) OF DummyC OPTIONAL,
dummy6 SEQUENCE (SIZE (1.. maxNrofCodebooks)) OF DummyD OPTIONAL,
dummy7 SEQUENCE (SIZE (1.. maxNrofCodebooks)) OF DummyE OPTIONAL
}
FeatureSetDownlink-v1540 ::= SEQUENCE {
oneFL-DMRS-TwoAdditionalDMRS-DL ENUMERATED {supported} OPTIONAL,
additionalDMRS-DL-Alt ENUMERATED {supported} OPTIONAL,
twoFL-DMRS-TwoAdditionalDMRS-DL ENUMERATED {supported} OPTIONAL,
oneFL-DMRS-ThreeAdditionalDMRS-DL ENUMERATED {supported} OPTIONAL,
pdcch-MonitoringAnyOccasionsWithSpanGap SEQUENCE {
scs-15kHz ENUMERATED {set1, set2, set3} OPTIONAL,
scs-30kHz ENUMERATED {set1, set2, set3} OPTIONAL,
scs-60kHz ENUMERATED {set1, set2, set3} OPTIONAL,
scs-120kHz ENUMERATED {set1, set2, set3} OPTIONAL
} OPTIONAL,
pdsch-SeparationWithGap ENUMERATED {supported} OPTIONAL,
pdsch-ProcessingType2 SEQUENCE {
scs-15kHz ProcessingParameters OPTIONAL,
scs-30kHz ProcessingParameters OPTIONAL,
scs-60kHz ProcessingParameters OPTIONAL
} OPTIONAL,
pdsch-ProcessingType2-Limited SEQUENCE {
differentTB-PerSlot-SCS-30kHz ENUMERATED {upto1, upto2, upto4, upto7}
} OPTIONAL,
dl-MCS-TableAlt-DynamicIndication ENUMERATED {supported} OPTIONAL
}
FeatureSetDownlink-v15a0 ::= SEQUENCE {
supportedSRS-Resources SRS-Resources OPTIONAL
}
FeatureSetDownlink-v1610 ::= SEQUENCE {
-- R1 22-4e/4f/4g/4h: CBG based reception for DL with unicast PDSCH(s) per slot per CC with UE processing time Capability 1
cbgPDSCH-ProcessingType1-DifferentTB-PerSlot-r16 SEQUENCE {
scs-15kHz-r16 ENUMERATED {one, upto2, upto4, upto7} OPTIONAL,
scs-30kHz-r16 ENUMERATED {one, upto2, upto4, upto7} OPTIONAL,
scs-60kHz-r16 ENUMERATED {one, upto2, upto4, upto7} OPTIONAL,
scs-120kHz-r16 ENUMERATED {one, upto2, upto4, upto7} OPTIONAL
} OPTIONAL,
-- R1 22-3e/3f/3g/3h: CBG based reception for DL with unicast PDSCH(s) per slot per CC with UE processing time Capability 2
cbgPDSCH-ProcessingType2-DifferentTB-PerSlot-r16 SEQUENCE {
scs-15kHz-r16 ENUMERATED {one, upto2, upto4, upto7} OPTIONAL,
scs-30kHz-r16 ENUMERATED {one, upto2, upto4, upto7} OPTIONAL,
scs-60kHz-r16 ENUMERATED {one, upto2, upto4, upto7} OPTIONAL,
scs-120kHz-r16 ENUMERATED {one, upto2, upto4, upto7} OPTIONAL
} OPTIONAL,
intraFreqDAPS-r16 SEQUENCE {
intraFreqDiffSCS-DAPS-r16 ENUMERATED {supported} OPTIONAL,
intraFreqAsyncDAPS-r16 ENUMERATED {supported} OPTIONAL
} OPTIONAL,
intraBandFreqSeparationDL-v1620 FreqSeparationClassDL-v1620 OPTIONAL,
intraBandFreqSeparationDL-Only-r16 FreqSeparationClassDL-Only-r16 OPTIONAL,
-- R1 11-2: Rel-16 PDCCH monitoring capability
pdcch-Monitoring-r16 SEQUENCE {
pdsch-ProcessingType1-r16 SEQUENCE {
scs-15kHz-r16 PDCCH-MonitoringOccasions-r16 OPTIONAL,
scs-30kHz-r16 PDCCH-MonitoringOccasions-r16 OPTIONAL
} OPTIONAL,
pdsch-ProcessingType2-r16 SEQUENCE {
scs-15kHz-r16 PDCCH-MonitoringOccasions-r16 OPTIONAL,
scs-30kHz-r16 PDCCH-MonitoringOccasions-r16 OPTIONAL
} OPTIONAL
} OPTIONAL,
-- R1 11-2b: Mix of Rel. 16 PDCCH monitoring capability and Rel. 15 PDCCH monitoring capability on different carriers
pdcch-MonitoringMixed-r16 ENUMERATED {supported} OPTIONAL,
-- R1 18-5c: Processing up to X unicast DCI scheduling for DL per scheduled CC
crossCarrierSchedulingProcessing-DiffSCS-r16 SEQUENCE {
scs-15kHz-120kHz-r16 ENUMERATED {n1,n2,n4} OPTIONAL,
scs-15kHz-60kHz-r16 ENUMERATED {n1,n2,n4} OPTIONAL,
scs-30kHz-120kHz-r16 ENUMERATED {n1,n2,n4} OPTIONAL,
scs-15kHz-30kHz-r16 ENUMERATED {n2} OPTIONAL,
scs-30kHz-60kHz-r16 ENUMERATED {n2} OPTIONAL,
scs-60kHz-120kHz-r16 ENUMERATED {n2} OPTIONAL
} OPTIONAL,
-- R1 16-2b-1: Support of single-DCI based SDM scheme
singleDCI-SDM-scheme-r16 ENUMERATED {supported} OPTIONAL
}
FeatureSetDownlink-v1700 ::= SEQUENCE {
-- R1 36-2: Scaling factor to be applied to 1024QAM for FR1
scalingFactor-1024QAM-FR1-r17 ENUMERATED {f0p4, f0p75, f0p8} OPTIONAL,
-- R1 24 feature for existing UE cap to include new SCS
timeDurationForQCL-v1710 SEQUENCE {
scs-480kHz ENUMERATED {s56, s112} OPTIONAL,
scs-960kHz ENUMERATED {s112, s224} OPTIONAL
} OPTIONAL,
-- R1 23-6-1 SFN scheme A (scheme 1) for PDSCH and PDCCH
sfn-SchemeA-r17 ENUMERATED {supported} OPTIONAL,
-- R1 23-6-1-1 SFN scheme A (scheme 1) for PDCCH only
sfn-SchemeA-PDCCH-only-r17 ENUMERATED {supported} OPTIONAL,
-- R1 23-6-1a Dynamic switching - scheme A
sfn-SchemeA-DynamicSwitching-r17 ENUMERATED {supported} OPTIONAL,
-- R1 23-6-1b SFN scheme A (scheme 1) for PDSCH only
sfn-SchemeA-PDSCH-only-r17 ENUMERATED {supported} OPTIONAL,
-- R1 23-6-2 SFN scheme B (TRP based pre-compensation) for PDSCH and PDCCH
sfn-SchemeB-r17 ENUMERATED {supported} OPTIONAL,
-- R1 23-6-2a Dynamic switching - scheme B
sfn-SchemeB-DynamicSwitching-r17 ENUMERATED {supported} OPTIONAL,
-- R1 23-6-2b SFN scheme B (TRP based pre-compensation) for PDSCH only
sfn-SchemeB-PDSCH-only-r17 ENUMERATED {supported} OPTIONAL,
-- R1 23-2-1d PDCCH repetition for Case 2 PDCCH monitoring with a span gap
mTRP-PDCCH-Case2-1SpanGap-r17 SEQUENCE {
scs-15kHz-r17 PDCCH-RepetitionParameters-r17 OPTIONAL,
scs-30kHz-r17 PDCCH-RepetitionParameters-r17 OPTIONAL,
scs-60kHz-r17 PDCCH-RepetitionParameters-r17 OPTIONAL,
scs-120kHz-r17 PDCCH-RepetitionParameters-r17 OPTIONAL
} OPTIONAL,
-- R1 23-2-1e PDCCH repetition for Rel-16 PDCCH monitoring
mTRP-PDCCH-legacyMonitoring-r17 SEQUENCE {
scs-15kHz-r17 PDCCH-RepetitionParameters-r17 OPTIONAL,
scs-30kHz-r17 PDCCH-RepetitionParameters-r17 OPTIONAL
} OPTIONAL,
-- R1 23-2-4 Simultaneous configuration of PDCCH repetition and multi-DCI based multi-TRP
mTRP-PDCCH-multiDCI-multiTRP-r17 ENUMERATED {supported} OPTIONAL,
-- R1 33-2: Dynamic scheduling for multicast for PCell
dynamicMulticastPCell-r17 ENUMERATED {supported} OPTIONAL,
-- R1 23-2-1 PDCCH repetition
mTRP-PDCCH-Repetition-r17 SEQUENCE {
numBD-twoPDCCH-r17 INTEGER (2..3),
maxNumOverlaps-r17 ENUMERATED {n1,n2,n3,n5,n10,n20,n40}
} OPTIONAL
}
FeatureSetDownlink-v1720 ::= SEQUENCE {
-- R1 25-19: RTT-based Propagation delay compensation based on CSI-RS for tracking and SRS
rtt-BasedPDC-CSI-RS-ForTracking-r17 ENUMERATED {supported} OPTIONAL,
-- R1 25-19a: RTT-based Propagation delay compensation based on DL PRS for RTT-based PDC and SRS
rtt-BasedPDC-PRS-r17 SEQUENCE {
maxNumberPRS-Resource-r17 ENUMERATED {n1, n2, n4, n8, n16, n32, n64},
maxNumberPRS-ResourceProcessedPerSlot-r17 SEQUENCE {
scs-15kHz-r17 ENUMERATED {n1, n2, n4, n6, n8, n12, n16, n24, n32, n48, n64} OPTIONAL,
scs-30kHz-r17 ENUMERATED {n1, n2, n4, n6, n8, n12, n16, n24, n32, n48, n64} OPTIONAL,
scs-60kHz-r17 ENUMERATED {n1, n2, n4, n6, n8, n12, n16, n24, n32, n48, n64} OPTIONAL,
scs-120kHz-r17 ENUMERATED {n1, n2, n4, n6, n8, n12, n16, n24, n32, n48, n64} OPTIONAL
}
} OPTIONAL,
-- R1 33-5-1: SPS group-common PDSCH for multicast on PCell
sps-Multicast-r17 ENUMERATED {supported} OPTIONAL
}
FeatureSetDownlink-v1730 ::= SEQUENCE {
-- R1 25-19b: Support of PRS as spatial relation RS for SRS
prs-AsSpatialRelationRS-For-SRS-r17 ENUMERATED {supported} OPTIONAL
}
FeatureSetDownlink-v1800 ::= SEQUENCE {
-- R1 40-1-14a: Dynamic switching - scheme A
dynamicSwitchingA-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-1-14b: Dynamic switching - scheme B
dynamicSwitchingB-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-3-2-11: Aperiodic CSI report timing relaxation for doppler codebook based on Type-II codebook
aperiodicCSI-TimeRelaxation-r18 SEQUENCE {
valueW-r18 SEQUENCE{
scs-15kHz ENUMERATED {value1, value2} OPTIONAL,
scs-30kHz ENUMERATED {value1, value2} OPTIONAL,
scs-60kHz ENUMERATED {value1, value2} OPTIONAL,
scs-120kHz ENUMERATED {value1, value2} OPTIONAL
},
timeRelaxation-r18 ENUMERATED {cap1, cap2}
} OPTIONAL,
-- R1 40-4-1: Basic feature of Rel.18 enhanced DMRS ports for PDSCH for scheduling of mapping type A
pdsch-TypeA-DMRS-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-4-1a: Basic feature of Rel.18 enhanced DMRS ports for PDSCH for scheduling of mapping type B
pdsch-TypeB-DMRS-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-4-1b: 1 symbol FL DMRS and 2 additional DMRS symbols for more than one port for Rel.18 enhanced DMRS ports for PDSCH
pdsch-1SymbolFL-DMRS-Addition2Symbol-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-4-1c: Alternative additional DMRS position for co-existence with LTE CRS for Rel.18 enhanced DMRS ports for PDSCH
pdsch-AlternativeDMRS-Coexistence-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-4-1d: 2 symbols FL-DMRS for Rel.18 enhanced DMRS ports for PDSCH
pdsch-2SymbolFL-DMRS-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-4-1e: 2-symbol FL DMRS + one additional 2-symbols DMRS for Rel.18 enhanced DMRS ports for PDSCH
pdsch-2SymbolFL-DMRS-Addition2Symbol-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-4-1f: 1 symbol FL DMRS and 3 additional DMRS symbols for Rel.18 enhanced DMRS ports for PDSCH
pdsch-1SymbolFL-DMRS-Addition3Symbol-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-4-1g: DMRS type for Rel.18 enhanced DMRS ports for PDSCH
pdsch-DMRS-Type-r18 ENUMERATED {etype1, etype1And2} OPTIONAL,
-- R1 40-4-1h: 1 port DL PTRS for Rel.18 enhanced DMRS ports for PDSCH with rank 1-8
pdsch-1PortDL-PTRS-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-4-1i: 2 port DL PTRS for Rel.18 enhanced DMRS ports for PDSCH with rank 1-8
pdsch-2PortDL-PTRS-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-4-1j: Support 1 symbol FL DMRS and 2 additional DMRS symbols for at least one port for scheduling of mapping type A
mappingTypeA-1SymbolFL-DMRS-Addition2Symbol-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-4-2: Capability on the maximum number of configured DMRS types for PDSCH across all DL DCI formats per cell
maxNumberDMRS-AcrossAllDL-DCI-r18 INTEGER (2..4) OPTIONAL,
-- R1 40-4-4: Reception of PDSCH without the scheduling restriction for Rel.18 eType1 DMRS ports
pdsch-ReceptionWithoutSchedulingRestriction-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-4-4a: Reception of PDSCH without the scheduling restriction for Rel.18 eType1 DMRS ports for PDSCH with fdmSchemeA
pdsch-ReceptionSchemeA-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-4-4b: Reception of PDSCH without the scheduling restriction for Rel.18 eType1 DMRS ports for PDSCH with fdmSchemeB
pdsch-ReceptionSchemeB-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-4-5: Rel-18 DL DMRS with single DCI based M-TRP
dmrs-MultiTRP-SingleDCI-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-4-5a: Additional row(s) for antenna ports (0,2,3) for Rel.18 DL DMRS ports for single-DCI based M-TRP
dmrs-MultiTRP-AdditionRows-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-4-7: Rel-18 DL DMRS with M-DCI based M-TRP
dmrs-MultiTRP-MultiDCI-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-4-12: Support of Rel-18 DMRS and PDSCH processing capability 2 simultaneously
simulDMRS-PDSCH-r18 SEQUENCE {
scs-15kHz-r18 INTEGER (0..4) OPTIONAL,
scs-30kHz-r18 INTEGER (0..5) OPTIONAL,
scs-60kHz-r18 INTEGER (0..7) OPTIONAL
} OPTIONAL,
-- R1 53-1: Support RLM/BM/BFD and gapless L3 intra-frequency measurements based on CD-SSB outside active BWP without interruptions
bwpOperationMeasWithoutInterrupt-r18 ENUMERATED {supported} OPTIONAL,
-- R1 55-6: (2, 2) span-based PDCCH monitoring with additional restriction(s)
pdcch-MonitoringSpan2-2-r18 SEQUENCE{
pdsch-ProcessingType1-r18 SEQUENCE{
scs-15kHz-r18 ENUMERATED {supported} OPTIONAL,
scs-30kHz-r18 ENUMERATED {supported} OPTIONAL
},
pdsch-ProcessingType2-r18 SEQUENCE{
scs-15kHz-r18 ENUMERATED {supported} OPTIONAL,
scs-30kHz-r18 ENUMERATED {supported} OPTIONAL
}
} OPTIONAL,
-- R1 55-6b: Mix of Rel-16 PDCCH monitoring capability and Rel. 15 PDCCH monitoring capability on different carriers
pdcch-MonitoringMixed-r18 ENUMERATED {supported} OPTIONAL,
-- R1 55-6h: PDCCH repetition for Rel-16 PDCCH monitoring
mTRP-PDCCH-legacyMonitoring-r18 SEQUENCE {
scs-15kHz-r18 PDCCH-RepetitionParameters-r17 OPTIONAL,
scs-30kHz-r18 PDCCH-RepetitionParameters-r17 OPTIONAL
} OPTIONAL,
-- R4 42-1: Support of SCell without SS/PBCH block for inter-band CA
scellWithoutSSB-InterBandCA-r18 CHOICE {
supportOfSingleGroup ENUMERATED {referenceBand, scellWithoutSSB, both},
supportOfMultipleGroups ENUMERATED {referenceBand1, scellWithoutSSB1, referenceBand2, scellWithoutSSB2}
} OPTIONAL,
dummy SEQUENCE (SIZE (1..maxBandsMRDC)) OF Dummy-PDCCH-RACH-DL-Info-r18 OPTIONAL
}
FeatureSetDownlink-v1830 ::= SEQUENCE {
-- R4 39-4: Interruption on DL slot(s) due to PDCCH- ordered RACH transmission
pdcch-RACH-AffectedBandsList-r18 SEQUENCE (SIZE (1..maxBandsMRDC)) OF ENUMERATED {noInterruption, interruption} OPTIONAL,
-- R4 39-4a: Interruption due to RF retuning for PDCCH- ordered RACH
pdcch-RACH-SwitchingTimeList-r18 SEQUENCE (SIZE (1..maxBandsMRDC)) OF ENUMERATED {ms0, ms0dot25, ms0dot5, ms1, ms2, notSupported} OPTIONAL,
-- R4 39-5: the RF/BB preparation time for PDCCH ordered RACH of which the resources are not fully contained
-- in any of UE's configured UL BWP(s) of active serving cells
pdcch-RACH-PrepTimeList-r18 SEQUENCE (SIZE (1..maxBandsMRDC)) OF ENUMERATED {ms1, ms3, ms5, ms10, notSupported} OPTIONAL
}
PDCCH-MonitoringOccasions-r16 ::= SEQUENCE {
period7span3-r16 ENUMERATED {supported} OPTIONAL,
period4span3-r16 ENUMERATED {supported} OPTIONAL,
period2span2-r16 ENUMERATED {supported} OPTIONAL
}
PDCCH-RepetitionParameters-r17 ::= SEQUENCE {
supportedMode-r17 ENUMERATED {intra-span, inter-span, both},
limitX-PerCC-r17 ENUMERATED {n4, n8, n16, n32, n44, n64, nolimit} OPTIONAL,
limitX-AcrossCC-r17 ENUMERATED {n4, n8, n16, n32, n44, n64, n128, n256, n512, nolimit} OPTIONAL
}
DummyA ::= SEQUENCE {
maxNumberNZP-CSI-RS-PerCC INTEGER (1..32),
maxNumberPortsAcrossNZP-CSI-RS-PerCC ENUMERATED {p2, p4, p8, p12, p16, p24, p32, p40, p48, p56, p64, p72, p80,
p88, p96, p104, p112, p120, p128, p136, p144, p152, p160, p168,
p176, p184, p192, p200, p208, p216, p224, p232, p240, p248, p256},
maxNumberCS-IM-PerCC ENUMERATED {n1, n2, n4, n8, n16, n32},
maxNumberSimultaneousCSI-RS-ActBWP-AllCC ENUMERATED {n5, n6, n7, n8, n9, n10, n12, n14, n16, n18, n20, n22, n24, n26,
n28, n30, n32, n34, n36, n38, n40, n42, n44, n46, n48, n50, n52,
n54, n56, n58, n60, n62, n64},
totalNumberPortsSimultaneousCSI-RS-ActBWP-AllCC ENUMERATED {p8, p12, p16, p24, p32, p40, p48, p56, p64, p72, p80,
p88, p96, p104, p112, p120, p128, p136, p144, p152, p160, p168,
p176, p184, p192, p200, p208, p216, p224, p232, p240, p248, p256}
}
DummyB ::= SEQUENCE {
maxNumberTxPortsPerResource ENUMERATED {p2, p4, p8, p12, p16, p24, p32},
maxNumberResources INTEGER (1..64),
totalNumberTxPorts INTEGER (2..256),
supportedCodebookMode ENUMERATED {mode1, mode1AndMode2},
maxNumberCSI-RS-PerResourceSet INTEGER (1..8)
}
DummyC ::= SEQUENCE {
maxNumberTxPortsPerResource ENUMERATED {p8, p16, p32},
maxNumberResources INTEGER (1..64),
totalNumberTxPorts INTEGER (2..256),
supportedCodebookMode ENUMERATED {mode1, mode2, both},
supportedNumberPanels ENUMERATED {n2, n4},
maxNumberCSI-RS-PerResourceSet INTEGER (1..8)
}
DummyD ::= SEQUENCE {
maxNumberTxPortsPerResource ENUMERATED {p4, p8, p12, p16, p24, p32},
maxNumberResources INTEGER (1..64),
totalNumberTxPorts INTEGER (2..256),
parameterLx INTEGER (2..4),
amplitudeScalingType ENUMERATED {wideband, widebandAndSubband},
amplitudeSubsetRestriction ENUMERATED {supported} OPTIONAL,
maxNumberCSI-RS-PerResourceSet INTEGER (1..8)
}
DummyE ::= SEQUENCE {
maxNumberTxPortsPerResource ENUMERATED {p4, p8, p12, p16, p24, p32},
maxNumberResources INTEGER (1..64),
totalNumberTxPorts INTEGER (2..256),
parameterLx INTEGER (2..4),
amplitudeScalingType ENUMERATED {wideband, widebandAndSubband},
maxNumberCSI-RS-PerResourceSet INTEGER (1..8)
}
Dummy-PDCCH-RACH-DL-Info-r18 ::= CHOICE {
notSupported NULL,
supported SEQUENCE {
-- R4 39-4: Interruption on DL slot(s) due to PDCCH- ordered RACH transmission
pdcch-RACH-AffectedBands-r18 ENUMERATED {noIntrruption, interruption},
-- R4 39-4a: Interruption on DL slot(s) due to PDCCH- ordered RACH transmission
pdcch-RACH-SwitchingTimeList-r18 ENUMERATED {ms0, ms0dot25, ms0dot5 , ms1, ms2} OPTIONAL,
-- R4 39-5: the RF/BB preparation time for PDCCH ordered RACH of which the resources are not fully contained
-- in any of UE's configured UL BWP(s) of active serving cells
pdcch-RACH-PrepTime-r18 ENUMERATED {ms1, ms3, ms5, ms10} OPTIONAL
}
}
-- TAG-FEATURESETDOWNLINK-STOP
-- ASN1STOP
– FeatureSetDownlinkId
The IE FeatureSetDownlinkId identifies a downlink feature set. The FeatureSetDownlinkId of a FeatureSetDownlink is the index position of the FeatureSetDownlink in the featureSetsDownlink list in the FeatureSets IE. The first element in that list is referred to by FeatureSetDownlinkId = 1. The FeatureSetDownlinkId=0 is not used by an actual FeatureSetDownlink but means that the UE does not support a carrier in this band of a band combination.
FeatureSetDownlinkId information element
-- ASN1START
-- TAG-FEATURESETDOWNLINKID-START
FeatureSetDownlinkId ::= INTEGER (0..maxDownlinkFeatureSets)
-- TAG-FEATURESETDOWNLINKID-STOP
-- ASN1STOP
– FeatureSetDownlinkPerCC
The IE FeatureSetDownlinkPerCC indicates a set of features that the UE supports on the corresponding carrier of one band entry of a band combination.
FeatureSetDownlinkPerCC information element
-- ASN1START
-- TAG-FEATURESETDOWNLINKPERCC-START
FeatureSetDownlinkPerCC ::= SEQUENCE {
supportedSubcarrierSpacingDL SubcarrierSpacing,
supportedBandwidthDL SupportedBandwidth,
channelBW-90mhz ENUMERATED {supported} OPTIONAL,
maxNumberMIMO-LayersPDSCH MIMO-LayersDL OPTIONAL,
supportedModulationOrderDL ModulationOrder OPTIONAL
}
FeatureSetDownlinkPerCC-v1620 ::= SEQUENCE {
-- R1 16-2a: Mulit-DCI based multi-TRP
multiDCI-MultiTRP-r16 MultiDCI-MultiTRP-r16 OPTIONAL,
-- R1 16-2b-3: Support of single-DCI based FDMSchemeB
supportFDM-SchemeB-r16 ENUMERATED {supported} OPTIONAL
}
FeatureSetDownlinkPerCC-v1700 ::= SEQUENCE {
supportedMinBandwidthDL-r17 SupportedBandwidth-v1700 OPTIONAL,
broadcastSCell-r17 ENUMERATED {supported} OPTIONAL,
-- R1 33-2g: MIMO layers for multicast PDSCH
maxNumberMIMO-LayersMulticastPDSCH-r17 ENUMERATED {n2, n4, n8} OPTIONAL,
-- R1 33-2h: Dynamic scheduling for multicast for SCell
dynamicMulticastSCell-r17 ENUMERATED {supported} OPTIONAL,
supportedBandwidthDL-v1710 SupportedBandwidth-v1700 OPTIONAL,
-- R4 24-1/24-2/24-3/24-4/24-5
supportedCRS-InterfMitigation-r17 CRS-InterfMitigation-r17 OPTIONAL
}
FeatureSetDownlinkPerCC-v1720 ::= SEQUENCE {
-- R1 33-2j: Supported maximum modulation order used for maximum data rate calculation for multicast PDSCH
maxModulationOrderForMulticastDataRateCalculation-r17 ENUMERATED {qam64, qam256, qam1024} OPTIONAL,
-- R1 33-1-2: FDM-ed unicast PDSCH and group-common PDSCH for broadcast
fdm-BroadcastUnicast-r17 ENUMERATED {supported} OPTIONAL,
-- R1 33-3-2: FDM-ed unicast PDSCH and one group-common PDSCH for multicast
fdm-MulticastUnicast-r17 ENUMERATED {supported} OPTIONAL
}
FeatureSetDownlinkPerCC-v1730 ::= SEQUENCE {
-- R1 33-3-3: Intra-slot TDM-ed unicast PDSCH and group-common PDSCH
intraSlotTDM-UnicastGroupCommonPDSCH-r17 ENUMERATED {yes, no} OPTIONAL,
-- R1 33-5-3: One SPS group-common PDSCH configuration for multicast for SCell
sps-MulticastSCell-r17 ENUMERATED {supported} OPTIONAL,
-- R1 33-5-4: Up to 8 SPS group-common PDSCH configurations per CFR for multicast for SCell
sps-MulticastSCellMultiConfig-r17 INTEGER (1..8) OPTIONAL,
-- R1 33-1-1: Dynamic slot-level repetition for broadcast MTCH
dci-BroadcastWith16Repetitions-r17 ENUMERATED {supported} OPTIONAL
}
FeatureSetDownlinkPerCC-v1780 ::= SEQUENCE {
supportedBandwidthDL-v1780 SupportedBandwidth-v1700 OPTIONAL
}
FeatureSetDownlinkPerCC-v1800 ::= SEQUENCE {
-- R1 40-2-1: Basic feature for multi-DCI based intra-cell Multi-TRP operation with two TA enhancement
multiDCI-IntraCellMultiTRP-TwoTA-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-2-2: Basic feature for multi-DCI based inter-cell Multi-TRP operation with two TA enhancement
multiDCI-InterCellMultiTRP-TwoTA-r18 INTEGER (1..2) OPTIONAL,
-- R1 40-2-6: Rx timing difference larger than CP length
rxTimingDiff-r18 ENUMERATED {supported} OPTIONAL,
-- R1 55-7: Two QCL TypeD for CORESET monitoring in multi-DCI based multi-TRP
multiDCI-MultiTRP-CORESET-Monitoring-r18 ENUMERATED {supported} OPTIONAL,
broadcastNonServingCell-r18 ENUMERATED {supported} OPTIONAL,
-- R4 30-1: Supports scheduling restriction relaxation and measurement restriction relaxation
schedulingMeasurementRelaxation-r18 ENUMERATED {supported} OPTIONAL
}
FeatureSetDownlinkPerCC-v1840 ::= SEQUENCE {
supportedBandwidthDL-v1840 SupportedBandwidth-v1840 OPTIONAL,
supportedMinBandwidthDL-v1840 SupportedBandwidth-v1840 OPTIONAL
}
MultiDCI-MultiTRP-r16 ::= SEQUENCE {
maxNumberCORESET-r16 ENUMERATED {n2, n3, n4, n5},
maxNumberCORESETPerPoolIndex-r16 INTEGER (1..3),
maxNumberUnicastPDSCH-PerPool-r16 ENUMERATED {n1, n2, n3, n4, n7}
}
CRS-InterfMitigation-r17 ::= SEQUENCE {
-- R4 24-1 CRS-IM (Interference Mitigation) in DSS scenario
crs-IM-DSS-15kHzSCS-r17 ENUMERATED {supported} OPTIONAL,
-- R4 24-2 CRS-IM in non-DSS and 15 kHz NR SCS scenario, without the assistance of network signaling on LTE channel bandwidth
crs-IM-nonDSS-15kHzSCS-r17 ENUMERATED {supported} OPTIONAL,
-- R4 24-3 CRS-IM in non-DSS and 15 kHz NR SCS scenario, with the assistance of network signaling on LTE channel bandwidth
crs-IM-nonDSS-NWA-15kHzSCS-r17 ENUMERATED {supported} OPTIONAL,
-- R4 24-4 CRS-IM in non-DSS and 30 kHz NR SCS scenario, without the assistance of network signaling on LTE channel bandwidth
crs-IM-nonDSS-30kHzSCS-r17 ENUMERATED {supported} OPTIONAL,
-- R4 24-5 CRS-IM in non-DSS and 30 kHz NR SCS scenario, with the assistance of network signaling on LTE channel bandwidth
crs-IM-nonDSS-NWA-30kHzSCS-r17 ENUMERATED {supported} OPTIONAL
}
-- TAG-FEATURESETDOWNLINKPERCC-STOP
-- ASN1STOP
– FeatureSetDownlinkPerCC-Id
The IE FeatureSetDownlinkPerCC-Id identifies a set of features applicable to one carrier of a feature set. The FeatureSetDownlinkPerCC-Id of a FeatureSetDownlinkPerCC is the index position of the FeatureSetDownlinkPerCC in the featureSetsDownlinkPerCC. The first element in the list is referred to by FeatureSetDownlinkPerCC-Id = 1, and so on.
FeatureSetDownlinkPerCC-Id information element
-- ASN1START
-- TAG-FEATURESETDOWNLINKPERCC-ID-START
FeatureSetDownlinkPerCC-Id ::= INTEGER (1..maxPerCC-FeatureSets)
-- TAG-FEATURESETDOWNLINKPERCC-ID-STOP
-- ASN1STOP
– FeatureSetEUTRA-DownlinkId
The IE FeatureSetEUTRA-DownlinkId identifies a downlink feature set in E-UTRA list (see TS 36.331 [10]. The first element in that list is referred to by FeatureSetEUTRA-DownlinkId = 1. The FeatureSetEUTRA-DownlinkId=0 is used when the UE does not support a carrier in this band of a band combination.
FeatureSetEUTRA-DownlinkId information element
-- ASN1START
-- TAG-FEATURESETEUTRADOWNLINKID-START
FeatureSetEUTRA-DownlinkId ::= INTEGER (0..maxEUTRA-DL-FeatureSets)
-- TAG-FEATURESETEUTRADOWNLINKID-STOP
-- ASN1STOP
– FeatureSetEUTRA-UplinkId
The IE FeatureSetEUTRA-UplinkId identifies an uplink feature set in E-UTRA list (see TS 36.331 [10]. The first element in that list is referred to by FeatureSetEUTRA-UplinkId = 1. The FeatureSetEUTRA-UplinkId =0 is used when the UE does not support a carrier in this band of a band combination.
FeatureSetEUTRA-UplinkId information element
-- ASN1START
-- TAG-FEATURESETEUTRAUPLINKID-START
FeatureSetEUTRA-UplinkId ::= INTEGER (0..maxEUTRA-UL-FeatureSets)
-- TAG-FEATURESETEUTRAUPLINKID-STOP
-- ASN1STOP
– FeatureSets
The IE FeatureSets is used to provide pools of downlink and uplink features sets. A FeatureSetCombination refers to the IDs of the feature set(s) that the UE supports in that FeatureSetCombination. The BandCombination entries in the BandCombinationList then indicate the ID of the FeatureSetCombination that the UE supports for that band combination.
The entries in the lists in this IE are identified by their index position. For example, the FeatureSetUplinkPerCC-Id = 4 identifies the 4th element in the featureSetsUplinkPerCC list.
NOTE: When feature sets (per CC) IEs require extension in future versions of the specification, new versions of the FeatureSetDownlink, FeatureSetUplink, FeatureSets, FeatureSetDownlinkPerCC and/or FeatureSetUplinkPerCC will be created and instantiated in corresponding new lists in the FeatureSets IE. For example, if new capability bits are to be added to the FeatureSetDownlink, they will instead be defined in a new FeatureSetDownlink-rxy which will be instantiated in a new featureSetDownlinkList-rxy list. If a UE indicates in a FeatureSetCombination that it supports the FeatureSetDownlink with ID #5, it implies that it supports both the features in FeatureSetDownlink #5 and FeatureSetDownlink-rxy #5 (if present). The number of entries in the new list(s) shall be the same as in the original list(s).
FeatureSets information element
-- ASN1START
-- TAG-FEATURESETS-START
FeatureSets ::= SEQUENCE {
featureSetsDownlink SEQUENCE (SIZE (1..maxDownlinkFeatureSets)) OF FeatureSetDownlink OPTIONAL,
featureSetsDownlinkPerCC SEQUENCE (SIZE (1..maxPerCC-FeatureSets)) OF FeatureSetDownlinkPerCC OPTIONAL,
featureSetsUplink SEQUENCE (SIZE (1..maxUplinkFeatureSets)) OF FeatureSetUplink OPTIONAL,
featureSetsUplinkPerCC SEQUENCE (SIZE (1..maxPerCC-FeatureSets)) OF FeatureSetUplinkPerCC OPTIONAL,
...,
[[
featureSetsDownlink-v1540 SEQUENCE (SIZE (1..maxDownlinkFeatureSets)) OF FeatureSetDownlink-v1540 OPTIONAL,
featureSetsUplink-v1540 SEQUENCE (SIZE (1..maxUplinkFeatureSets)) OF FeatureSetUplink-v1540 OPTIONAL,
featureSetsUplinkPerCC-v1540 SEQUENCE (SIZE (1..maxPerCC-FeatureSets)) OF FeatureSetUplinkPerCC-v1540 OPTIONAL
]],
[[
featureSetsDownlink-v15a0 SEQUENCE (SIZE (1..maxDownlinkFeatureSets)) OF FeatureSetDownlink-v15a0 OPTIONAL
]],
[[
featureSetsDownlink-v1610 SEQUENCE (SIZE (1..maxDownlinkFeatureSets)) OF FeatureSetDownlink-v1610 OPTIONAL,
featureSetsUplink-v1610 SEQUENCE (SIZE (1..maxUplinkFeatureSets)) OF FeatureSetUplink-v1610 OPTIONAL,
featureSetDownlinkPerCC-v1620 SEQUENCE (SIZE (1..maxPerCC-FeatureSets)) OF FeatureSetDownlinkPerCC-v1620 OPTIONAL
]],
[[
featureSetsUplink-v1630 SEQUENCE (SIZE (1..maxUplinkFeatureSets)) OF FeatureSetUplink-v1630 OPTIONAL
]],
[[
featureSetsUplink-v1640 SEQUENCE (SIZE (1..maxUplinkFeatureSets)) OF FeatureSetUplink-v1640 OPTIONAL
]],
[[
featureSetsDownlink-v1700 SEQUENCE (SIZE (1..maxDownlinkFeatureSets)) OF FeatureSetDownlink-v1700 OPTIONAL,
featureSetsDownlinkPerCC-v1700 SEQUENCE (SIZE (1..maxPerCC-FeatureSets)) OF FeatureSetDownlinkPerCC-v1700 OPTIONAL,
featureSetsUplink-v1710 SEQUENCE (SIZE (1..maxUplinkFeatureSets)) OF FeatureSetUplink-v1710 OPTIONAL,
featureSetsUplinkPerCC-v1700 SEQUENCE (SIZE (1..maxPerCC-FeatureSets)) OF FeatureSetUplinkPerCC-v1700 OPTIONAL
]],
[[
featureSetsDownlink-v1720 SEQUENCE (SIZE (1..maxDownlinkFeatureSets)) OF FeatureSetDownlink-v1720 OPTIONAL,
featureSetsDownlinkPerCC-v1720 SEQUENCE (SIZE (1..maxPerCC-FeatureSets)) OF FeatureSetDownlinkPerCC-v1720 OPTIONAL,
featureSetsUplink-v1720 SEQUENCE (SIZE (1..maxUplinkFeatureSets)) OF FeatureSetUplink-v1720 OPTIONAL
]],
[[
featureSetsDownlink-v1730 SEQUENCE (SIZE (1..maxDownlinkFeatureSets)) OF FeatureSetDownlink-v1730 OPTIONAL,
featureSetsDownlinkPerCC-v1730 SEQUENCE (SIZE (1..maxPerCC-FeatureSets)) OF FeatureSetDownlinkPerCC-v1730 OPTIONAL
]],
[[
featureSetsDownlinkPerCC-v1780 SEQUENCE (SIZE (1..maxPerCC-FeatureSets)) OF FeatureSetDownlinkPerCC-v1780 OPTIONAL,
featureSetsUplinkPerCC-v1780 SEQUENCE (SIZE (1..maxPerCC-FeatureSets)) OF FeatureSetUplinkPerCC-v1780 OPTIONAL
]],
[[
featureSetsDownlink-v1800 SEQUENCE (SIZE (1..maxDownlinkFeatureSets)) OF FeatureSetDownlink-v1800 OPTIONAL,
featureSetsDownlinkPerCC-v1800 SEQUENCE (SIZE (1..maxPerCC-FeatureSets)) OF FeatureSetDownlinkPerCC-v1800 OPTIONAL,
featureSetsUplink-v1800 SEQUENCE (SIZE (1..maxUplinkFeatureSets)) OF FeatureSetUplink-v1800 OPTIONAL,
featureSetsUplinkPerCC-v1800 SEQUENCE (SIZE (1..maxPerCC-FeatureSets)) OF FeatureSetUplinkPerCC-v1800 OPTIONAL
]],
[[
featureSetsDownlink-v1830 SEQUENCE (SIZE (1..maxDownlinkFeatureSets)) OF FeatureSetDownlink-v1830 OPTIONAL
]],
[[
featureSetsDownlinkPerCC-v1840 SEQUENCE (SIZE (1..maxPerCC-FeatureSets)) OF FeatureSetDownlinkPerCC-v1840 OPTIONAL,
featureSetsUplinkPerCC-v1840 SEQUENCE (SIZE (1..maxPerCC-FeatureSets)) OF FeatureSetUplinkPerCC-v1840 OPTIONAL
]],
[[
featureSetsUplink-v1850 SEQUENCE (SIZE (1..maxUplinkFeatureSets)) OF FeatureSetUplink-v1850 OPTIONAL,
featureSetsUplinkPerCC-v1850 SEQUENCE (SIZE (1..maxPerCC-FeatureSets)) OF FeatureSetUplinkPerCC-v1850 OPTIONAL
]]
}
FeatureSets-v16d0 ::= SEQUENCE {
featureSetsUplink-v16d0 SEQUENCE (SIZE (1..maxUplinkFeatureSets)) OF FeatureSetUplink-v16d0 OPTIONAL
}
-- TAG-FEATURESETS-STOP
-- ASN1STOP
– FeatureSetUplink
The IE FeatureSetUplink is used to indicate the features that the UE supports on the carriers corresponding to one band entry in a band combination.
FeatureSetUplink information element
-- ASN1START
-- TAG-FEATURESETUPLINK-START
FeatureSetUplink ::= SEQUENCE {
featureSetListPerUplinkCC SEQUENCE (SIZE (1.. maxNrofServingCells)) OF FeatureSetUplinkPerCC-Id,
scalingFactor ENUMERATED {f0p4, f0p75, f0p8} OPTIONAL,
dummy3 ENUMERATED {supported} OPTIONAL,
intraBandFreqSeparationUL FreqSeparationClass OPTIONAL,
searchSpaceSharingCA-UL ENUMERATED {supported} OPTIONAL,
dummy1 DummyI OPTIONAL,
supportedSRS-Resources SRS-Resources OPTIONAL,
twoPUCCH-Group ENUMERATED {supported} OPTIONAL,
dynamicSwitchSUL ENUMERATED {supported} OPTIONAL,
simultaneousTxSUL-NonSUL ENUMERATED {supported} OPTIONAL,
pusch-ProcessingType1-DifferentTB-PerSlot SEQUENCE {
scs-15kHz ENUMERATED {upto2, upto4, upto7} OPTIONAL,
scs-30kHz ENUMERATED {upto2, upto4, upto7} OPTIONAL,
scs-60kHz ENUMERATED {upto2, upto4, upto7} OPTIONAL,
scs-120kHz ENUMERATED {upto2, upto4, upto7} OPTIONAL
} OPTIONAL,
dummy2 DummyF OPTIONAL
}
FeatureSetUplink-v1540 ::= SEQUENCE {
zeroSlotOffsetAperiodicSRS ENUMERATED {supported} OPTIONAL,
pa-PhaseDiscontinuityImpacts ENUMERATED {supported} OPTIONAL,
pusch-SeparationWithGap ENUMERATED {supported} OPTIONAL,
pusch-ProcessingType2 SEQUENCE {
scs-15kHz ProcessingParameters OPTIONAL,
scs-30kHz ProcessingParameters OPTIONAL,
scs-60kHz ProcessingParameters OPTIONAL
} OPTIONAL,
ul-MCS-TableAlt-DynamicIndication ENUMERATED {supported} OPTIONAL
}
FeatureSetUplink-v1610 ::= SEQUENCE {
-- R1 11-5: PUsCH repetition Type B
pusch-RepetitionTypeB-r16 SEQUENCE {
maxNumberPUSCH-Tx-r16 ENUMERATED {n2, n3, n4, n7, n8, n12},
hoppingScheme-r16 ENUMERATED {interSlotHopping, interRepetitionHopping, both}
} OPTIONAL,
-- R1 11-7: UL cancelation scheme for self-carrier
ul-CancellationSelfCarrier-r16 ENUMERATED {supported} OPTIONAL,
-- R1 11-7a: UL cancelation scheme for cross-carrier
ul-CancellationCrossCarrier-r16 ENUMERATED {supported} OPTIONAL,
-- R1 16-5c: The maximum number of SRS resources in one SRS resource set with usage set to 'codebook' for Mode 2
ul-FullPwrMode2-MaxSRS-ResInSet-r16 ENUMERATED {n1, n2, n4} OPTIONAL,
-- R1 22-4a/4b/4c/4d: CBG based transmission for UL with unicast PUSCH(s) per slot per CC with UE processing time Capability 1
cbgPUSCH-ProcessingType1-DifferentTB-PerSlot-r16 SEQUENCE {
scs-15kHz-r16 ENUMERATED {one-pusch, upto2, upto4, upto7} OPTIONAL,
scs-30kHz-r16 ENUMERATED {one-pusch, upto2, upto4, upto7} OPTIONAL,
scs-60kHz-r16 ENUMERATED {one-pusch, upto2, upto4, upto7} OPTIONAL,
scs-120kHz-r16 ENUMERATED {one-pusch, upto2, upto4, upto7} OPTIONAL
} OPTIONAL,
-- R1 22-3a/3b/3c/3d: CBG based transmission for UL with unicast PUSCH(s) per slot per CC with UE processing time Capability 2
cbgPUSCH-ProcessingType2-DifferentTB-PerSlot-r16 SEQUENCE {
scs-15kHz-r16 ENUMERATED {one-pusch, upto2, upto4, upto7} OPTIONAL,
scs-30kHz-r16 ENUMERATED {one-pusch, upto2, upto4, upto7} OPTIONAL,
scs-60kHz-r16 ENUMERATED {one-pusch, upto2, upto4, upto7} OPTIONAL,
scs-120kHz-r16 ENUMERATED {one-pusch, upto2, upto4, upto7} OPTIONAL
} OPTIONAL,
supportedSRS-PosResources-r16 SRS-AllPosResources-r16 OPTIONAL,
intraFreqDAPS-UL-r16 SEQUENCE {
dummy ENUMERATED {supported} OPTIONAL,
intraFreqTwoTAGs-DAPS-r16 ENUMERATED {supported} OPTIONAL,
dummy1 ENUMERATED {supported} OPTIONAL,
dummy2 ENUMERATED {supported} OPTIONAL,
dummy3 ENUMERATED {short, long} OPTIONAL
} OPTIONAL,
intraBandFreqSeparationUL-v1620 FreqSeparationClassUL-v1620 OPTIONAL,
-- R1 11-3: More than one PUCCH for HARQ-ACK transmission within a slot
multiPUCCH-r16 SEQUENCE {
sub-SlotConfig-NCP-r16 ENUMERATED {set1, set2} OPTIONAL,
sub-SlotConfig-ECP-r16 ENUMERATED {set1, set2} OPTIONAL
} OPTIONAL,
-- R1 11-3c: 2 PUCCH of format 0 or 2 for a single 7*2-symbol subslot based HARQ-ACK codebook
twoPUCCH-Type1-r16 ENUMERATED {supported} OPTIONAL,
-- R1 11-3d: 2 PUCCH of format 0 or 2 for a single 2*7-symbol subslot based HARQ-ACK codebook
twoPUCCH-Type2-r16 ENUMERATED {supported} OPTIONAL,
-- R1 11-3e: 1 PUCCH format 0 or 2 and 1 PUCCH format 1, 3 or 4 in the same subslot for a single 2*7-symbol HARQ-ACK codebooks
twoPUCCH-Type3-r16 ENUMERATED {supported} OPTIONAL,
-- R1 11-3f: 2 PUCCH transmissions in the same subslot for a single 2*7-symbol HARQ-ACK codebooks which are not covered by 11-3d and
-- 11-3e
twoPUCCH-Type4-r16 ENUMERATED {supported} OPTIONAL,
-- R1 11-3g: SR/HARQ-ACK multiplexing once per subslot using a PUCCH (or HARQ-ACK piggybacked on a PUSCH) when SR/HARQ-ACK
-- are supposed to be sent with different starting symbols in a subslot
mux-SR-HARQ-ACK-r16 ENUMERATED {supported} OPTIONAL,
dummy1 ENUMERATED {supported} OPTIONAL,
dummy2 ENUMERATED {supported} OPTIONAL,
-- R1 11-4c: 2 PUCCH of format 0 or 2 for two HARQ-ACK codebooks with one 7*2-symbol sub-slot based HARQ-ACK codebook
twoPUCCH-Type5-r16 ENUMERATED {supported} OPTIONAL,
-- R1 11-4d: 2 PUCCH of format 0 or 2 in consecutive symbols for two HARQ-ACK codebooks with one 2*7-symbol sub-slot based HARQ-ACK
-- codebook
twoPUCCH-Type6-r16 ENUMERATED {supported} OPTIONAL,
-- R1 11-4e: 2 PUCCH of format 0 or 2 for two subslot based HARQ-ACK codebooks
twoPUCCH-Type7-r16 ENUMERATED {supported} OPTIONAL,
-- R1 11-4f: 1 PUCCH format 0 or 2 and 1 PUCCH format 1, 3 or 4 in the same subslot for HARQ-ACK codebooks with one 2*7-symbol
-- subslot based HARQ-ACK codebook
twoPUCCH-Type8-r16 ENUMERATED {supported} OPTIONAL,
-- R1 11-4g: 1 PUCCH format 0 or 2 and 1 PUCCH format 1, 3 or 4 in the same subslot for two subslot based HARQ-ACK codebooks
twoPUCCH-Type9-r16 ENUMERATED {supported} OPTIONAL,
-- R1 11-4h: 2 PUCCH transmissions in the same subslot for two HARQ-ACK codebooks with one 2*7-symbol subslot which are not covered
-- by 11-4c and 11-4e
twoPUCCH-Type10-r16 ENUMERATED {supported} OPTIONAL,
-- R1 11-4i: 2 PUCCH transmissions in the same subslot for two subslot based HARQ-ACK codebooks which are not covered by 11-4d and
-- 11-4f
twoPUCCH-Type11-r16 ENUMERATED {supported} OPTIONAL,
-- R1 12-1: UL intra-UE multiplexing/prioritization of overlapping channel/signals with two priority levels in physical layer
ul-IntraUE-Mux-r16 SEQUENCE {
pusch-PreparationLowPriority-r16 ENUMERATED {sym0, sym1, sym2},
pusch-PreparationHighPriority-r16 ENUMERATED {sym0, sym1, sym2}
} OPTIONAL,
-- R1 16-5a: Supported UL full power transmission mode of fullpower
ul-FullPwrMode-r16 ENUMERATED {supported} OPTIONAL,
-- R1 18-5d: Processing up to X unicast DCI scheduling for UL per scheduled CC
crossCarrierSchedulingProcessing-DiffSCS-r16 SEQUENCE {
scs-15kHz-120kHz-r16 ENUMERATED {n1,n2,n4} OPTIONAL,
scs-15kHz-60kHz-r16 ENUMERATED {n1,n2,n4} OPTIONAL,
scs-30kHz-120kHz-r16 ENUMERATED {n1,n2,n4} OPTIONAL,
scs-15kHz-30kHz-r16 ENUMERATED {n2} OPTIONAL,
scs-30kHz-60kHz-r16 ENUMERATED {n2} OPTIONAL,
scs-60kHz-120kHz-r16 ENUMERATED {n2} OPTIONAL
} OPTIONAL,
-- R1 16-5b: Supported UL full power transmission mode of fullpowerMode1
ul-FullPwrMode1-r16 ENUMERATED {supported} OPTIONAL,
-- R1 16-5c-2: Ports configuration for Mode 2
ul-FullPwrMode2-SRSConfig-diffNumSRSPorts-r16 ENUMERATED {p1-2, p1-4, p1-2-4} OPTIONAL,
-- R1 16-5c-3: TPMI group for Mode 2
ul-FullPwrMode2-TPMIGroup-r16 SEQUENCE {
twoPorts-r16 BIT STRING(SIZE(2)) OPTIONAL,
fourPortsNonCoherent-r16 ENUMERATED{g0, g1, g2, g3} OPTIONAL,
fourPortsPartialCoherent-r16 ENUMERATED{g0, g1, g2, g3, g4, g5, g6} OPTIONAL
} OPTIONAL
}
FeatureSetUplink-v1630 ::= SEQUENCE {
-- R1 22-8: For SRS for CB PUSCH and antenna switching on FR1 with symbol level offset for aperiodic SRS transmission
offsetSRS-CB-PUSCH-Ant-Switch-fr1-r16 ENUMERATED {supported} OPTIONAL,
-- R1 22-8a: PDCCH monitoring on any span of up to 3 consecutive OFDM symbols of a slot and constrained timeline for SRS for CB
-- PUSCH and antenna switching on FR1
offsetSRS-CB-PUSCH-PDCCH-MonitorSingleOcc-fr1-r16 ENUMERATED {supported} OPTIONAL,
-- R1 22-8b: For type 1 CSS with dedicated RRC configuration, type 3 CSS, and UE-SS, monitoring occasion can be any OFDM symbol(s)
-- of a slot for Case 2 and constrained timeline for SRS for CB PUSCH and antenna switching on FR1
offsetSRS-CB-PUSCH-PDCCH-MonitorAnyOccWithoutGap-fr1-r16 ENUMERATED {supported} OPTIONAL,
-- R1 22-8c: For type 1 CSS with dedicated RRC configuration, type 3 CSS, and UE-SS, monitoring occasion can be any OFDM symbol(s)
-- of a slot for Case 2 with a DCI gap and constrained timeline for SRS for CB PUSCH and antenna switching on FR1
offsetSRS-CB-PUSCH-PDCCH-MonitorAnyOccWithGap-fr1-r16 ENUMERATED {supported} OPTIONAL,
dummy ENUMERATED {supported} OPTIONAL,
-- R1 22-9: Cancellation of PUCCH, PUSCH or PRACH with a DCI scheduling a PDSCH or CSI-RS or a DCI format 2_0 for SFI
partialCancellationPUCCH-PUSCH-PRACH-TX-r16 ENUMERATED {supported} OPTIONAL
}
FeatureSetUplink-v1640 ::= SEQUENCE {
-- R1 11-4: Two HARQ-ACK codebooks with up to one sub-slot based HARQ-ACK codebook (i.e. slot-based + slot-based, or slot-based +
-- sub-slot based) simultaneously constructed for supporting HARQ-ACK codebooks with different priorities at a UE
twoHARQ-ACK-Codebook-type1-r16 SubSlot-Config-r16 OPTIONAL,
-- R1 11-4a: Two sub-slot based HARQ-ACK codebooks simultaneously constructed for supporting HARQ-ACK codebooks with different
-- priorities at a UE
twoHARQ-ACK-Codebook-type2-r16 SubSlot-Config-r16 OPTIONAL,
-- R1 22-8d: All PDCCH monitoring occasion can be any OFDM symbol(s) of a slot for Case 2 with a span gap and constrained timeline
-- for SRS for CB PUSCH and antenna switching on FR1
offsetSRS-CB-PUSCH-PDCCH-MonitorAnyOccWithSpanGap-fr1-r16 SEQUENCE {
scs-15kHz-r16 ENUMERATED {set1, set2, set3} OPTIONAL,
scs-30kHz-r16 ENUMERATED {set1, set2, set3} OPTIONAL,
scs-60kHz-r16 ENUMERATED {set1, set2, set3} OPTIONAL
} OPTIONAL
}
FeatureSetUplink-v16d0 ::= SEQUENCE {
pusch-RepetitionTypeB-v16d0 SEQUENCE {
maxNumberPUSCH-Tx-Cap1-r16 ENUMERATED {n2, n3, n4, n7, n8, n12},
maxNumberPUSCH-Tx-Cap2-r16 ENUMERATED {n2, n3, n4, n7, n8, n12}
} OPTIONAL
}
FeatureSetUplink-v1710 ::= SEQUENCE {
-- R1 23-3-1 Multi-TRP PUSCH repetition (type A) -codebook based
mTRP-PUSCH-TypeA-CB-r17 ENUMERATED {n1,n2,n4} OPTIONAL,
-- R1 23-3-1-2 Multi-TRP PUSCH repetition (type A) - non-codebook based
mTRP-PUSCH-RepetitionTypeA-r17 ENUMERATED {n1,n2,n3,n4} OPTIONAL,
-- R1 23-3-3 Multi-TRP PUCCH repetition-intra-slot
mTRP-PUCCH-IntraSlot-r17 ENUMERATED {pf0-2, pf1-3-4, pf0-4} OPTIONAL,
-- R1 23-8-4 Maximum 2 SP and 1 periodic SRS sets for antenna switching
srs-AntennaSwitching2SP-1Periodic-r17 ENUMERATED {supported} OPTIONAL,
-- R1 23-8-9 Extension of aperiodic SRS configuration for 1T4R, 1T2R and 2T4R
srs-ExtensionAperiodicSRS-r17 ENUMERATED {supported} OPTIONAL,
-- R1 23-8-10 1 aperiodic SRS resource set for 1T4R
srs-OneAP-SRS-r17 ENUMERATED {supported} OPTIONAL,
-- R4 16-8 UE power class per band per band combination
ue-PowerClassPerBandPerBC-r17 ENUMERATED {pc1dot5, pc2, pc3} OPTIONAL,
-- R4 17-8 UL transmission in FR2 bands within an UL gap when the UL gap is activated
tx-Support-UL-GapFR2-r17 ENUMERATED {supported} OPTIONAL
}
FeatureSetUplink-v1720 ::= SEQUENCE {
-- R1 25-3: Repetitions for PUCCH format 0, 1, 2, 3 and 4 over multiple PUCCH subslots with configured K = 2, 4, 8
pucch-Repetition-F0-1-2-3-4-RRC-Config-r17 ENUMERATED {supported} OPTIONAL,
-- R1 25-3a: Repetitions for PUCCH format 0, 1, 2, 3 and 4 over multiple PUCCH subslots using dynamic repetition indication
pucch-Repetition-F0-1-2-3-4-DynamicIndication-r17 ENUMERATED {supported} OPTIONAL,
-- R1 25-3b: Inter-subslot frequency hopping for PUCCH repetitions
interSubslotFreqHopping-PUCCH-r17 ENUMERATED {supported} OPTIONAL,
-- R1 25-8: Semi-static HARQ-ACK codebook for sub-slot PUCCH
semiStaticHARQ-ACK-CodebookSub-SlotPUCCH-r17 ENUMERATED {supported} OPTIONAL,
-- R1 25-14: PHY prioritization of overlapping low-priority DG-PUSCH and high-priority CG-PUSCH
phy-PrioritizationLowPriorityDG-HighPriorityCG-r17 INTEGER(1..16) OPTIONAL,
-- R1 25-15: PHY prioritization of overlapping high-priority DG-PUSCH and low-priority CG-PUSCH
phy-PrioritizationHighPriorityDG-LowPriorityCG-r17 SEQUENCE {
pusch-PreparationLowPriority-r17 ENUMERATED{sym0, sym1, sym2},
additionalCancellationTime-r17 SEQUENCE {
scs-15kHz-r17 ENUMERATED{sym0, sym1, sym2} OPTIONAL,
scs-30kHz-r17 ENUMERATED{sym0, sym1, sym2, sym3, sym4} OPTIONAL,
scs-60kHz-r17 ENUMERATED{sym0, sym1, sym2, sym3, sym4, sym5, sym6, sym7, sym8} OPTIONAL,
scs-120kHz-r17 ENUMERATED{sym0, sym1, sym2, sym3, sym4, sym5, sym6, sym7, sym8, sym9,
sym10, sym11, sym12, sym13, sym14, sym15, sym16} OPTIONAL
},
maxNumberCarriers-r17 INTEGER(1..16)
} OPTIONAL,
-- R4 17-5 Support of UL DC location(s) report
extendedDC-LocationReport-r17 ENUMERATED {supported} OPTIONAL
}
FeatureSetUplink-v1800 ::= SEQUENCE {
-- R1 40-3-3-1a: Supported maximum delay value larger than D_basic
maxDelayValueBeyondD-Basic-r18 ENUMERATED {sl2,sl3,sl4,sl5,sl6,sl10} OPTIONAL,
-- R1 40-3-3-2: Number of delay values
tdcp-NumberDelayValue-r18 INTEGER (2..4) OPTIONAL,
-- R1 40-3-3-4: Phase report
phaseReportMoreThanOne-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-3-3-6: Maximum number of TRS resource sets in a report configuration
maxNumberTRS-ResourceSet-r18 INTEGER (2..3) OPTIONAL,
-- R1 40-3-3-7: Maximum number of TDCP report settings per-BWP
maxNumberTDCP-PerBWP-r18 INTEGER (1..4) OPTIONAL,
-- R1 40-4-6c: DMRS type for Rel.18 enhanced DMRS ports for PUSCH
pusch-DMRS-TypeEnh-r18 SEQUENCE {
dmrs-Type-r18 ENUMERATED {etype1, both},
pusch-TypeA-DMRS-r18 SEQUENCE {
-- R1 40-4-6: Basic feature of Rel.18 enhanced DMRS ports for PUSCH for scheduling mapping of type A for Rel.18 enhanced
-- DMRS ports
dmrs-TypeA-r18 ENUMERATED {supported},
-- R1 40-4-6d: 2 symbols front-loaded DMRS (uplink) for Rel.18 enhanced DMRS ports for PUSCH
pusch-2SymbolFL-DMRS-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-4-6e: 2-symbol FL DMRS + one additional 2-symbols DMRS for Rel.18 enhanced DMRS ports for PUSCH
pusch-2SymbolFL-DMRS-Addition2Symbol-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-4-6f: 1 symbol FL DMRS and 3 additional DMRS symbols for Rel.18 enhanced DMRS ports for PUSCH
pusch-1SymbolFL-DMRS-Addition3Symbol-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-4-6k: 1 symbol FL DMRS and 2 additional DMRS symbols for more than one port for Rel.18 enhanced DMRS ports for
-- PUSCH
pusch-1SymbolFL-DMRS-BeyondOnePort-r18 ENUMERATED {supported} OPTIONAL
} OPTIONAL,
-- R1 40-4-10: DMRS port configuration for PUSCH with 8Tx
dummy ENUMERATED {rel15, both} OPTIONAL,
-- R1 40-4-6a: Basic feature of Rel.18 enhanced DMRS ports for PUSCH for scheduling type B for Rel.18 enhanced DMRS ports
pusch-TypeB-DMRS-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-4-6g: 1 port UL PTRS for Rel.18 enhanced DMRS ports for PUSCH with rank 1-4
pusch-rank-1-4-1Port-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-4-6h: 1 port UL PTRS for Rel.18 enhanced DMRS ports for PUSCH with rank 5-8
pusch-rank-5-8-1Port-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-4-6i: 2 port UL PTRS for Rel.18 enhanced DMRS ports for PUSCH with rank 1-4
pusch-rank-1-4-2Port-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-4-6j: 2 port UL PTRS for Rel.18 enhanced DMRS ports for PUSCH with rank 5-8
pusch-rank-5-8-2Port-r18 ENUMERATED {supported} OPTIONAL
} OPTIONAL,
-- R1 40-4-13: Support Rel-18 UL DMRS with single-DCI based M-TRP
ul-DMRS-SingleDCI-M-TRP-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-4-14: Support Rel-18 UL DMRS with M-DCI based M-TRP
ul-DMRS-M-DCI-M-TRP-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-5-5: Maximum 2 SP and 1 periodic SRS sets for 8T8R antenna switching
srs-AntennaSwitching8T8R2SP-1Periodic-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-6-4: Single-DCI based STx2P SFN scheme for PUCCH
pucch-SingleDCI-STx2P-SFN-r18 ENUMERATED {pf0-2, pf1-3-4, pf0-4} OPTIONAL,
-- R1 41-4-6: Positioning SRS bandwidth aggregation in RRC_CONNECTED
posSRS-BWA-RRC-Connected-r18 PosSRS-BWA-RRC-Connected-r18 OPTIONAL,
-- R1 41-4-7: Positioning SRS bandwidth aggregation independent from UL communication CA in RRC_CONNECTED
posSRS-BWA-IndependentCA-RRC-Connected-r18 PosSRS-BWA-IndependentCA-RRC-Connected-r18 OPTIONAL,
-- R1 41-4-9: Indicate which other bands in the band combination are affected due to the need of a guard period
posSRS-BWA-AffectedBandList-r18 SEQUENCE (SIZE (1..maxBands)) OF FreqBandIndicatorNR OPTIONAL,
-- R1 45-5a: RACH-based early TA acquisition with simultaneous transmission
rach-EarlyTA-BandList-r18 SEQUENCE (SIZE (1..maxBandsMRDC)) OF BOOLEAN OPTIONAL,
-- R1 49-6: Two HARQ-ACK codebooks with up to one sub-slot based HARQ-ACK codebook simultaneously constructed for supporting
-- HARQ-ACK codebooks with different priorities by DCI format 1_3
simultaneous-2-1-HARQ-ACK-CB-r18 SubSlot-Config-r16 OPTIONAL,
-- R1 49-6a: Two HARQ-ACK codebooks with two sub-slot based HARQ-ACK codebook simultaneously constructed for supporting
-- HARQ-ACK codebooks with different priorities by DCI format 1_3
simultaneous-2-2-HARQ-ACK-CB-r18 SubSlot-Config-r16 OPTIONAL,
-- R1 49-7: UL intra-UE multiplexing/prioritization of overlapping channel/signals with two priority levels in physical
-- layer for DCI format 1_3/0_3
ul-IntraUE-MuxEnh-r18 SEQUENCE {
pusch-PreparationLowPriority-r18 ENUMERATED {sym0, sym1, sym2},
pusch-PreparationHighPriority-r18 ENUMERATED {sym0, sym1, sym2}
} OPTIONAL,
-- R4 27-1 TxDiversity for 4Tx
txDiversity4Tx-r18 ENUMERATED {supported} OPTIONAL,
-- R4 41-2: Power boosting for DFT-s-OFDM pi/2 BPSK and QPSK transmissions without modified spectrum flatness requirement
powerBoosting-pi2BPSK-QPSK-r18 ENUMERATED {supported} OPTIONAL,
-- R4 41-3: Power boosting for DFT-s-OFDM pi/2 BPSK and QPSK transmissions with modified spectrum flatness requirement shaping
powerBoosting-pi2BPSK-QPSK-Modified-r18 ENUMERATED {supported} OPTIONAL,
-- R4 44-1 TxDiversity for 2Tx
txDiversity2Tx-r18 ENUMERATED {supported} OPTIONAL,
ue-PowerClassPerBandPerBC-v1820 ENUMERATED {pc5} OPTIONAL
}
FeatureSetUplink-v1850 ::= SEQUENCE {
-- R1 40-4-10: DMRS port configuration for PUSCH with 8Tx
pusch-DMRS8Tx-r18 ENUMERATED {rel15, both} OPTIONAL,
-- R1 40-7-1h: UE 8Tx PUSCH processing capability for codebook
additionalTime-CB-8TxPUSCH-r18 SEQUENCE {
scs-15kHz-r18 ENUMERATED {sym1, sym2, sym4} OPTIONAL,
scs-30kHz-r18 ENUMERATED {sym1, sym2, sym4, sym8} OPTIONAL,
scs-60kHz-r18 ENUMERATED {sym2, sym4, sym8, sym16} OPTIONAL,
scs-120kHz-r18 ENUMERATED {sym4, sym8, sym16, sym32} OPTIONAL,
scs-480kHz-r18 ENUMERATED {sym16, sym32, sym64, sym128} OPTIONAL,
scs-960kHz-r18 ENUMERATED {sym32, sym64, sym128, sym256} OPTIONAL
} OPTIONAL,
-- R1 40-7-2b: UE 8Tx PUSCH processing capability for non-codebook
additionalTime-NonCB-8TxPUSCH-r18 SEQUENCE {
scs-15kHz-r18 ENUMERATED {sym1, sym2, sym4} OPTIONAL,
scs-30kHz-r18 ENUMERATED {sym1, sym2, sym4, sym8} OPTIONAL,
scs-60kHz-r18 ENUMERATED {sym2, sym4, sym8, sym16} OPTIONAL,
scs-120kHz-r18 ENUMERATED {sym4, sym8, sym16, sym32} OPTIONAL,
scs-480kHz-r18 ENUMERATED {sym16, sym32, sym64, sym128} OPTIONAL,
scs-960kHz-r18 ENUMERATED {sym32, sym64, sym128, sym256} OPTIONAL
} OPTIONAL
}
SubSlot-Config-r16 ::= SEQUENCE {
sub-SlotConfig-NCP-r16 ENUMERATED {n4,n5,n6,n7} OPTIONAL,
sub-SlotConfig-ECP-r16 ENUMERATED {n4,n5,n6} OPTIONAL
}
SRS-AllPosResources-r16 ::= SEQUENCE {
srs-PosResources-r16 SRS-PosResources-r16,
srs-PosResourceAP-r16 SRS-PosResourceAP-r16 OPTIONAL,
srs-PosResourceSP-r16 SRS-PosResourceSP-r16 OPTIONAL
}
SRS-PosResources-r16 ::= SEQUENCE {
maxNumberSRS-PosResourceSetPerBWP-r16 ENUMERATED {n1, n2, n4, n8, n12, n16},
maxNumberSRS-PosResourcesPerBWP-r16 ENUMERATED {n1, n2, n4, n8, n16, n32, n64},
maxNumberSRS-ResourcesPerBWP-PerSlot-r16 ENUMERATED {n1, n2, n3, n4, n5, n6, n8, n10, n12, n14},
maxNumberPeriodicSRS-PosResourcesPerBWP-r16 ENUMERATED {n1, n2, n4, n8, n16, n32, n64},
maxNumberPeriodicSRS-PosResourcesPerBWP-PerSlot-r16 ENUMERATED {n1, n2, n3, n4, n5, n6, n8, n10, n12, n14}
}
SRS-PosResourceAP-r16 ::= SEQUENCE {
maxNumberAP-SRS-PosResourcesPerBWP-r16 ENUMERATED {n1, n2, n4, n8, n16, n32, n64},
maxNumberAP-SRS-PosResourcesPerBWP-PerSlot-r16 ENUMERATED {n1, n2, n3, n4, n5, n6, n8, n10, n12, n14}
}
SRS-PosResourceSP-r16 ::= SEQUENCE {
maxNumberSP-SRS-PosResourcesPerBWP-r16 ENUMERATED {n1, n2, n4, n8, n16, n32, n64},
maxNumberSP-SRS-PosResourcesPerBWP-PerSlot-r16 ENUMERATED {n1, n2, n3, n4, n5, n6, n8, n10, n12, n14}
}
SRS-Resources ::= SEQUENCE {
maxNumberAperiodicSRS-PerBWP ENUMERATED {n1, n2, n4, n8, n16},
maxNumberAperiodicSRS-PerBWP-PerSlot INTEGER (1..6),
maxNumberPeriodicSRS-PerBWP ENUMERATED {n1, n2, n4, n8, n16},
maxNumberPeriodicSRS-PerBWP-PerSlot INTEGER (1..6),
maxNumberSemiPersistentSRS-PerBWP ENUMERATED {n1, n2, n4, n8, n16},
maxNumberSemiPersistentSRS-PerBWP-PerSlot INTEGER (1..6),
maxNumberSRS-Ports-PerResource ENUMERATED {n1, n2, n4}
}
DummyF ::= SEQUENCE {
maxNumberPeriodicCSI-ReportPerBWP INTEGER (1..4),
maxNumberAperiodicCSI-ReportPerBWP INTEGER (1..4),
maxNumberSemiPersistentCSI-ReportPerBWP INTEGER (0..4),
simultaneousCSI-ReportsAllCC INTEGER (5..32)
}
PosSRS-BWA-RRC-Connected-r18 ::= SEQUENCE {
numOfCarriersIntraBandContiguous-r18 ENUMERATED {two, three, twoandthree},
maximumAggregatedBW-TwoCarriersFR1-r18 ENUMERATED {mhz20, mhz40, mhz50, mhz80, mhz100,
mhz160, mhz180, mhz190, mhz200} OPTIONAL,
maximumAggregatedBW-TwoCarriersFR2-r18 ENUMERATED {mhz50, mhz100, mhz200, mhz400, mhz600, mhz800} OPTIONAL,
maximumAggregatedBW-ThreeCarriersFR1-r18 ENUMERATED {mhz80, mhz100, mhz160, mhz200, mhz240, mhz300} OPTIONAL,
maximumAggregatedBW-ThreeCarriersFR2-r18 ENUMERATED {mhz50, mhz100, mhz200, mhz300, mhz400,
mhz600, mhz800, mhz1000, mhz1200}
OPTIONAL,
maximumAggregatedResourceSet-r18 ENUMERATED {n1, n2, n4, n8, n12, n16},
maximumAggregatedResourcePeriodic-r18 ENUMERATED {n1, n2, n4, n8, n16, n32, n64},
maximumAggregatedResourceAperiodic-r18 ENUMERATED {n0, n1, n2, n4, n8, n16, n32, n64},
maximumAggregatedResourceSemi-r18 ENUMERATED {n0, n1, n2, n4, n8, n16, n32, n64},
maximumAggregatedResourcePeriodicPerSlot-r18 ENUMERATED {n1, n2, n3, n4, n5, n6, n8, n10, n12, n14},
maximumAggregatedResourceAperiodicPerSlot-r18 ENUMERATED {n0, n1, n2, n3, n4, n5, n6, n8, n10, n12, n14},
maximumAggregatedResourceSemiPerSlot-r18 ENUMERATED {n0, n1, n2, n3, n4, n5, n6, n8, n10, n12, n14},
...
}
PosSRS-BWA-IndependentCA-RRC-Connected-r18 ::= SEQUENCE {
numOfCarriersIntraBandContiguous-r18 ENUMERATED {two, three, twoandthree},
maximumAggregatedBW-TwoCarriersFR1-r18 ENUMERATED {mhz20, mhz40, mhz50, mhz80, mhz100,
mhz160, mhz180, mhz190, mhz200} OPTIONAL,
maximumAggregatedBW-TwoCarriersFR2-r18 ENUMERATED {mhz50, mhz100, mhz200, mhz400, mhz600, mhz800} OPTIONAL,
maximumAggregatedBW-ThreeCarriersFR1-r18 ENUMERATED {mhz80, mhz100, mhz160, mhz200, mhz240, mhz300} OPTIONAL,
maximumAggregatedBW-ThreeCarriersFR2-r18 ENUMERATED {mhz50, mhz100, mhz200, mhz300, mhz400,
mhz600, mhz800, mhz1000, mhz1200}
OPTIONAL,
maximumAggregatedResourceSet-r18 ENUMERATED {n1, n2, n4, n8, n12, n16},
maximumAggregatedResourcePeriodic-r18 ENUMERATED {n1, n2, n4, n8, n16, n32, n64},
maximumAggregatedResourceAperiodic-r18 ENUMERATED {n0, n1, n2, n4, n8, n16, n32, n64},
maximumAggregatedResourceSemi-r18 ENUMERATED {n0, n1, n2, n4, n8, n16, n32, n64},
maximumAggregatedResourcePeriodicPerSlot-r18 ENUMERATED {n1, n2, n3, n4, n5, n6, n8, n10, n12, n14},
maximumAggregatedResourceAperiodicPerSlot-r18 ENUMERATED {n0, n1, n2, n3, n4, n5, n6, n8, n10, n12, n14},
maximumAggregatedResourceSemiPerSlot-r18 ENUMERATED {n0, n1, n2, n3, n4, n5, n6, n8, n10, n12, n14},
guardPeriod-r18 ENUMERATED {n0, n30, n100, n140, n200},
powerClassForTwoAggregatedCarriers-r18 ENUMERATED {pc2, pc3} OPTIONAL,
powerClassForThreeAggregatedCarriers-r18 ENUMERATED {pc2, pc3} OPTIONAL,
...
}
-- TAG-FEATURESETUPLINK-STOP
-- ASN1STOP
– FeatureSetUplinkId
The IE FeatureSetUplinkId identifies an uplink feature set. The FeatureSetUplinkId of a FeatureSetUplink is the index position of the FeatureSetUplink in the featureSetsUplink list in the FeatureSets IE. The first element in the list is referred to by FeatureSetUplinkId = 1, and so on. The FeatureSetUplinkId =0 is not used by an actual FeatureSetUplink but means that the UE does not support a carrier in this band of a band combination.
FeatureSetUplinkId information element
-- ASN1START
-- TAG-FEATURESETUPLINKID-START
FeatureSetUplinkId ::= INTEGER (0..maxUplinkFeatureSets)
-- TAG-FEATURESETUPLINKID-STOP
-- ASN1STOP
– FeatureSetUplinkPerCC
The IE FeatureSetUplinkPerCC indicates a set of features that the UE supports on the corresponding carrier of one band entry of a band combination.
FeatureSetUplinkPerCC information element
-- ASN1START
-- TAG-FEATURESETUPLINKPERCC-START
FeatureSetUplinkPerCC ::= SEQUENCE {
supportedSubcarrierSpacingUL SubcarrierSpacing,
supportedBandwidthUL SupportedBandwidth,
channelBW-90mhz ENUMERATED {supported} OPTIONAL,
mimo-CB-PUSCH SEQUENCE {
maxNumberMIMO-LayersCB-PUSCH MIMO-LayersUL OPTIONAL,
maxNumberSRS-ResourcePerSet INTEGER (1..2)
} OPTIONAL,
maxNumberMIMO-LayersNonCB-PUSCH MIMO-LayersUL OPTIONAL,
supportedModulationOrderUL ModulationOrder OPTIONAL
}
FeatureSetUplinkPerCC-v1540 ::= SEQUENCE {
mimo-NonCB-PUSCH SEQUENCE {
maxNumberSRS-ResourcePerSet INTEGER (1..4),
maxNumberSimultaneousSRS-ResourceTx INTEGER (1..4)
} OPTIONAL
}
FeatureSetUplinkPerCC-v1700 ::= SEQUENCE {
supportedMinBandwidthUL-r17 SupportedBandwidth-v1700 OPTIONAL,
-- R1 23-3-1-3 FeMIMO: Multi-TRP PUSCH repetition (type B) - non-codebook based
mTRP-PUSCH-RepetitionTypeB-r17 ENUMERATED {n1,n2,n3,n4} OPTIONAL,
-- R1 23-3-1-1 -codebook based Multi-TRP PUSCH repetition (type B)
mTRP-PUSCH-TypeB-CB-r17 ENUMERATED {n1,n2,n4} OPTIONAL,
supportedBandwidthUL-v1710 SupportedBandwidth-v1700 OPTIONAL
}
FeatureSetUplinkPerCC-v1780 ::= SEQUENCE {
supportedBandwidthUL-v1780 SupportedBandwidth-v1700 OPTIONAL
}
FeatureSetUplinkPerCC-v1800 ::= SEQUENCE {
-- R1 40-2-7: Two TAs for multi-DCI STxMP PUSCH+PUSCH
twoPUSCH-MultiDCI-STx2P-TwoTA-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-6-1: Single-DCI based STx2P SDM scheme for PUSCH-codebook
pusch-CB-SingleDCI-STx2P-SDM-r18 SEQUENCE {
maxNumberSRS-ResourcePerSet-r18 ENUMERATED {n1,n2,n4},
maxNumberLayerPerPanel-r18 INTEGER (1..2),
maxNumberNZP-PUSCH-PortsPerSet-r18 ENUMERATED {n1,n2,n4},
maxNumberSRS-AntennaPortsPerSet-r18 ENUMERATED {n1,n2,n4}
} OPTIONAL,
-- R1 40-6-1a: Single-DCI based STx2P SDM scheme for PUSCH-noncodebook
pusch-NonCB-SingleDCI-STx2P-SDM-r18 SEQUENCE {
maxNumberSRS-ResourcePerSet-r18 INTEGER (1..4),
maxNumberLayerPerPanel-r18 INTEGER (1..2),
maxNumberSimulSRS-OneResourcePerSet-r18 INTEGER (1..4),
maxNumberSimulSRS-TwoResourcePerSet-r18 INTEGER (1..8)
} OPTIONAL,
-- R1 40-6-2: Single-DCI based STx2P SFN scheme for PUSCH-codebook
pusch-CB-SingleDCI-STx2P-SFN-r18 SEQUENCE {
maxNumberSRS-ResourcePerSet-r18 ENUMERATED {n1,n2,n4},
maxNumberLayerPerSet-r18 INTEGER (1..2),
maxNumberSRS-AntennaPortsPerSet-r18 ENUMERATED {n1,n2,n4},
maxNumberNZP-PUSCH-PortsPerSet-r18 ENUMERATED {n1,n2,n4}
} OPTIONAL,
-- R1 40-6-2a: Single-DCI based STx2P SFN scheme for PUSCH-noncodebook
pusch-NonCB-SingleDCI-STx2P-SFN-r18 SEQUENCE {
maxNumberSRS-ResourcePerSet-r18 INTEGER (1..4),
maxNumberLayerPerSet-r18 INTEGER (1..2),
maxNumberSimulSRS-OneResourcePerSet-r18 INTEGER (1..4),
maxNumberSimulSRS-TwoResourcePerSet-r18 INTEGER (1..8)
} OPTIONAL,
-- R1 40-6-3a: codebook multi-DCI based STx2P PUSCH+PUSCH for DG+DG
twoPUSCH-CB-MultiDCI-STx2P-DG-DG-r18 SEQUENCE {
maxNumberSRS-ResourcePerSet-r18 ENUMERATED {n1, n2, n4},
maxNumberLayerOverlapping-r18 INTEGER (1..2),
maxNumberNZP-PUSCH-Overlapping-r18 ENUMERATED {n1, n2, n4},
maxNumberPUSCH-PerCORESET-PerSlot-r18 SEQUENCE {
scs-60kHz-r18 ENUMERATED {n1,n2,n3,n4,n7} OPTIONAL,
scs-120kHz-r18 ENUMERATED {n1,n2,n3,n4,n7} OPTIONAL
} OPTIONAL,
maxNumberTotalLayerOverlapping-r18 INTEGER (2..4),
maxNumberSRS-AntennaPortsPerSet-r18 ENUMERATED {n1,n2,n4}
} OPTIONAL,
-- R1 40-6-3b: Noncodebook multi-DCI based STx2P PUSCH+PUSCH for DG+DG
twoPUSCH-NonCB-MultiDCI-STx2P-DG-DG-r18 SEQUENCE {
maxNumberSRS-ResourcePerSet-r18 INTEGER (1..4),
maxNumberLayerOverlapping-r18 INTEGER (1..2),
maxNumberSimulSRS-ResourcePerSet-r18 INTEGER (1..4),
maxNumberPUSCH-PerCORESET-PerSlot-r18 SEQUENCE {
scs-60kHz-r18 ENUMERATED {n1,n2,n3,n4,n7} OPTIONAL,
scs-120kHz-r18 ENUMERATED {n1,n2,n3,n4,n7} OPTIONAL
} OPTIONAL,
maxNumberTotalLayerOverlapping-r18 INTEGER (2..4)
} OPTIONAL,
-- R1 40-6-6: Out-of-order operation for multi-DCI based STx2P PUSCH+PUSCH
twoPUSCH-MultiDCI-STx2P-OutOfOrder-r18 ENUMERATED {supported} OPTIONAL,
codebookParameter8TxPUSCH-r18 SEQUENCE {
-- R1 40-7-1: Basic features for Codebook-based 8Tx PUSCH
codebook-8TxBasic-r18 SEQUENCE {
maxNumberPUSCH-MIMO-Layer-r18 INTEGER (1..8),
maxNumberSRS-Resource-r18 INTEGER (1..2),
srs-8TxPorts-r18 ENUMERATED {noTDM, both}
},
-- R1 40-7-1a: Codebook-based 8Tx PUSCH-codebook1
codebook1-8TxPUSCH-r18 SEQUENCE {
codebookN1N4-r18 ENUMERATED {ng1n4n1,ng1n2n2,both} OPTIONAL,
srs-8TxPorts-r18 ENUMERATED {noTDM, both}
},
-- R1 40-7-1b: Codebook-based 8Tx PUSCH-codebook2
codebook2-8TxPUSCH-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-7-1c: Codebook-based 8Tx PUSCH-codebook3
codebook3-8TxPUSCH-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-7-1d: Codebook-based 8Tx PUSCH-codebook4
codebook4-8TxPUSCH-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-7-1e: UL full power transmission mode 0
ul-FullPwrTransMode0-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-7-1f: UL full power transmission mode 1
ul-FullPwrTransMode1-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-7-1g: UL full power transmission mode 2 with 1/2/4 resources
ul-FullPwrTransMode2-r18 ENUMERATED {n1,n2,n4} OPTIONAL,
-- R1 40-7-1g-1: SRS resources for UL full power transmission mode 2
ul-SRS-TransMode2-r18 BIT STRING (SIZE(3)) OPTIONAL,
-- R1 40-7-1g-2: TPMI group(s) which delivers full power for codebook2
tpmi-FullPwrCodebook2-r18 ENUMERATED {first, second} OPTIONAL
} OPTIONAL,
-- R1 40-7-2: Basic features for Non-Codebook-based 8Tx PUSCH
nonCodebook-8TxPUSCH-r18 SEQUENCE {
maxNumberPUSCH-MIMO-Layer-r18 INTEGER (1..8),
maxNumberSRS-Resource-r18 INTEGER (1..8),
maxNumberSimultaneousSRS-r18 INTEGER (1..8)
} OPTIONAL,
-- R1 40-7-2a: Association between CSI-RS and SRS for non-codebook case
nonCodebook-CSI-RS-SRS-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-7-3: CBG based 2 CWs PUSCH with rank >4
cgb-2CW-PUSCH-r18 ENUMERATED {supported} OPTIONAL
}
FeatureSetUplinkPerCC-v1840 ::= SEQUENCE {
supportedBandwidthUL-v1840 SupportedBandwidth-v1840 OPTIONAL,
supportedMinBandwidthUL-v1840 SupportedBandwidth-v1840 OPTIONAL
}
FeatureSetUplinkPerCC-v1850 ::= SEQUENCE {
-- R1 40-6-3a-1: UE STxMP processing capability for codebook
twoPUSCH-CB-MultiDCI-STx2P-AdditionalTime-r18 CHOICE {
scs-60kHz-r18 ENUMERATED {sym1, sym4, sym8, sym16},
scs-120kHz-r18 ENUMERATED {sym4, sym8, sym16, sym32},
scs-480kHz-r18 ENUMERATED {sym16, sym32, sym64, sym128},
scs-960kHz-r18 ENUMERATED {sym32, sym64, sym128,sym256}
} OPTIONAL,
-- R1 40-6-3b-2: UE STxMP processing capability for non-codebook
twoPUSCH-NonCB-MultiDCI-STx2P-AdditionalTime-r18 CHOICE {
scs-60kHz-r18 ENUMERATED {sym1, sym4, sym8, sym16},
scs-120kHz-r18 ENUMERATED {sym4, sym8, sym16, sym32},
scs-480kHz-r18 ENUMERATED {sym16, sym32, sym64, sym128},
scs-960kHz-r18 ENUMERATED {sym32, sym64, sym128,sym256}
} OPTIONAL
}
-- TAG-FEATURESETUPLINKPERCC-STOP
-- ASN1STOP
– FeatureSetUplinkPerCC-Id
The IE FeatureSetUplinkPerCC-Id identifies a set of features applicable to one carrier of a feature set. The FeatureSetUplinkPerCC-Id of a FeatureSetUplinkPerCC is the index position of the FeatureSetUplinkPerCC in the featureSetsUplinkPerCC. The first element in the list is referred to by FeatureSetUplinkPerCC-Id = 1, and so on.
FeatureSetUplinkPerCC-Id information element
-- ASN1START
-- TAG-FEATURESETUPLINKPERCC-ID-START
FeatureSetUplinkPerCC-Id ::= INTEGER (1..maxPerCC-FeatureSets)
-- TAG-FEATURESETUPLINKPERCC-ID-STOP
-- ASN1STOP
– FreqBandIndicatorEUTRA
-- ASN1START
-- TAG-FREQBANDINDICATOREUTRA-START
FreqBandIndicatorEUTRA ::= INTEGER (1..maxBandsEUTRA)
-- TAG-FREQBANDINDICATOREUTRA-STOP
-- ASN1STOP
– FreqBandList
The IE FreqBandList is used by the network to request NR CA, NR non-CA and/or MR-DC band combinations for specific NR and/or E-UTRA frequency bands and/or up to a specific number of carriers and/or up to specific aggregated bandwidth. This is also used to request feature sets (for NR) and feature set combinations (for NR and MR-DC). For NR sidelink communication, this is used by the initiating UE to request sidelink UE radio access capabilities from the peer UE. This is also used to request lower MSD capability for specific NR frequency bands for the UE supporting lower MSD.
FreqBandList information element
-- ASN1START
-- TAG-FREQBANDLIST-START
FreqBandList ::= SEQUENCE (SIZE (1..maxBandsMRDC)) OF FreqBandInformation
FreqBandInformation ::= CHOICE {
bandInformationEUTRA FreqBandInformationEUTRA,
bandInformationNR FreqBandInformationNR
}
FreqBandInformationEUTRA ::= SEQUENCE {
bandEUTRA FreqBandIndicatorEUTRA,
ca-BandwidthClassDL-EUTRA CA-BandwidthClassEUTRA OPTIONAL, -- Need N
ca-BandwidthClassUL-EUTRA CA-BandwidthClassEUTRA OPTIONAL -- Need N
}
FreqBandInformationNR ::= SEQUENCE {
bandNR FreqBandIndicatorNR,
maxBandwidthRequestedDL AggregatedBandwidth OPTIONAL, -- Need N
maxBandwidthRequestedUL AggregatedBandwidth OPTIONAL, -- Need N
maxCarriersRequestedDL INTEGER (1..maxNrofServingCells) OPTIONAL, -- Need N
maxCarriersRequestedUL INTEGER (1..maxNrofServingCells) OPTIONAL -- Need N
}
AggregatedBandwidth ::= ENUMERATED {mhz50, mhz100, mhz150, mhz200, mhz250, mhz300, mhz350,
mhz400, mhz450, mhz500, mhz550, mhz600, mhz650, mhz700, mhz750, mhz800}
-- TAG-FREQBANDLIST-STOP
-- ASN1STOP
– FreqSeparationClass
The IE FreqSeparationClass is used for an intra-band non-contiguous CA band combination to indicate frequency separation between lower edge of lowest CC and upper edge of highest CC in a frequency band.
FreqSeparationClass information element
-- ASN1START
-- TAG-FREQSEPARATIONCLASS-START
FreqSeparationClass ::= ENUMERATED { mhz800, mhz1200, mhz1400, ..., mhz400-v1650, mhz600-v1650}
FreqSeparationClassDL-v1620 ::= ENUMERATED {mhz1000, mhz1600, mhz1800, mhz2000, mhz2200, mhz2400}
FreqSeparationClassUL-v1620 ::= ENUMERATED {mhz1000}
-- TAG-FREQSEPARATIONCLASS-STOP
-- ASN1STOP
– FreqSeparationClassDL-Only
The IE FreqSeparationClassDL-Only is used to indicate the frequency separation between lower edge of lowest CC and upper edge of highest CC of DL only frequency spectrum in a frequency band.
FreqSeparationClassDL-Only information element
-- ASN1START
-- TAG-FREQSEPARATIONCLASSDL-Only-START
FreqSeparationClassDL-Only-r16 ::= ENUMERATED {mhz200, mhz400, mhz600, mhz800, mhz1000, mhz1200}
-- TAG-FREQSEPARATIONCLASSDL-Only-STOP
-- ASN1STOP
– FR2-2-AccessParamsPerBand
The IE FR2-2-AccessParamsPerBand is used to convey FR2-2 related parameters specific for a certain frequency band (not per feature set or band combination).
FR2-2-AccessParamsPerBand information element
-- ASN1START
-- TAG-FR2-2-ACCESSPARAMSPERBAND-START
FR2-2-AccessParamsPerBand-r17 ::= SEQUENCE {
-- R1 24-1: Basic FR2-2 DL support
dl-FR2-2-SCS-120kHz-r17 ENUMERATED {supported} OPTIONAL,
-- R1 24-1a: Basic FR2-2 UL support
ul-FR2-2-SCS-120kHz-r17 ENUMERATED {supported} OPTIONAL,
-- R1 24-2: 120KHz SSB support for initial access in FR2-2
initialAccessSSB-120kHz-r17 ENUMERATED {supported} OPTIONAL,
-- R1 24-1b: Wideband PRACH for 120 kHz in FR2-2
widebandPRACH-SCS-120kHz-r17 ENUMERATED {supported} OPTIONAL,
-- R1 24-1c: Multi-RB support PUCCH format 0/1/4 for 120 kHz in FR2-2
multiRB-PUCCH-SCS-120kHz-r17 ENUMERATED {supported} OPTIONAL,
-- R1 24-1d: Multiple PDSCH scheduling by single DCI for 120kHz in FR2-2
multiPDSCH-SingleDCI-FR2-2-SCS-120kHz-r17 ENUMERATED {supported} OPTIONAL,
-- R1 24-1e: Multiple PUSCH scheduling by single DCI for 120kHz in FR2-2
multiPUSCH-SingleDCI-FR2-2-SCS-120kHz-r17 ENUMERATED {supported} OPTIONAL,
-- R1 24-4: 480KHz SCS support for DL
dl-FR2-2-SCS-480kHz-r17 ENUMERATED {supported} OPTIONAL,
-- R1 24-4a: 480KHz SCS support for UL
ul-FR2-2-SCS-480kHz-r17 ENUMERATED {supported} OPTIONAL,
-- R1 24-3: 480KHz SSB support for initial access in FR2-2
initialAccessSSB-480kHz-r17 ENUMERATED {supported} OPTIONAL,
-- R1 24-4b: Wideband PRACH for 480 kHz in FR2-2
widebandPRACH-SCS-480kHz-r17 ENUMERATED {supported} OPTIONAL,
-- R1 24-4c: Multi-RB support PUCCH format 0/1/4 for 480 kHz in FR2-2
multiRB-PUCCH-SCS-480kHz-r17 ENUMERATED {supported} OPTIONAL,
-- R1 24-4f: Enhanced PDCCH monitoring for 480KHz in FR2-2
enhancedPDCCH-monitoringSCS-480kHz-r17 ENUMERATED {supported} OPTIONAL,
-- R1 24-5: 960KHz SCS support for DL
dl-FR2-2-SCS-960kHz-r17 ENUMERATED {supported} OPTIONAL,
-- R1 24-5a: 960KHz SCS support for UL
ul-FR2-2-SCS-960kHz-r17 ENUMERATED {supported} OPTIONAL,
-- R1 24-5c: Multi-RB support PUCCH format 0/1/4 for 960 kHz in FR2-2
multiRB-PUCCH-SCS-960kHz-r17 ENUMERATED {supported} OPTIONAL,
-- R1 24-5f: Enhanced PDCCH monitoring for 960KHz in FR2-2
enhancedPDCCH-monitoringSCS-960kHz-r17 SEQUENCE {
pdcch-monitoring4-1-r17 ENUMERATED {supported} OPTIONAL,
pdcch-monitoring4-2-r17 ENUMERATED {supported} OPTIONAL,
pdcch-monitoring8-4-r17 ENUMERATED {supported} OPTIONAL
} OPTIONAL,
-- R1 24-6: Type 1 channel access procedure in uplink for FR2-2 with shared spectrum channel access
type1-ChannelAccess-FR2-2-r17 ENUMERATED {supported} OPTIONAL,
-- R1 24-7: Type 2 channel access procedure in uplink for FR2-2 with shared spectrum channel access
type2-ChannelAccess-FR2-2-r17 ENUMERATED {supported} OPTIONAL,
-- R1 24-10: Reduced beam switching time delay
reduced-BeamSwitchTiming-FR2-2-r17 ENUMERATED {supported} OPTIONAL,
-- R1 24-8: 32 DL HARQ processes for FR 2-2
support32-DL-HARQ-ProcessPerSCS-r17 SEQUENCE {
scs-120kHz-r17 ENUMERATED {supported} OPTIONAL,
scs-480kHz-r17 ENUMERATED {supported} OPTIONAL,
scs-960kHz-r17 ENUMERATED {supported} OPTIONAL
} OPTIONAL,
-- R1 24-9: 32 UL HARQ processes for FR 2-2
support32-UL-HARQ-ProcessPerSCS-r17 SEQUENCE {
scs-120kHz-r17 ENUMERATED {supported} OPTIONAL,
scs-480kHz-r17 ENUMERATED {supported} OPTIONAL,
scs-960kHz-r17 ENUMERATED {supported} OPTIONAL
} OPTIONAL,
...,
[[
-- R4 15-1: 64QAM for PUSCH for FR2-2
modulation64-QAM-PUSCH-FR2-2-r17 ENUMERATED {supported} OPTIONAL
]]
}
-- TAG-FR2-2-ACCESSPARAMSPERBAND-STOP
-- ASN1STOP
– HighSpeedParameters
The IE HighSpeedParameters is used to convey capabilities related to high speed scenarios.
HighSpeedParameters information element
-- ASN1START
-- TAG-HIGHSPEEDPARAMETERS-START
HighSpeedParameters-r16 ::= SEQUENCE {
measurementEnhancement-r16 ENUMERATED {supported} OPTIONAL,
demodulationEnhancement-r16 ENUMERATED {supported} OPTIONAL
}
HighSpeedParameters-v1650 ::= CHOICE {
intraNR-MeasurementEnhancement-r16 ENUMERATED {supported},
interRAT-MeasurementEnhancement-r16 ENUMERATED {supported}
}
HighSpeedParameters-v1700 ::= SEQUENCE {
-- R4 18-1: Enhanced RRM requirements specified for CA for FR1 HST
measurementEnhancementCA-r17 ENUMERATED {supported} OPTIONAL,
-- R4 18-2: Enhanced RRM requirements specified for inter-frequency measurement in connected mode for FR1 HST
measurementEnhancementInterFreq-r17 ENUMERATED {supported} OPTIONAL
}
-- TAG-HIGHSPEEDPARAMETERS-STOP
-- ASN1STOP
– IMS-Parameters
The IE IMS-Parameters is used to convey capabilities related to IMS.
IMS-Parameters information element
-- ASN1START
-- TAG-IMS-PARAMETERS-START
IMS-Parameters ::= SEQUENCE {
ims-ParametersCommon IMS-ParametersCommon OPTIONAL,
ims-ParametersFRX-Diff IMS-ParametersFRX-Diff OPTIONAL,
...
}
IMS-Parameters-v1700 ::= SEQUENCE {
ims-ParametersFR2-2-r17 IMS-ParametersFR2-2-r17 OPTIONAL
}
IMS-ParametersCommon ::= SEQUENCE {
voiceOverEUTRA-5GC ENUMERATED {supported} OPTIONAL,
...,
[[
voiceOverSCG-BearerEUTRA-5GC ENUMERATED {supported} OPTIONAL
]],
[[
voiceFallbackIndicationEPS-r16 ENUMERATED {supported} OPTIONAL
]]
}
IMS-ParametersFRX-Diff ::= SEQUENCE {
voiceOverNR ENUMERATED {supported} OPTIONAL,
...
}
IMS-ParametersFR2-2-r17 ::= SEQUENCE {
voiceOverNR-r17 ENUMERATED {supported} OPTIONAL,
...
}
-- TAG-IMS-PARAMETERS-STOP
-- ASN1STOP
– InterRAT-Parameters
The IE InterRAT-Parameters is used convey UE capabilities related to the other RATs.
InterRAT-Parameters information element
-- ASN1START
-- TAG-INTERRAT-PARAMETERS-START
InterRAT-Parameters ::= SEQUENCE {
eutra EUTRA-Parameters OPTIONAL,
...,
[[
utra-FDD-r16 UTRA-FDD-Parameters-r16 OPTIONAL
]]
}
EUTRA-Parameters ::= SEQUENCE {
supportedBandListEUTRA SEQUENCE (SIZE (1..maxBandsEUTRA)) OF FreqBandIndicatorEUTRA,
eutra-ParametersCommon EUTRA-ParametersCommon OPTIONAL,
eutra-ParametersXDD-Diff EUTRA-ParametersXDD-Diff OPTIONAL,
...
}
EUTRA-ParametersCommon ::= SEQUENCE {
mfbi-EUTRA ENUMERATED {supported} OPTIONAL,
modifiedMPR-BehaviorEUTRA BIT STRING (SIZE (32)) OPTIONAL,
multiNS-Pmax-EUTRA ENUMERATED {supported} OPTIONAL,
rs-SINR-MeasEUTRA ENUMERATED {supported} OPTIONAL,
...,
[[
ne-DC ENUMERATED {supported} OPTIONAL
]],
[[
nr-HO-ToEN-DC-r16 ENUMERATED {supported} OPTIONAL
]]
}
EUTRA-ParametersXDD-Diff ::= SEQUENCE {
rsrqMeasWidebandEUTRA ENUMERATED {supported} OPTIONAL,
...
}
UTRA-FDD-Parameters-r16 ::= SEQUENCE {
supportedBandListUTRA-FDD-r16 SEQUENCE (SIZE (1..maxBandsUTRA-FDD-r16)) OF SupportedBandUTRA-FDD-r16,
...
}
SupportedBandUTRA-FDD-r16 ::= ENUMERATED {
bandI, bandII, bandIII, bandIV, bandV, bandVI,
bandVII, bandVIII, bandIX, bandX, bandXI,
bandXII, bandXIII, bandXIV, bandXV, bandXVI,
bandXVII, bandXVIII, bandXIX, bandXX,
bandXXI, bandXXII, bandXXIII, bandXXIV,
bandXXV, bandXXVI, bandXXVII, bandXXVIII,
bandXXIX, bandXXX, bandXXXI, bandXXXII}
-- TAG-INTERRAT-PARAMETERS-STOP
-- ASN1STOP
– MAC-Parameters
The IE MAC-Parameters is used to convey capabilities related to MAC.
MAC-Parameters information element
-- ASN1START
-- TAG-MAC-PARAMETERS-START
MAC-Parameters ::= SEQUENCE {
mac-ParametersCommon MAC-ParametersCommon OPTIONAL,
mac-ParametersXDD-Diff MAC-ParametersXDD-Diff OPTIONAL
}
MAC-Parameters-v1610 ::= SEQUENCE {
mac-ParametersFRX-Diff-r16 MAC-ParametersFRX-Diff-r16 OPTIONAL
}
MAC-Parameters-v1700 ::= SEQUENCE {
mac-ParametersFR2-2-r17 MAC-ParametersFR2-2-r17 OPTIONAL
}
MAC-Parameters-v17b0 ::= SEQUENCE {
mTRP-PUSCH-PHR-Type1-Reporting-r17 ENUMERATED {supported} OPTIONAL
}
MAC-Parameters-v17c0 ::= SEQUENCE {
directSCellActivationWithTCI-r17 ENUMERATED {supported} OPTIONAL
}
MAC-ParametersCommon ::= SEQUENCE {
lcp-Restriction ENUMERATED {supported} OPTIONAL,
dummy ENUMERATED {supported} OPTIONAL,
lch-ToSCellRestriction ENUMERATED {supported} OPTIONAL,
...,
[[
recommendedBitRate ENUMERATED {supported} OPTIONAL,
recommendedBitRateQuery ENUMERATED {supported} OPTIONAL
]],
[[
recommendedBitRateMultiplier-r16 ENUMERATED {supported} OPTIONAL,
preEmptiveBSR-r16 ENUMERATED {supported} OPTIONAL,
autonomousTransmission-r16 ENUMERATED {supported} OPTIONAL,
lch-PriorityBasedPrioritization-r16 ENUMERATED {supported} OPTIONAL,
lch-ToConfiguredGrantMapping-r16 ENUMERATED {supported} OPTIONAL,
lch-ToGrantPriorityRestriction-r16 ENUMERATED {supported} OPTIONAL,
singlePHR-P-r16 ENUMERATED {supported} OPTIONAL,
ul-LBT-FailureDetectionRecovery-r16 ENUMERATED {supported} OPTIONAL,
-- R4 8-1: MPE
tdd-MPE-P-MPR-Reporting-r16 ENUMERATED {supported} OPTIONAL,
lcid-ExtensionIAB-r16 ENUMERATED {supported} OPTIONAL
]],
[[
spCell-BFR-CBRA-r16 ENUMERATED {supported} OPTIONAL
]],
[[
srs-ResourceId-Ext-r16 ENUMERATED {supported} OPTIONAL
]],
[[
enhancedUuDRX-forSidelink-r17 ENUMERATED {supported} OPTIONAL,
--27-10: Support of UL MAC CE based MG activation request for PRS measurements
mg-ActivationRequestPRS-Meas-r17 ENUMERATED {supported} OPTIONAL,
--27-11: Support of DL MAC CE based MG activation request for PRS measurements
mg-ActivationCommPRS-Meas-r17 ENUMERATED {supported} OPTIONAL,
intraCG-Prioritization-r17 ENUMERATED {supported} OPTIONAL,
jointPrioritizationCG-Retx-Timer-r17 ENUMERATED {supported} OPTIONAL,
survivalTime-r17 ENUMERATED {supported} OPTIONAL,
lcg-ExtensionIAB-r17 ENUMERATED {supported} OPTIONAL,
harq-FeedbackDisabled-r17 ENUMERATED {supported} OPTIONAL,
uplink-Harq-ModeB-r17 ENUMERATED {supported} OPTIONAL,
sr-TriggeredBy-TA-Report-r17 ENUMERATED {supported} OPTIONAL,
extendedDRX-CycleInactive-r17 ENUMERATED {supported} OPTIONAL,
simultaneousSR-PUSCH-DiffPUCCH-groups-r17 ENUMERATED {supported} OPTIONAL,
lastTransmissionUL-r17 ENUMERATED {supported} OPTIONAL
]],
[[
harq-RTT-TimerDL-ForNTN-MulticastMBS-r17 ENUMERATED {supported} OPTIONAL
]],
[[
sr-TriggeredByTA-ReportATG-r18 ENUMERATED {supported} OPTIONAL,
extendedDRX-CycleInactive-r18 ENUMERATED {supported} OPTIONAL,
additionalBS-Table-r18 ENUMERATED {supported} OPTIONAL,
delayStatusReport-r18 ENUMERATED {supported} OPTIONAL,
cg-RetransmissionMonitoringDisabling-r18 ENUMERATED {supported} OPTIONAL,
non-IntegerDRX-r18 ENUMERATED {supported} OPTIONAL
]]
}
MAC-ParametersFRX-Diff-r16 ::= SEQUENCE {
directMCG-SCellActivation-r16 ENUMERATED {supported} OPTIONAL,
directMCG-SCellActivationResume-r16 ENUMERATED {supported} OPTIONAL,
directSCG-SCellActivation-r16 ENUMERATED {supported} OPTIONAL,
directSCG-SCellActivationResume-r16 ENUMERATED {supported} OPTIONAL,
-- R1 19-1: DRX Adaptation
drx-Adaptation-r16 SEQUENCE {
non-SharedSpectrumChAccess-r16 MinTimeGap-r16 OPTIONAL,
sharedSpectrumChAccess-r16 MinTimeGap-r16 OPTIONAL
} OPTIONAL,
...
}
MAC-ParametersFR2-2-r17 ::= SEQUENCE {
directMCG-SCellActivation-r17 ENUMERATED {supported} OPTIONAL,
directMCG-SCellActivationResume-r17 ENUMERATED {supported} OPTIONAL,
directSCG-SCellActivation-r17 ENUMERATED {supported} OPTIONAL,
directSCG-SCellActivationResume-r17 ENUMERATED {supported} OPTIONAL,
drx-Adaptation-r17 SEQUENCE {
non-SharedSpectrumChAccess-r17 MinTimeGapFR2-2-r17 OPTIONAL,
sharedSpectrumChAccess-r17 MinTimeGapFR2-2-r17 OPTIONAL
} OPTIONAL,
...
}
MAC-ParametersXDD-Diff ::= SEQUENCE {
skipUplinkTxDynamic ENUMERATED {supported} OPTIONAL,
logicalChannelSR-DelayTimer ENUMERATED {supported} OPTIONAL,
longDRX-Cycle ENUMERATED {supported} OPTIONAL,
shortDRX-Cycle ENUMERATED {supported} OPTIONAL,
multipleSR-Configurations ENUMERATED {supported} OPTIONAL,
multipleConfiguredGrants ENUMERATED {supported} OPTIONAL,
...,
[[
secondaryDRX-Group-r16 ENUMERATED {supported} OPTIONAL
]],
[[
enhancedSkipUplinkTxDynamic-r16 ENUMERATED {supported} OPTIONAL,
enhancedSkipUplinkTxConfigured-r16 ENUMERATED {supported} OPTIONAL
]],
[[
dummy1 ENUMERATED {supported} OPTIONAL,
dummy2 ENUMERATED {supported} OPTIONAL
]]
}
MinTimeGap-r16 ::= SEQUENCE {
scs-15kHz-r16 ENUMERATED {sl1, sl3} OPTIONAL,
scs-30kHz-r16 ENUMERATED {sl1, sl6} OPTIONAL,
scs-60kHz-r16 ENUMERATED {sl1, sl12} OPTIONAL,
scs-120kHz-r16 ENUMERATED {sl2, sl24} OPTIONAL
}
MinTimeGapFR2-2-r17 ::= SEQUENCE {
scs-120kHz-r17 ENUMERATED {sl2, sl24} OPTIONAL,
scs-480kHz-r17 ENUMERATED {sl8, sl96} OPTIONAL,
scs-960kHz-r17 ENUMERATED {sl16, sl192} OPTIONAL
}
MAC-ParametersPerBand-r18 ::= SEQUENCE {
ptm-Retransmission-r18 ENUMERATED {supported} OPTIONAL,
ptm-RetransmissionInactive-r18 ENUMERATED {supported} OPTIONAL,
...
}
-- TAG-MAC-PARAMETERS-STOP
-- ASN1STOP
– MeasAndMobParameters
The IE MeasAndMobParameters is used to convey UE capabilities related to measurements for radio resource management (RRM), radio link monitoring (RLM) and mobility (e.g. handover).
MeasAndMobParameters information element
-- ASN1START
-- TAG-MEASANDMOBPARAMETERS-START
MeasAndMobParameters ::= SEQUENCE {
measAndMobParametersCommon MeasAndMobParametersCommon OPTIONAL,
measAndMobParametersXDD-Diff MeasAndMobParametersXDD-Diff OPTIONAL,
measAndMobParametersFRX-Diff MeasAndMobParametersFRX-Diff OPTIONAL
}
MeasAndMobParameters-v1700 ::= SEQUENCE {
measAndMobParametersFR2-2-r17 MeasAndMobParametersFR2-2-r17 OPTIONAL
}
MeasAndMobParametersCommon ::= SEQUENCE {
supportedGapPattern BIT STRING (SIZE (22)) OPTIONAL,
ssb-RLM ENUMERATED {supported} OPTIONAL,
ssb-AndCSI-RS-RLM ENUMERATED {supported} OPTIONAL,
...,
[[
eventB-MeasAndReport ENUMERATED {supported} OPTIONAL,
handoverFDD-TDD ENUMERATED {supported} OPTIONAL,
eutra-CGI-Reporting ENUMERATED {supported} OPTIONAL,
nr-CGI-Reporting ENUMERATED {supported} OPTIONAL
]],
[[
independentGapConfig ENUMERATED {supported} OPTIONAL,
periodicEUTRA-MeasAndReport ENUMERATED {supported} OPTIONAL,
handoverFR1-FR2 ENUMERATED {supported} OPTIONAL,
maxNumberCSI-RS-RRM-RS-SINR ENUMERATED {n4, n8, n16, n32, n64, n96} OPTIONAL
]],
[[
nr-CGI-Reporting-ENDC ENUMERATED {supported} OPTIONAL
]],
[[
eutra-CGI-Reporting-NEDC ENUMERATED {supported} OPTIONAL,
eutra-CGI-Reporting-NRDC ENUMERATED {supported} OPTIONAL,
nr-CGI-Reporting-NEDC ENUMERATED {supported} OPTIONAL,
nr-CGI-Reporting-NRDC ENUMERATED {supported} OPTIONAL
]],
[[
reportAddNeighMeasForPeriodic-r16 ENUMERATED {supported} OPTIONAL,
condHandoverParametersCommon-r16 SEQUENCE {
condHandoverFDD-TDD-r16 ENUMERATED {supported} OPTIONAL,
condHandoverFR1-FR2-r16 ENUMERATED {supported} OPTIONAL
} OPTIONAL,
nr-NeedForGap-Reporting-r16 ENUMERATED {supported} OPTIONAL,
supportedGapPattern-NRonly-r16 BIT STRING (SIZE (10)) OPTIONAL,
supportedGapPattern-NRonly-NEDC-r16 ENUMERATED {supported} OPTIONAL,
maxNumberCLI-RSSI-r16 ENUMERATED {n8, n16, n32, n64} OPTIONAL,
maxNumberCLI-SRS-RSRP-r16 ENUMERATED {n4, n8, n16, n32} OPTIONAL,
maxNumberPerSlotCLI-SRS-RSRP-r16 ENUMERATED {n2, n4, n8} OPTIONAL,
mfbi-IAB-r16 ENUMERATED {supported} OPTIONAL,
dummy ENUMERATED {supported} OPTIONAL,
nr-CGI-Reporting-NPN-r16 ENUMERATED {supported} OPTIONAL,
idleInactiveEUTRA-MeasReport-r16 ENUMERATED {supported} OPTIONAL,
idleInactive-ValidityArea-r16 ENUMERATED {supported} OPTIONAL,
eutra-AutonomousGaps-r16 ENUMERATED {supported} OPTIONAL,
eutra-AutonomousGaps-NEDC-r16 ENUMERATED {supported} OPTIONAL,
eutra-AutonomousGaps-NRDC-r16 ENUMERATED {supported} OPTIONAL,
pcellT312-r16 ENUMERATED {supported} OPTIONAL,
supportedGapPattern-r16 BIT STRING (SIZE (2)) OPTIONAL
]],
[[
-- R4 19-2 Concurrent measurement gaps
concurrentMeasGap-r17 CHOICE {
concurrentPerUE-OnlyMeasGap-r17 ENUMERATED {supported},
concurrentPerUE-PerFRCombMeasGap-r17 ENUMERATED {supported}
} OPTIONAL,
-- R4 19-1 Network controlled small gap (NCSG)
nr-NeedForGapNCSG-Reporting-r17 ENUMERATED {supported} OPTIONAL,
eutra-NeedForGapNCSG-Reporting-r17 ENUMERATED {supported} OPTIONAL,
-- R4 19-1-1 per FR Network controlled small gap (NCSG)
ncsg-MeasGapPerFR-r17 ENUMERATED {supported} OPTIONAL,
-- R4 19-1-2 Network controlled small gap (NCSG) supported patterns
ncsg-MeasGapPatterns-r17 BIT STRING (SIZE(24)) OPTIONAL,
-- R4 19-1-3 Network controlled small gap (NCSG) supported NR-only patterns
ncsg-MeasGapNR-Patterns-r17 BIT STRING (SIZE(24)) OPTIONAL,
-- R4 19-3-2 pre-configured measurement gap
preconfiguredUE-AutonomousMeasGap-r17 ENUMERATED {supported} OPTIONAL,
-- R4 19-3-1 pre-configured measurement gap
preconfiguredNW-ControlledMeasGap-r17 ENUMERATED {supported} OPTIONAL,
handoverFR1-FR2-2-r17 ENUMERATED {supported} OPTIONAL,
handoverFR2-1-FR2-2-r17 ENUMERATED {supported} OPTIONAL,
-- RAN4 14-1: per-FR MG for PRS measurement
independentGapConfigPRS-r17 ENUMERATED {supported} OPTIONAL,
rrm-RelaxationRRC-ConnectedRedCap-r17 ENUMERATED {supported} OPTIONAL,
-- R4 25-3: Parallel measurements with multiple measurement gaps
parallelMeasurementGap-r17 ENUMERATED {n2} OPTIONAL,
condHandoverWithSCG-NRDC-r17 ENUMERATED {supported} OPTIONAL,
gNB-ID-LengthReporting-r17 ENUMERATED {supported} OPTIONAL,
gNB-ID-LengthReporting-ENDC-r17 ENUMERATED {supported} OPTIONAL,
gNB-ID-LengthReporting-NEDC-r17 ENUMERATED {supported} OPTIONAL,
gNB-ID-LengthReporting-NRDC-r17 ENUMERATED {supported} OPTIONAL,
gNB-ID-LengthReporting-NPN-r17 ENUMERATED {supported} OPTIONAL
]],
[[
-- R4 25-1: Parallel measurements on multiple SMTC-s for a single frequency carrier
parallelSMTC-r17 ENUMERATED {n4} OPTIONAL,
-- R4 19-2-1 Concurrent measurement gaps for EUTRA
concurrentMeasGapEUTRA-r17 ENUMERATED {supported} OPTIONAL,
serviceLinkPropDelayDiffReporting-r17 ENUMERATED {supported} OPTIONAL,
-- R4 19-1-4 Network controlled small gap (NCSG) performing measurement based on flag deriveSSB-IndexFromCellInter
ncsg-SymbolLevelScheduleRestrictionInter-r17 ENUMERATED {supported} OPTIONAL
]],
[[
eventD1-MeasReportTrigger-r17 ENUMERATED {supported} OPTIONAL,
independentGapConfig-maxCC-r17 SEQUENCE {
fr1-Only-r17 INTEGER (1..32) OPTIONAL,
fr2-Only-r17 INTEGER (1..32) OPTIONAL,
fr1-AndFR2-r17 INTEGER (1..32) OPTIONAL
} OPTIONAL
]],
[[
interSatMeas-r17 ENUMERATED {supported} OPTIONAL,
deriveSSB-IndexFromCellInterNon-NCSG-r17 ENUMERATED {supported} OPTIONAL
]],
[[
-- R4 31-1 Enhanced L3 measurement reporting for unknown SCell activation if the valid L3 measurement results are available
l3-MeasUnknownSCellActivation-r18 ENUMERATED {supported} OPTIONAL,
-- R4 31-3 Shorter measurement interval for unknown SCell activation
shortMeasInterval-r18 ENUMERATED {supported} OPTIONAL,
nr-NeedForInterruptionReport-r18 ENUMERATED {supported} OPTIONAL,
measSequenceConfig-r18 ENUMERATED {supported} OPTIONAL,
cellIndividualOffsetPerMeasEvent-r18 ENUMERATED {supported} OPTIONAL,
eventD2-MeasReportTrigger-r18 ENUMERATED {supported} OPTIONAL,
-- R4 32-1: Concurrent gaps with Pre-MG in a FR
concurrentMeasGapsPreMG-r18 ENUMERATED {supported} OPTIONAL,
-- R4 32-2: Support for dynamic collisions
dynamicCollision-r18 ENUMERATED {supported} OPTIONAL,
-- R4 32-3: Concurrent gaps with NCSG in a FR
concurrentMeasGapsNCSG-r18 ENUMERATED {supported} OPTIONAL,
-- R4 32-4: Inter-RAT EUTRAN measurements without gap and outside active DL BWP
eutra-NoGapMeasurementOutsideBWP-r18 ENUMERATED {supported} OPTIONAL,
-- R4 32-5: Inter-RAT EUTRAN measurement without gap and within active DL BWP
eutra-NoGapMeasurementInsideBWP-r18 ENUMERATED {supported} OPTIONAL,
-- R4 32-6: Effective measurement window for inter-RAT EUTRAN measurements
eutra-MeasEMW-r18 BIT STRING (SIZE(6)) OPTIONAL,
-- R4 32-7: Simultaneous reception of NR data and EUTRAN CRS with different numerology
concurrentMeasCRS-InsideBWP-EUTRA-r18 ENUMERATED {supported} OPTIONAL,
-- R4 39-2a: SSB based inter-frequency L1-RSRP measurements with measurement gaps
ltm-InterFreqMeasGap-r18 ENUMERATED {supported} OPTIONAL,
dummy-ltm-FastUE-Processing-r18 SEQUENCE {
fr1-r18 ENUMERATED {ms10, ms15},
fr2-r18 ENUMERATED {ms10, ms15},
fr1-AndFR2-r18 ENUMERATED {ms20, ms30}
} OPTIONAL,
rach-LessHandoverInterFreq-r18 ENUMERATED {supported} OPTIONAL,
enterAndLeaveCellReport-r18 ENUMERATED {supported} OPTIONAL,
bestCellChangeReport-r18 ENUMERATED {supported} OPTIONAL,
secondBestCellChangeReport-r18 ENUMERATED {supported} OPTIONAL
]],
[[
ltm-InterFreq-r18 ENUMERATED {supported} OPTIONAL,
ltm-MCG-NRDC-r18 ENUMERATED {supported} OPTIONAL,
ltm-RACH-LessDG-r18 ENUMERATED {supported} OPTIONAL,
ltm-RACH-LessCG-r18 ENUMERATED {supported} OPTIONAL,
ltm-Recovery-r18 ENUMERATED {supported} OPTIONAL,
ltm-ReferenceConfig-r18 ENUMERATED {supported} OPTIONAL,
ltm-MCG-NRDC-Release-r18 ENUMERATED {supported} OPTIONAL,
-- R4 39-7: Faster UE processing time during cell switch
ltm-FastUE-Processing-r18 SEQUENCE {
fr1-r18 ENUMERATED {ms10, ms15} OPTIONAL,
fr2-r18 ENUMERATED {ms10, ms15} OPTIONAL,
fr1-AndFR2-r18 ENUMERATED {ms20, ms30} OPTIONAL
} OPTIONAL,
ntn-NeighbourCellInfoSupport-r18 ENUMERATED {supported} OPTIONAL
]],
[[
ltm-interFreqL1-OnlyInBC-r18 ENUMERATED {supported} OPTIONAL
]]
}
MeasAndMobParametersXDD-Diff ::= SEQUENCE {
intraAndInterF-MeasAndReport ENUMERATED {supported} OPTIONAL,
eventA-MeasAndReport ENUMERATED {supported} OPTIONAL,
...,
[[
handoverInterF ENUMERATED {supported} OPTIONAL,
handoverLTE-EPC ENUMERATED {supported} OPTIONAL,
handoverLTE-5GC ENUMERATED {supported} OPTIONAL
]],
[[
sftd-MeasNR-Neigh ENUMERATED {supported} OPTIONAL,
sftd-MeasNR-Neigh-DRX ENUMERATED {supported} OPTIONAL
]],
[[
dummy ENUMERATED {supported} OPTIONAL
]]
}
MeasAndMobParametersFRX-Diff ::= SEQUENCE {
ss-SINR-Meas ENUMERATED {supported} OPTIONAL,
csi-RSRP-AndRSRQ-MeasWithSSB ENUMERATED {supported} OPTIONAL,
csi-RSRP-AndRSRQ-MeasWithoutSSB ENUMERATED {supported} OPTIONAL,
csi-SINR-Meas ENUMERATED {supported} OPTIONAL,
csi-RS-RLM ENUMERATED {supported} OPTIONAL,
...,
[[
handoverInterF ENUMERATED {supported} OPTIONAL,
handoverLTE-EPC ENUMERATED {supported} OPTIONAL,
handoverLTE-5GC ENUMERATED {supported} OPTIONAL
]],
[[
maxNumberResource-CSI-RS-RLM ENUMERATED {n2, n4, n6, n8} OPTIONAL
]],
[[
simultaneousRxDataSSB-DiffNumerology ENUMERATED {supported} OPTIONAL
]],
[[
nr-AutonomousGaps-r16 ENUMERATED {supported} OPTIONAL,
nr-AutonomousGaps-ENDC-r16 ENUMERATED {supported} OPTIONAL,
nr-AutonomousGaps-NEDC-r16 ENUMERATED {supported} OPTIONAL,
nr-AutonomousGaps-NRDC-r16 ENUMERATED {supported} OPTIONAL,
dummy ENUMERATED {supported} OPTIONAL,
cli-RSSI-Meas-r16 ENUMERATED {supported} OPTIONAL,
cli-SRS-RSRP-Meas-r16 ENUMERATED {supported} OPTIONAL,
interFrequencyMeas-NoGap-r16 ENUMERATED {supported} OPTIONAL,
simultaneousRxDataSSB-DiffNumerology-Inter-r16 ENUMERATED {supported} OPTIONAL,
idleInactiveNR-MeasReport-r16 ENUMERATED {supported} OPTIONAL,
-- R4 6-2: Support of beam level Early Measurement Reporting
idleInactiveNR-MeasBeamReport-r16 ENUMERATED {supported} OPTIONAL
]],
[[
increasedNumberofCSIRSPerMO-r16 ENUMERATED {supported} OPTIONAL
]]
}
MeasAndMobParametersFR2-2-r17 ::= SEQUENCE {
handoverInterF-r17 ENUMERATED {supported} OPTIONAL,
handoverLTE-EPC-r17 ENUMERATED {supported} OPTIONAL,
handoverLTE-5GC-r17 ENUMERATED {supported} OPTIONAL,
idleInactiveNR-MeasReport-r17 ENUMERATED {supported} OPTIONAL,
...
}
-- TAG-MEASANDMOBPARAMETERS-STOP
-- ASN1STOP
– MeasAndMobParametersMRDC
The IE MeasAndMobParametersMRDC is used to convey capability parameters related to RRM measurements and RRC mobility.
MeasAndMobParametersMRDC information element
-- ASN1START
-- TAG-MEASANDMOBPARAMETERSMRDC-START
MeasAndMobParametersMRDC ::= SEQUENCE {
measAndMobParametersMRDC-Common MeasAndMobParametersMRDC-Common OPTIONAL,
measAndMobParametersMRDC-XDD-Diff MeasAndMobParametersMRDC-XDD-Diff OPTIONAL,
measAndMobParametersMRDC-FRX-Diff MeasAndMobParametersMRDC-FRX-Diff OPTIONAL
}
MeasAndMobParametersMRDC-v1560 ::= SEQUENCE {
measAndMobParametersMRDC-XDD-Diff-v1560 MeasAndMobParametersMRDC-XDD-Diff-v1560 OPTIONAL
}
MeasAndMobParametersMRDC-v1610 ::= SEQUENCE {
measAndMobParametersMRDC-Common-v1610 MeasAndMobParametersMRDC-Common-v1610 OPTIONAL,
interNR-MeasEUTRA-IAB-r16 ENUMERATED {supported} OPTIONAL
}
MeasAndMobParametersMRDC-v1700 ::= SEQUENCE {
measAndMobParametersMRDC-Common-v1700 MeasAndMobParametersMRDC-Common-v1700 OPTIONAL
}
MeasAndMobParametersMRDC-v1730 ::= SEQUENCE {
measAndMobParametersMRDC-Common-v1730 MeasAndMobParametersMRDC-Common-v1730 OPTIONAL
}
MeasAndMobParametersMRDC-v1810 ::= SEQUENCE {
measAndMobParametersMRDC-Common-v1810 MeasAndMobParametersMRDC-Common-v1810 OPTIONAL
}
MeasAndMobParametersMRDC-Common ::= SEQUENCE {
independentGapConfig ENUMERATED {supported} OPTIONAL
}
MeasAndMobParametersMRDC-Common-v1610 ::= SEQUENCE {
condPSCellChangeParametersCommon-r16 SEQUENCE {
condPSCellChangeFDD-TDD-r16 ENUMERATED {supported} OPTIONAL,
condPSCellChangeFR1-FR2-r16 ENUMERATED {supported} OPTIONAL
} OPTIONAL,
pscellT312-r16 ENUMERATED {supported} OPTIONAL
}
MeasAndMobParametersMRDC-Common-v1700 ::= SEQUENCE {
condPSCellChangeParameters-r17 SEQUENCE {
inter-SN-condPSCellChangeFDD-TDD-NRDC-r17 ENUMERATED {supported} OPTIONAL,
inter-SN-condPSCellChangeFR1-FR2-NRDC-r17 ENUMERATED {supported} OPTIONAL,
inter-SN-condPSCellChangeFDD-TDD-ENDC-r17 ENUMERATED {supported} OPTIONAL,
inter-SN-condPSCellChangeFR1-FR2-ENDC-r17 ENUMERATED {supported} OPTIONAL,
mn-InitiatedCondPSCellChange-FR1FDD-ENDC-r17 ENUMERATED {supported} OPTIONAL,
mn-InitiatedCondPSCellChange-FR1TDD-ENDC-r17 ENUMERATED {supported} OPTIONAL,
mn-InitiatedCondPSCellChange-FR2TDD-ENDC-r17 ENUMERATED {supported} OPTIONAL,
sn-InitiatedCondPSCellChange-FR1FDD-ENDC-r17 ENUMERATED {supported} OPTIONAL,
sn-InitiatedCondPSCellChange-FR1TDD-ENDC-r17 ENUMERATED {supported} OPTIONAL,
sn-InitiatedCondPSCellChange-FR2TDD-ENDC-r17 ENUMERATED {supported} OPTIONAL
} OPTIONAL,
condHandoverWithSCG-ENDC-r17 ENUMERATED {supported} OPTIONAL,
condHandoverWithSCG-NEDC-r17 ENUMERATED {supported} OPTIONAL
}
MeasAndMobParametersMRDC-Common-v1730 ::= SEQUENCE {
independentGapConfig-maxCC-r17 SEQUENCE {
fr1-Only-r17 INTEGER (1..32) OPTIONAL,
fr2-Only-r17 INTEGER (1..32) OPTIONAL,
fr1-AndFR2-r17 INTEGER (1..32) OPTIONAL
}
}
MeasAndMobParametersMRDC-Common-v1810 ::= SEQUENCE {
mn-ConfiguredMN-TriggerSCPAC-r18 ENUMERATED {supported} OPTIONAL,
mn-ConfiguredSN-TriggerSCPAC-r18 ENUMERATED {supported} OPTIONAL,
sn-ConfiguredSCPAC-r18 ENUMERATED {supported} OPTIONAL,
mn-ConfiguredMN-TriggerSCPAC-afterSCG-release-r18 ENUMERATED {supported} OPTIONAL,
mn-ConfiguredReferenceConfigSCPAC-r18 ENUMERATED {supported} OPTIONAL,
sn-ConfiguredReferenceConfigSCPAC-r18 ENUMERATED {supported} OPTIONAL,
condHandoverWithCandSCG-Addition-r18 ENUMERATED {supported} OPTIONAL,
condHandoverWithCandSCG-FR1-FR2-Change-r18 ENUMERATED {supported} OPTIONAL,
condHandoverWithCandSCG-FDD-TDD-Change-r18 ENUMERATED {supported} OPTIONAL
}
MeasAndMobParametersMRDC-XDD-Diff ::= SEQUENCE {
sftd-MeasPSCell ENUMERATED {supported} OPTIONAL,
sftd-MeasNR-Cell ENUMERATED {supported} OPTIONAL
}
MeasAndMobParametersMRDC-XDD-Diff-v1560 ::= SEQUENCE {
sftd-MeasPSCell-NEDC ENUMERATED {supported} OPTIONAL
}
MeasAndMobParametersMRDC-FRX-Diff ::= SEQUENCE {
simultaneousRxDataSSB-DiffNumerology ENUMERATED {supported} OPTIONAL
}
-- TAG-MEASANDMOBPARAMETERSMRDC-STOP
-- ASN1STOP
– MIMO-Layers
The IE MIMO-Layers is used to convey the number of supported MIMO layers.
MIMO-Layers information element
-- ASN1START
-- TAG-MIMO-LAYERS-START
MIMO-LayersDL ::= ENUMERATED {twoLayers, fourLayers, eightLayers}
MIMO-LayersUL ::= ENUMERATED {oneLayer, twoLayers, fourLayers}
-- TAG-MIMO-LAYERS-STOP
-- ASN1STOP
– MIMO-ParametersPerBand
The IE MIMO-ParametersPerBand is used to convey MIMO related parameters specific for a certain band (not per feature set or band combination).
MIMO-ParametersPerBand information element
-- ASN1START
-- TAG-MIMO-PARAMETERSPERBAND-START
MIMO-ParametersPerBand ::= SEQUENCE {
tci-StatePDSCH SEQUENCE {
maxNumberConfiguredTCI-StatesPerCC ENUMERATED {n4, n8, n16, n32, n64, n128} OPTIONAL,
maxNumberActiveTCI-PerBWP ENUMERATED {n1, n2, n4, n8} OPTIONAL
} OPTIONAL,
additionalActiveTCI-StatePDCCH ENUMERATED {supported} OPTIONAL,
pusch-TransCoherence ENUMERATED {nonCoherent, partialCoherent, fullCoherent} OPTIONAL,
beamCorrespondenceWithoutUL-BeamSweeping ENUMERATED {supported} OPTIONAL,
periodicBeamReport ENUMERATED {supported} OPTIONAL,
aperiodicBeamReport ENUMERATED {supported} OPTIONAL,
sp-BeamReportPUCCH ENUMERATED {supported} OPTIONAL,
sp-BeamReportPUSCH ENUMERATED {supported} OPTIONAL,
dummy1 DummyG OPTIONAL,
maxNumberRxBeam INTEGER (2..8) OPTIONAL,
maxNumberRxTxBeamSwitchDL SEQUENCE {
scs-15kHz ENUMERATED {n4, n7, n14} OPTIONAL,
scs-30kHz ENUMERATED {n4, n7, n14} OPTIONAL,
scs-60kHz ENUMERATED {n4, n7, n14} OPTIONAL,
scs-120kHz ENUMERATED {n4, n7, n14} OPTIONAL,
scs-240kHz ENUMERATED {n4, n7, n14} OPTIONAL
} OPTIONAL,
maxNumberNonGroupBeamReporting ENUMERATED {n1, n2, n4} OPTIONAL,
groupBeamReporting ENUMERATED {supported} OPTIONAL,
uplinkBeamManagement SEQUENCE {
maxNumberSRS-ResourcePerSet-BM ENUMERATED {n2, n4, n8, n16},
maxNumberSRS-ResourceSet INTEGER (1..8)
} OPTIONAL,
maxNumberCSI-RS-BFD INTEGER (1..64) OPTIONAL,
maxNumberSSB-BFD INTEGER (1..64) OPTIONAL,
maxNumberCSI-RS-SSB-CBD INTEGER (1..256) OPTIONAL,
dummy2 ENUMERATED {supported} OPTIONAL,
twoPortsPTRS-UL ENUMERATED {supported} OPTIONAL,
dummy5 SRS-Resources OPTIONAL,
dummy3 INTEGER (1..4) OPTIONAL,
beamReportTiming SEQUENCE {
scs-15kHz ENUMERATED {sym2, sym4, sym8} OPTIONAL,
scs-30kHz ENUMERATED {sym4, sym8, sym14, sym28} OPTIONAL,
scs-60kHz ENUMERATED {sym8, sym14, sym28} OPTIONAL,
scs-120kHz ENUMERATED {sym14, sym28, sym56} OPTIONAL
} OPTIONAL,
ptrs-DensityRecommendationSetDL SEQUENCE {
scs-15kHz PTRS-DensityRecommendationDL OPTIONAL,
scs-30kHz PTRS-DensityRecommendationDL OPTIONAL,
scs-60kHz PTRS-DensityRecommendationDL OPTIONAL,
scs-120kHz PTRS-DensityRecommendationDL OPTIONAL
} OPTIONAL,
ptrs-DensityRecommendationSetUL SEQUENCE {
scs-15kHz PTRS-DensityRecommendationUL OPTIONAL,
scs-30kHz PTRS-DensityRecommendationUL OPTIONAL,
scs-60kHz PTRS-DensityRecommendationUL OPTIONAL,
scs-120kHz PTRS-DensityRecommendationUL OPTIONAL
} OPTIONAL,
dummy4 DummyH OPTIONAL,
aperiodicTRS ENUMERATED {supported} OPTIONAL,
...,
[[
dummy6 ENUMERATED {true} OPTIONAL,
beamManagementSSB-CSI-RS BeamManagementSSB-CSI-RS OPTIONAL,
beamSwitchTiming SEQUENCE {
scs-60kHz ENUMERATED {sym14, sym28, sym48, sym224, sym336} OPTIONAL,
scs-120kHz ENUMERATED {sym14, sym28, sym48, sym224, sym336} OPTIONAL
} OPTIONAL,
codebookParameters CodebookParameters OPTIONAL,
csi-RS-IM-ReceptionForFeedback CSI-RS-IM-ReceptionForFeedback OPTIONAL,
csi-RS-ProcFrameworkForSRS CSI-RS-ProcFrameworkForSRS OPTIONAL,
csi-ReportFramework CSI-ReportFramework OPTIONAL,
csi-RS-ForTracking CSI-RS-ForTracking OPTIONAL,
srs-AssocCSI-RS SEQUENCE (SIZE (1.. maxNrofCSI-RS-Resources)) OF SupportedCSI-RS-Resource OPTIONAL,
spatialRelations SpatialRelations OPTIONAL
]],
[[
-- R1 16-2b-0: Support of default QCL assumption with two TCI states
defaultQCL-TwoTCI-r16 ENUMERATED {supported} OPTIONAL,
codebookParametersPerBand-r16 CodebookParameters-v1610 OPTIONAL,
-- R1 16-1b-3: Support of PUCCH resource groups per BWP for simultaneous spatial relation update
simul-SpatialRelationUpdatePUCCHResGroup-r16 ENUMERATED {supported} OPTIONAL,
-- R1 16-1f: Maximum number of SCells configured for SCell beam failure recovery simultaneously
maxNumberSCellBFR-r16 ENUMERATED {n1,n2,n4,n8} OPTIONAL,
-- R1 16-2c: Supports simultaneous reception with different Type-D for FR2 only
simultaneousReceptionDiffTypeD-r16 ENUMERATED {supported} OPTIONAL,
-- R1 16-1a-1: SSB/CSI-RS for L1-SINR measurement
ssb-csirs-SINR-measurement-r16 SEQUENCE {
maxNumberSSB-CSIRS-OneTx-CMR-r16 ENUMERATED {n8, n16, n32, n64},
maxNumberCSI-IM-NZP-IMR-res-r16 ENUMERATED {n8, n16, n32, n64},
maxNumberCSIRS-2Tx-res-r16 ENUMERATED {n0, n4, n8, n16, n32, n64},
maxNumberSSB-CSIRS-res-r16 ENUMERATED {n8, n16, n32, n64, n128},
maxNumberCSI-IM-NZP-IMR-res-mem-r16 ENUMERATED {n8, n16, n32, n64, n128},
supportedCSI-RS-Density-CMR-r16 ENUMERATED {one, three, oneAndThree},
maxNumberAperiodicCSI-RS-Res-r16 ENUMERATED {n2, n4, n8, n16, n32, n64},
supportedSINR-meas-r16 ENUMERATED {ssbWithCSI-IM, ssbWithNZP-IMR, csirsWithNZP-IMR, csi-RSWithoutIMR} OPTIONAL
} OPTIONAL,
-- R1 16-1a-2: Non-group based L1-SINR reporting
nonGroupSINR-reporting-r16 ENUMERATED {n1, n2, n4} OPTIONAL,
-- R1 16-1a-3: Non-group based L1-SINR reporting
groupSINR-reporting-r16 ENUMERATED {supported} OPTIONAL,
multiDCI-multiTRP-Parameters-r16 SEQUENCE {
-- R1 16-2a-0: Overlapping PDSCHs in time and fully overlapping in frequency and time
overlapPDSCHsFullyFreqTime-r16 INTEGER (1..2) OPTIONAL,
-- R1 16-2a-1: Overlapping PDSCHs in time and partially overlapping in frequency and time
overlapPDSCHsInTimePartiallyFreq-r16 ENUMERATED {supported} OPTIONAL,
-- R1 16-2a-2: Out of order operation for DL
outOfOrderOperationDL-r16 SEQUENCE {
supportPDCCH-ToPDSCH-r16 ENUMERATED {supported} OPTIONAL,
supportPDSCH-ToHARQ-ACK-r16 ENUMERATED {supported} OPTIONAL
} OPTIONAL,
-- R1 16-2a-3: Out of order operation for UL
outOfOrderOperationUL-r16 ENUMERATED {supported} OPTIONAL,
-- R1 16-2a-5: Separate CRS rate matching
separateCRS-RateMatching-r16 ENUMERATED {supported} OPTIONAL,
-- R1 16-2a-6: Default QCL enhancement for multi-DCI based multi-TRP
defaultQCL-PerCORESETPoolIndex-r16 ENUMERATED {supported} OPTIONAL,
-- R1 16-2a-7: Maximum number of activated TCI states
maxNumberActivatedTCI-States-r16 SEQUENCE {
maxNumberPerCORESET-Pool-r16 ENUMERATED {n1, n2, n4, n8},
maxTotalNumberAcrossCORESET-Pool-r16 ENUMERATED {n2, n4, n8, n16}
} OPTIONAL
} OPTIONAL,
singleDCI-SDM-scheme-Parameters-r16 SEQUENCE {
-- R1 16-2b-1b: Single-DCI based SDM scheme - Support of new DMRS port entry
supportNewDMRS-Port-r16 ENUMERATED {supported1, supported2, supported3} OPTIONAL,
-- R1 16-2b-1a: Support of s-port DL PTRS
supportTwoPortDL-PTRS-r16 ENUMERATED {supported} OPTIONAL
} OPTIONAL,
-- R1 16-2b-2: Support of single-DCI based FDMSchemeA
supportFDM-SchemeA-r16 ENUMERATED {supported} OPTIONAL,
-- R1 16-2b-3a: Single-DCI based FDMSchemeB CW soft combining
supportCodeWordSoftCombining-r16 ENUMERATED {supported} OPTIONAL,
-- R1 16-2b-4: Single-DCI based TDMSchemeA
supportTDM-SchemeA-r16 ENUMERATED {kb3, kb5, kb10, kb20, noRestriction} OPTIONAL,
-- R1 16-2b-5: Single-DCI based inter-slot TDM
supportInter-slotTDM-r16 SEQUENCE {
supportRepNumPDSCH-TDRA-r16 ENUMERATED {n2, n3, n4, n5, n6, n7, n8, n16},
maxTBS-Size-r16 ENUMERATED {kb3, kb5, kb10, kb20, noRestriction},
maxNumberTCI-states-r16 INTEGER (1..2)
} OPTIONAL,
-- R1 16-4: Low PAPR DMRS for PDSCH
lowPAPR-DMRS-PDSCH-r16 ENUMERATED {supported} OPTIONAL,
-- R1 16-6a: Low PAPR DMRS for PUSCH without transform precoding
lowPAPR-DMRS-PUSCHwithoutPrecoding-r16 ENUMERATED {supported} OPTIONAL,
-- R1 16-6b: Low PAPR DMRS for PUCCH
lowPAPR-DMRS-PUCCH-r16 ENUMERATED {supported} OPTIONAL,
-- R1 16-6c: Low PAPR DMRS for PUSCH with transform precoding & pi/2 BPSK
lowPAPR-DMRS-PUSCHwithPrecoding-r16 ENUMERATED {supported} OPTIONAL,
-- R1 16-7: Extension of the maximum number of configured aperiodic CSI report settings
csi-ReportFrameworkExt-r16 CSI-ReportFrameworkExt-r16 OPTIONAL,
-- R1 16-3a, 16-3a-1, 16-3b, 16-3b-1, 16-8: Individual new codebook types
codebookParametersAddition-r16 CodebookParametersAddition-r16 OPTIONAL,
-- R1 16-8: Mixed codebook types
codebookComboParametersAddition-r16 CodebookComboParametersAddition-r16 OPTIONAL,
-- R4 8-2: SSB based beam correspondence
beamCorrespondenceSSB-based-r16 ENUMERATED {supported} OPTIONAL,
-- R4 8-3: CSI-RS based beam correspondence
beamCorrespondenceCSI-RS-based-r16 ENUMERATED {supported} OPTIONAL,
beamSwitchTiming-r16 SEQUENCE {
scs-60kHz-r16 ENUMERATED {sym224, sym336} OPTIONAL,
scs-120kHz-r16 ENUMERATED {sym224, sym336} OPTIONAL
} OPTIONAL
]],
[[
-- R1 16-1a-4: Semi-persistent L1-SINR report on PUCCH
semi-PersistentL1-SINR-Report-PUCCH-r16 SEQUENCE {
supportReportFormat1-2OFDM-syms-r16 ENUMERATED {supported} OPTIONAL,
supportReportFormat4-14OFDM-syms-r16 ENUMERATED {supported} OPTIONAL
} OPTIONAL,
-- R1 16-1a-5: Semi-persistent L1-SINR report on PUSCH
semi-PersistentL1-SINR-Report-PUSCH-r16 ENUMERATED {supported} OPTIONAL
]],
[[
-- R1 16-1h: Support of 64 configured PUCCH spatial relations
spatialRelations-v1640 SEQUENCE {
maxNumberConfiguredSpatialRelations-v1640 ENUMERATED {n96, n128, n160, n192, n224, n256, n288, n320}
} OPTIONAL,
-- R1 16-1i: Support of 64 configured candidate beam RSs for BFR
support64CandidateBeamRS-BFR-r16 ENUMERATED {supported} OPTIONAL
]],
[[
-- R1 16-2a-9: Interpretation of maxNumberMIMO-LayersPDSCH for multi-DCI based mTRP
maxMIMO-LayersForMulti-DCI-mTRP-r16 ENUMERATED {supported} OPTIONAL
]],
[[
supportedSINR-meas-v1670 BIT STRING (SIZE (4)) OPTIONAL
]],
[[
-- R1 23-8-5 Increased repetition for SRS
srs-increasedRepetition-r17 ENUMERATED {supported} OPTIONAL,
-- R1 23-8-6 Partial frequency sounding of SRS
srs-partialFrequencySounding-r17 ENUMERATED {supported} OPTIONAL,
-- R1 23-8-7 Start RB location hopping for partial frequency SRS
srs-startRB-locationHoppingPartial-r17 ENUMERATED {supported} OPTIONAL,
-- R1 23-8-8 Comb-8 SRS
srs-combEight-r17 ENUMERATED {supported} OPTIONAL,
-- R1 23-9-1 Basic Features of Further Enhanced Port-Selection Type II Codebook (FeType-II) per band information
codebookParametersfetype2-r17 CodebookParametersfetype2-r17 OPTIONAL,
-- R1 23-3-1-2a Two associated CSI-RS resources
mTRP-PUSCH-twoCSI-RS-r17 ENUMERATED {supported} OPTIONAL,
-- R1 23-3-2 Multi-TRP PUCCH repetition scheme 1 (inter-slot)
mTRP-PUCCH-InterSlot-r17 ENUMERATED {pf0-2, pf1-3-4, pf0-4} OPTIONAL,
-- R1 23-3-2b Cyclic mapping for multi-TRP PUCCH repetition
mTRP-PUCCH-CyclicMapping-r17 ENUMERATED {supported} OPTIONAL,
-- R1 23-3-2c Second TPC field for multi-TRP PUCCH repetition
mTRP-PUCCH-SecondTPC-r17 ENUMERATED {supported} OPTIONAL,
-- R1 23-5-2 MTRP BFR based on two BFD-RS set
mTRP-BFR-twoBFD-RS-Set-r17 SEQUENCE {
maxBFD-RS-resourcesPerSetPerBWP-r17 ENUMERATED {n1, n2},
maxBFR-r17 INTEGER (1..9),
maxBFD-RS-resourcesAcrossSetsPerBWP-r17 ENUMERATED {n2, n3, n4}
} OPTIONAL,
-- R1 23-5-2a PUCCH-SR resources for MTRP BFRQ - Max number of PUCCH-SR resources for MTRP BFRQ per cell group
mTRP-BFR-PUCCH-SR-perCG-r17 ENUMERATED{n1, n2} OPTIONAL,
-- R1 23-5-2b Association between a BFD-RS resource set on SpCell and a PUCCH SR resource
mTRP-BFR-association-PUCCH-SR-r17 ENUMERATED {supported} OPTIONAL,
-- R1 23-6-3 Simultaneous activation of two TCI states for PDCCH across multiple CCs (HST/URLLC)
sfn-SimulTwoTCI-AcrossMultiCC-r17 ENUMERATED {supported} OPTIONAL,
-- R1 23-6-4 Default DL beam setup for SFN
sfn-DefaultDL-BeamSetup-r17 ENUMERATED {supported} OPTIONAL,
-- R1 23-6-4a Default UL beam setup for SFN PDCCH(FR2 only)
sfn-DefaultUL-BeamSetup-r17 ENUMERATED {supported} OPTIONAL,
-- R1 23-8-1 SRS triggering offset enhancement
srs-TriggeringOffset-r17 ENUMERATED {n1, n2, n4} OPTIONAL,
-- R1 23-8-2 Triggering SRS only in DCI 0_1/0_2
srs-TriggeringDCI-r17 ENUMERATED {supported} OPTIONAL,
-- R1 23-9-5 Active CSI-RS resources and ports for mixed codebook types in any slot per band information
codebookComboParameterMixedType-r17 CodebookComboParameterMixedType-r17 OPTIONAL,
-- R1 23-1-1 Unified TCI [with joint DL/UL TCI update] for intra-cell beam management
unifiedJointTCI-r17 SEQUENCE{
maxConfiguredJointTCI-r17 ENUMERATED {n8, n12, n16, n24, n32, n48, n64, n128},
maxActivatedTCIAcrossCC-r17 ENUMERATED {n1, n2, n4, n8, n16}
} OPTIONAL,
-- R1 23-1-1b Unified TCI with joint DL/UL TCI update for intra- and inter-cell beam management with more than one MAC-CE
unifiedJointTCI-multiMAC-CE-r17 SEQUENCE{
minBeamApplicationTime-r17 ENUMERATED {n1, n2, n4, n7, n14, n28, n42, n56, n70, n84, n98, n112, n224, n336}
OPTIONAL,
maxNumMAC-CE-PerCC ENUMERATED {n2, n3, n4, n5, n6, n7, n8}
} OPTIONAL,
-- R1 23-1-1d Per BWP TCI state pool configuration for CA mode
unifiedJointTCI-perBWP-CA-r17 ENUMERATED {supported} OPTIONAL,
-- R1 23-1-1e TCI state pool configuration with TCI pool sharing for CA mode
unifiedJointTCI-ListSharingCA-r17 ENUMERATED {n1,n2,n4,n8} OPTIONAL,
-- R1 23-1-1f Common multi-CC TCI state ID update and activation
unifiedJointTCI-commonMultiCC-r17 ENUMERATED {supported} OPTIONAL,
-- R1 23-1-1g Beam misalignment between the DL source RS in the TCI state
unifiedJointTCI-BeamAlignDLRS-r17 ENUMERATED {supported} OPTIONAL,
-- R1 23-1-1h Association between TCI state and UL PC settings for PUCCH, PUSCH, and SRS
unifiedJointTCI-PC-association-r17 ENUMERATED {supported} OPTIONAL,
-- R1 23-1-1i Indication/configuration of R17 TCI states for aperiodic CSI-RS, PDCCH, PDSCH
unifiedJointTCI-Legacy-r17 ENUMERATED {supported} OPTIONAL,
-- 23-1-1m Indication/configuration of R17 TCI states for SRS
unifiedJointTCI-Legacy-SRS-r17 ENUMERATED {supported} OPTIONAL,
-- R1 23-1-1j Indication/configuration of R17 TCI states for CORESET #0
unifiedJointTCI-Legacy-CORESET0-r17 ENUMERATED {supported} OPTIONAL,
-- R1 23-1-1c SCell BFR with unified TCI framework (NOTE; pre-requisite is empty)
unifiedJointTCI-SCellBFR-r17 ENUMERATED {supported} OPTIONAL,
-- R1 23-1-1a Unified TCI with joint DL/UL TCI update for inter-cell beam management
unifiedJointTCI-InterCell-r17 SEQUENCE{
additionalMAC-CE-PerCC-r17 ENUMERATED {n0, n1, n2, n4},
additionalMAC-CE-AcrossCC-r17 ENUMERATED {n0, n1, n2, n4}
} OPTIONAL,
-- R1 23-10-1 Unified TCI with separate DL/UL TCI update for intra-cell beam management
unifiedSeparateTCI-r17 SEQUENCE{
maxConfiguredDL-TCI-r17 ENUMERATED {n4, n8, n12, n16, n24, n32, n48, n64, n128},
maxConfiguredUL-TCI-r17 ENUMERATED {n4, n8, n12, n16, n24, n32, n48, n64},
maxActivatedDL-TCIAcrossCC-r17 ENUMERATED {n1, n2, n4, n8, n16},
maxActivatedUL-TCIAcrossCC-r17 ENUMERATED {n1, n2, n4, n8, n16}
} OPTIONAL,
-- R1 23-10-1b Unified TCI with separate DL/UL TCI update for intra-cell beam management with more than one MAC-CE
unifiedSeparateTCI-multiMAC-CE-r17 SEQUENCE{
minBeamApplicationTime-r17 ENUMERATED {n1, n2, n4, n7, n14, n28, n42, n56, n70, n84, n98, n112, n224, n336},
maxActivatedDL-TCIPerCC-r17 INTEGER (2..8),
maxActivatedUL-TCIPerCC-r17 INTEGER (2..8)
} OPTIONAL,
-- R1 23-10-1d Per BWP DL/UL-TCI state pool configuration for CA mode
unifiedSeparateTCI-perBWP-CA-r17 ENUMERATED {supported} OPTIONAL,
-- R1 23-10-1e TCI state pool configuration with DL/UL-TCI pool sharing for CA mode
unifiedSeparateTCI-ListSharingCA-r17 SEQUENCE {
maxNumListDL-TCI-r17 ENUMERATED {n1,n2,n4,n8} OPTIONAL,
maxNumListUL-TCI-r17 ENUMERATED {n1,n2,n4,n8} OPTIONAL
} OPTIONAL,
-- R1 23-10-1f Common multi-CC DL/UL-TCI state ID update and activation with separate DL/UL TCI update
unifiedSeparateTCI-commonMultiCC-r17 ENUMERATED {supported} OPTIONAL,
-- 23-10-1m Unified TCI with separate DL/UL TCI update for inter-cell beam management with more than one MAC-CE
unifiedSeparateTCI-InterCell-r17 SEQUENCE {
k-DL-PerCC-r17 ENUMERATED {n0, n1, n2, n4},
k-UL-PerCC-r17 ENUMERATED {n0, n1, n2, n4},
k-DL-AcrossCC-r17 ENUMERATED {n0, n1, n2, n4},
k-UL-AcrossCC-r17 ENUMERATED {n0, n1, n2, n4}
} OPTIONAL,
-- R1 23-1-2 Inter-cell beam measurement and reporting (for inter-cell BM and mTRP)
unifiedJointTCI-mTRP-InterCell-BM-r17 SEQUENCE {
maxNumAdditionalPCI-L1-RSRP-r17 INTEGER (1..7),
maxNumSSB-ResourceL1-RSRP-AcrossCC-r17 ENUMERATED {n1,n2,n4,n8}
} OPTIONAL,
-- R1 23-1-3 MPE mitigation
mpe-Mitigation-r17 SEQUENCE {
maxNumP-MPR-RI-pairs-r17 INTEGER (1..4),
maxNumConfRS-r17 ENUMERATED {n1, n2, n4, n8, n12, n16, n28, n32, n48, n64}
} OPTIONAL,
-- R1 23-1-4 UE capability value reporting
srs-PortReport-r17 SEQUENCE {
capVal1-r17 ENUMERATED {n1, n2, n4} OPTIONAL,
capVal2-r17 ENUMERATED {n1, n2, n4} OPTIONAL,
capVal3-r17 ENUMERATED {n1, n2, n4} OPTIONAL,
capVal4-r17 ENUMERATED {n1, n2, n4} OPTIONAL
} OPTIONAL,
-- R1 23-2-1a Monitoring of individual candidates
mTRP-PDCCH-individual-r17 ENUMERATED {supported} OPTIONAL,
-- R1 23-2-1b PDCCH repetition with PDCCH monitoring on any span of up to 3 consecutive OFDM symbols of a slot
mTRP-PDCCH-anySpan-3Symbols-r17 ENUMERATED {supported} OPTIONAL,
-- R1 23-2-2 Two QCL TypeD for CORESET monitoring in PDCCH repetition
mTRP-PDCCH-TwoQCL-TypeD-r17 ENUMERATED {supported} OPTIONAL,
-- R1 23-3-1-2b CSI-RS processing framework for SRS with two associated CSI-RS resources
mTRP-PUSCH-CSI-RS-r17 SEQUENCE {
maxNumPeriodicSRS-r17 INTEGER (1..8),
maxNumAperiodicSRS-r17 INTEGER (1..8),
maxNumSP-SRS-r17 INTEGER (0..8),
numSRS-ResourcePerCC-r17 INTEGER (1..16),
numSRS-ResourceNonCodebook-r17 INTEGER (1..2)
} OPTIONAL,
-- R1 23-3-1a Cyclic mapping for Multi-TRP PUSCH repetition
mTRP-PUSCH-cyclicMapping-r17 ENUMERATED {typeA,typeB,both} OPTIONAL,
-- R1 23-3-1b Second TPC field for Multi-TRP PUSCH repetition
mTRP-PUSCH-secondTPC-r17 ENUMERATED {supported} OPTIONAL,
-- R1 23-3-1c Two PHR reporting
mTRP-PUSCH-twoPHR-Reporting-r17 ENUMERATED {supported} OPTIONAL,
-- R1 23-3-1e A-CSI report
mTRP-PUSCH-A-CSI-r17 ENUMERATED {supported} OPTIONAL,
-- R1 23-3-1f SP-CSI report
mTRP-PUSCH-SP-CSI-r17 ENUMERATED {supported} OPTIONAL,
-- R1 23-3-1g CG PUSCH transmission
mTRP-PUSCH-CG-r17 ENUMERATED {supported} OPTIONAL,
-- R1 23-3-2d Updating two Spatial relation or two sets of power control parameters for PUCCH group
mTRP-PUCCH-MAC-CE-r17 ENUMERATED {supported} OPTIONAL,
-- R1 23-3-2e Maximum number of power control parameter sets configured for multi-TRP PUCCH repetition in FR1
mTRP-PUCCH-maxNum-PC-FR1-r17 INTEGER (3..8) OPTIONAL,
-- R1 23-4 IntCell-mTRP
mTRP-inter-Cell-r17 SEQUENCE {
maxNumAdditionalPCI-Case1-r17 INTEGER (1..7),
maxNumAdditionalPCI-Case2-r17 INTEGER (0..7)
} OPTIONAL,
-- R1 23-5-1 Group based L1-RSRP reporting enhancements
mTRP-GroupBasedL1-RSRP-r17 SEQUENCE {
maxNumBeamGroups-r17 INTEGER (1..4),
maxNumRS-WithinSlot-r17 ENUMERATED {n2,n3,n4,n8,n16,n32,n64},
maxNumRS-AcrossSlot-r17 ENUMERATED {n8, n16, n32, n64, n128}
} OPTIONAL,
-- R1 23-5-2c MAC-CE based update of explicit BFD-RS mTRP-PUCCH-IntraSlot-r17 => per band
mTRP-BFD-RS-MAC-CE-r17 ENUMERATED {n4, n8, n12, n16, n32, n48, n64 } OPTIONAL,
-- R1 23-7-1 Basic Features of CSI Enhancement for Multi-TRP
mTRP-CSI-EnhancementPerBand-r17 SEQUENCE {
maxNumNZP-CSI-RS-r17 INTEGER (2..8),
cSI-Report-mode-r17 ENUMERATED {mode1, mode2, both},
supportedComboAcrossCCs-r17 SEQUENCE (SIZE (1..16)) OF CSI-MultiTRP-SupportedCombinations-r17,
codebookModeNCJT-r17 ENUMERATED{mode1,mode1And2}
} OPTIONAL,
-- R1 23-7-1b Active CSI-RS resources and ports in the presence of multi-TRP CSI
codebookComboParameterMultiTRP-r17 CodebookComboParameterMultiTRP-r17 OPTIONAL,
-- R1 23-7-1a Additional CSI report mode 1
mTRP-CSI-additionalCSI-r17 ENUMERATED{x1,x2} OPTIONAL,
-- R1 23-7-4 Support of Nmax=2 for Multi-TRP CSI
mTRP-CSI-N-Max2-r17 ENUMERATED {supported} OPTIONAL,
-- R1 23-7-5 CMR sharing
mTRP-CSI-CMR-r17 ENUMERATED {supported} OPTIONAL,
-- R1 23-8-11 Partial frequency sounding of SRS for non-frequency hopping case
srs-partialFreqSounding-r17 ENUMERATED {supported} OPTIONAL,
-- R1-24 feature: Extend beamSwitchTiming for FR2-2
beamSwitchTiming-v1710 SEQUENCE {
scs-480kHz ENUMERATED {sym56, sym112, sym192, sym896, sym1344} OPTIONAL,
scs-960kHz ENUMERATED {sym112, sym224, sym384, sym1792, sym2688} OPTIONAL
} OPTIONAL,
-- R1-24 feature: Extend beamSwitchTiming-r16 for FR2-2
beamSwitchTiming-r17 SEQUENCE {
scs-480kHz-r17 ENUMERATED {sym896, sym1344} OPTIONAL,
scs-960kHz-r17 ENUMERATED {sym1792, sym2688} OPTIONAL
} OPTIONAL,
-- R1-24 feature: Extend beamReportTiming for FR2-2
beamReportTiming-v1710 SEQUENCE {
scs-480kHz-r17 ENUMERATED {sym56, sym112, sym224} OPTIONAL,
scs-960kHz-r17 ENUMERATED {sym112, sym224, sym448} OPTIONAL
} OPTIONAL,
-- R1-24 feature: Extend maximum number of RX/TX beam switch DL for FR2-2
maxNumberRxTxBeamSwitchDL-v1710 SEQUENCE {
scs-480kHz-r17 ENUMERATED {n2, n4, n7} OPTIONAL,
scs-960kHz-r17 ENUMERATED {n1, n2, n4, n7} OPTIONAL
} OPTIONAL
]],
[[
-- R1-23-1-4a: Semi-persistent/aperiodic capability value report
srs-PortReportSP-AP-r17 ENUMERATED {supported} OPTIONAL,
maxNumberRxBeam-v1720 INTEGER (9..12) OPTIONAL,
-- R1-23-6-5 Support implicit configuration of RS(s) with two TCI states for beam failure detection
sfn-ImplicitRS-twoTCI-r17 ENUMERATED {supported} OPTIONAL,
-- R1-23-6-6 QCL-TypeD collision handling with CORESET with 2 TCI states
sfn-QCL-TypeD-Collision-twoTCI-r17 ENUMERATED {supported} OPTIONAL,
-- R1-23-7-1c Basic Features of CSI Enhancement for Multi-TRP - number of CPUs
mTRP-CSI-numCPU-r17 ENUMERATED {n2, n3, n4} OPTIONAL
]],
[[
supportRepNumPDSCH-TDRA-DCI-1-2-r17 ENUMERATED {n2, n3, n4, n5, n6, n7, n8, n16} OPTIONAL
]],
[[
codebookParametersetype2DopplerCSI-r18 CodebookParametersetype2DopplerCSI-r18 OPTIONAL,
codebookParametersfetype2DopplerCSI-r18 CodebookParametersfetype2DopplerCSI-r18 OPTIONAL,
codebookParametersetype2CJT-r18 CodebookParametersetype2CJT-r18 OPTIONAL,
codebookParametersfetype2CJT-r18 CodebookParametersfetype2CJT-r18 OPTIONAL,
codebookComboParametersCJT-r18 CodebookComboParametersCJT-r18 OPTIONAL,
codebookParametersHARQ-ACK-PUSCH-r18 CodebookParametersHARQ-ACK-PUSCH-r18 OPTIONAL,
-- R1 40-1-1: Unified TCI with joint DL/UL TCI update for single-DCI based intra-cell multi-TRP with single activated TCI
-- codepoint per CC
tci-JointTCI-UpdateSingleActiveTCI-PerCC-r18 SEQUENCE {
maxNumberConfigJointTCIPerCC-PerBWP-r18 ENUMERATED {n8,n12,n16,n24,n32,n48,n64,n128},
maxNumberActiveJointTCI-AcrossCC-r18 ENUMERATED {n2,n4,n6,n8,n16,n32}
} OPTIONAL,
-- R1 40-1-1a: Unified TCI with joint DL/UL TCI update for single-DCI based intra-cell multi-TRP with multiple activated TCI
-- codepoints per CC
tci-JointTCI-UpdateMultiActiveTCI-PerCC-r18 SEQUENCE {
tci-StateInd-r18 ENUMERATED {withAssignment, withoutAssignment},
maxNumberActiveJointTCI-PerCC-r18 INTEGER (2..8)
} OPTIONAL,
-- R1 40-1-1c: DCI format 1_1 and if supported 1_2 configured with TCI selection field
tci-SelectionDCI-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-1-2: Unified TCI with separate DL/UL TCI update for single-DCI based intra-cell multi-TRP with single activated TCI
-- codepoint per CC
tci-SeparateTCI-UpdateSingleActiveTCI-PerCC-r18 SEQUENCE {
maxNumConfigDL-TCI-PerCC-PerBWP-r18 ENUMERATED {n4, n8, n12, n16, n24, n32, n48, n64, n128},
maxNumConfigUL-TCI-PerCC-PerBWP-r18 ENUMERATED {n4, n8, n12, n16, n24, n32, n48, n64},
maxNumActiveDL-TCI-AcrossCC-r18 ENUMERATED {n2, n4, n8, n16},
maxNumActiveUL-TCI-AcrossCC-r18 ENUMERATED {n2, n4, n8, n16}
} OPTIONAL,
-- R1 40-1-2a: Unified TCI with separate DL/UL TCI update for single-DCI based intra-cell multi-TRP with multiple
-- activated TCI codepoints per CC
tci-SeparateTCI-UpdateMultiActiveTCI-PerCC-r18 SEQUENCE {
maxNumActiveDL-TCI-AcrossCC-r18 ENUMERATED {n2, n4, n8, n16},
maxNumActiveUL-TCI-AcrossCC-r18 ENUMERATED {n2, n4, n8, n16}
} OPTIONAL,
-- R1 40-1-3: Per aperiodic CSI-RS resource/resource set configuration for TCI selection in S-DCI based MTRP
tci-SelectionAperiodicCSI-RS-r18 ENUMERATED {perResource, perResourceSet, both} OPTIONAL,
-- R1 40-1-3a: Per aperiodic CSI-RS resource/resource set configuration for TCI selection in M-DCI based MTRP
tci-SelectionAperiodicCSI-RS-M-DCI-r18 ENUMERATED {perResource, perResourceSet, both} OPTIONAL,
-- R1 40-1-4: Two TCI states for CJT Tx scheme for PDSCH
twoTCI-StatePDSCH-CJT-TxScheme-r18 ENUMERATED {cjtSchemeA, cjtSchemeB, both} OPTIONAL,
-- R1 40-1-7: Unified TCI with joint DL/UL TCI update for multi-DCI based multi-TRP with single activated TCI
-- codepoint per CORESETPoolIndex per CC
tci-JointTCI-UpdateSingleActiveTCI-PerCC-PerCORESET-r18 SEQUENCE {
mTRP-Operation-r18 ENUMERATED {intraCell, intraCellAndInterCell},
maxNumberConfigJointTCIPerCC-PerBWP-r18 ENUMERATED {n8,n12,n16,n24,n32,n48,n64,n128},
maxNumberActiveJointTCIAcrossCC-PerCORESET-r18 ENUMERATED {n1,n2,n4,n8,n16}
} OPTIONAL,
-- R1 40-1-7a: Unified TCI with joint DL/UL TCI update for multi-DCI based multi-TRP with multiple activated TCI
-- codepoints per CORESETPoolIndex per CC
tci-JointTCI-UpdateMultiActiveTCI-PerCC-PerCORESET-r18 INTEGER (2..8) OPTIONAL,
-- R1 40-1-8: TRP-specific BFR with unified TCI framework with Unified TCI
tci-TRP-BFR-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-1-9: Unified TCI with separate DL/UL TCI update for multi-DCI based multi-TRP with single activated TCI
-- codepoint per CORESETPoolIndex per CC
tci-SeparateTCI-UpdateSingleActiveTCI-PerCC-PerCORESET-r18 SEQUENCE {
mTRP-Operation-r18 ENUMERATED {intraCell, intraCellAndInterCell},
maxNumConfigDL-TCI-PerCC-PerBWP-r18 ENUMERATED {n8, n12, n16, n24, n32, n48, n64, n128},
maxNumConfigUL-TCI-PerCC-PerBWP-r18 ENUMERATED {n8, n12, n16, n24, n32, n48, n64},
maxNumActiveDL-TCI-AcrossCC-r18 ENUMERATED {n1, n2, n4, n8, n16},
maxNumActiveUL-TCI-AcrossCC-r18 ENUMERATED {n1, n2, n4, n8, n16}
} OPTIONAL,
-- R1 40-1-9a: Unified TCI with separate DL/UL TCI update for multi-DCI based multi-TRP with multiple activated TCI
-- codepoints per CORESETPoolIndex per CC
tci-SeparateTCI-UpdateMultiActiveTCI-PerCC-PerCORESET-r18 SEQUENCE {
maxNumConfigDL-TCI-PerCC-PerBWP-r18 INTEGER (1..8),
maxNumConfigUL-TCI-PerCC-PerBWP-r18 INTEGER (1..8)
} OPTIONAL,
-- R1 40-1-12: Common multi-CC TCI state ID update and activation for single-DCI based multi-TRP
commonTCI-SingleDCI-r18 INTEGER (1..4) OPTIONAL,
-- R1 40-1-13: Common multi-CC TCI state ID update and activation for multi-DCI based multi-TRP
commonTCI-MultiDCI-r18 INTEGER (1..4) OPTIONAL,
-- R1 40-1-14: Two PHR reporting for STx2P
twoPHR-Reporting-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-2-3: TAG ID indication via absolute TA command MAC CE
spCell-TAG-Ind-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-2-4: PDCCH order sent by one TRP triggers RACH procedure (specifically PRACH) towards a different TRP based on CFRA for
-- inter-cell
interCellCrossTRP-PDCCH-OrderCFRA-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-2-4a: PDCCH order sent by one TRP triggers RACH procedure (specifically PRACH) towards a different TRP based on CFRA for
-- intra-cell
intraCellCrossTRP-PDCCH-OrderCFRA-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-2-9: Overlapping UL transmission reduction
overlapUL-TransReduction-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-3-2-12: Supported maximum periodicity of CMR when configured as periodic CSI-RS
maxPeriodicityCMR-r18 ENUMERATED {sl4, sl5, sl8, sl10, sl20} OPTIONAL,
-- R1 40-3-3-1: TDCP (Time Domain Channel Properties) report
tdcp-Report-r18 SEQUENCE {
valueX-r18 INTEGER (1..2),
maxNumberActiveResource-r18 INTEGER (2..32)
} OPTIONAL,
-- R1 40-3-3-5: Number of CSI-RS resources for TDCP
tdcp-Resource-r18 SEQUENCE {
maxNumberConfigPerCC-r18 ENUMERATED {n2,n4,n6,n8,n10,n12},
maxNumberConfigAcrossCC-r18 INTEGER (1..32),
maxNumberSimultaneousPerCC-r18 ENUMERATED {n2, n4, n6, n8, n12, n16, n20, n24, n28, n32}
} OPTIONAL,
-- R1 40-3-1-24: Timeline for regular eType-II-CJT CSI, or for port selection FeType-II-CJT CSI
timelineRelax-CJT-CSI-r18 ENUMERATED {n0,n2} OPTIONAL,
-- R1 40-4-11: Joint configuration of Rel.18 DMRS ports and Rel.18 dynamic switching between DFT-S-OFDM and CP-OFDM for PUSCH
jointConfigDMRSPortDynamicSwitching-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-5-1: SRS comb offset hopping
srs-combOffsetHopping-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-5-1a: Comb offset hopping time-domain behavior when repetition factor R>1
srs-combOffsetInTime-r18 ENUMERATED {srs, rsrs, both} OPTIONAL,
-- R1 40-5-1b: SRS comb offset hopping combined with group/sequence hopping
srs-combOffsetCombinedGroupSequence-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-5-1c: Comb offset hopping within a subset
srs-combOffsetHoppingWithinSubset-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-5-2: SRS cyclic shift hopping
srs-cyclicShiftHopping-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-5-2a: Smaller cyclic shift granularity for cyclic shift hopping
srs-cyclicShiftHoppingSmallGranularity-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-5-2b: SRS cyclic shift hopping combined with group/sequence hopping
srs-cyclicShiftCombinedGroupSequence-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-5-2c: Cyclic shift hopping within a subset
cyclicShiftHoppingWithinSubset-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-5-3: SRS cyclic shift hopping combined with SRS comb offset hopping
srs-cyclicShiftCombinedCombOffset-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-6-1-1: 2 PTRS ports for single-DCI based STx2P SDM scheme for PUSCH-codebook
pusch-CB-2PTRS-SingleDCI-STx2P-SDM-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-6-1a-1: 2 PTRS ports for single-DCI based STx2P SDM scheme for PUSCH-noncodebook
pusch-NonCB-2PTRS-SingleDCI-STx2P-SDM-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-6-1b: Association between CSI-RS and SRS for noncodebook single-DCI based STx2P SDM scheme for PUSCH
pusch-NonCB-SingleDCI-STx2P-SDM-CSI-RS-SRS-r18 SEQUENCE {
maxNumberPeriodicSRS-Resource-PerBWP-r18 INTEGER (1..8),
maxNumberAperiodicSRS-Resource-PerBWP-r18 INTEGER (1..8),
maxNumberSemiPersistentSRS-ResourcePerBWP-r18 INTEGER (0..8),
valueY-SRS-ResourceAssociate-r18 INTEGER (1..16),
valueX-CSI-RS-ResourceAssociate-r18 INTEGER (1..2)
} OPTIONAL,
-- R1 40-6-3b-1: Associated CSI-RS resources for noncodebook multi-DCI based STx2P PUSCH+PUSCH
twoPUSCH-NonCB-Multi-DCI-STx2P-CSI-RS-Resource-r18 SEQUENCE {
maxNumberPeriodicSRS-r18 INTEGER (1..8),
maxNumberAperiodicSRS-r18 INTEGER (1..8),
maxNumberSemiPersistentSRS-r18 INTEGER (0..8),
simultaneousSRS-PerCC-r18 INTEGER (1..16),
simultaneousCSI-RS-NonCB-r18 INTEGER (1..2)
} OPTIONAL,
-- R1 40-6-1-2: New UL DMRS port entry for single-DCI based SDM scheme for Rel-15 DMRS port and/or Rel-18 DMRS port
dmrs-PortEntrySingleDCI-SDM-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-6-2-1: 2 PTRS ports for single-DCI based STx2P SFN scheme for PUSCH-codebook
pusch-CB-2PTRS-SingleDCI-STx2P-SFN-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-6-2a-1: 2 PTRS ports for single-DCI based STx2P SFN scheme for PUSCH-codebook
pusch-NonCB-2PTRS-SingleDCI-STx2P-SFN-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-6-2b: Association between CSI-RS and SRS for noncodebook single-DCI based STx2P SFN scheme for PUSCH
pusch-NonCB-SingleDCI-STx2P-SFN-CSI-RS-SRS-r18 SEQUENCE {
maxNumberPeriodicSRS-Resource-PerBWP-r18 INTEGER (1..8),
maxNumberAperiodicSRS-Resource-PerBWP-r18 INTEGER (1..8),
maxNumberSemiPersistentSRS-ResourcePerBWP-r18 INTEGER (0..8),
valueY-SRS-ResourceAssociate-r18 INTEGER (1..16),
valueX-CSI-RS-ResourceAssociate-r18 INTEGER (1..2)
} OPTIONAL,
-- R1 40-6-3c: Codebook multi-DCI based STx2P PUSCH+PUSCH - Fully overlapping PUSCHs in time and fully overlapping in frequency
twoPUSCH-CB-MultiDCI-STx2P-FullTimeFullFreqOverlap-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-6-3d: Codebook multi-DCI based STx2P PUSCH+PUSCH - Fully overlapping PUSCHs in time and partially overlapping in frequency
twoPUSCH-CB-MultiDCI-STx2P-FullTimePartialFreqOverlap-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-6-3e: Codebook multi-DCI based STx2P PUSCH+PUSCH - Partially overlapping PUSCHs in time and fully overlapping in frequency
twoPUSCH-CB-MultiDCI-STx2P-PartialTimeFullFreqOverlap-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-6-3f: Codebook multi-DCI based STx2P PUSCH+PUSCH - Partially overlapping PUSCHs in time, partially overlapping in frequency
twoPUSCH-CB-MultiDCI-STx2P-PartialTimePartialFreqOverlap-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-6-3g: Codebook multi-DCI based STx2P PUSCH+PUSCH - Partially overlapping PUSCHs in time, partially or non-overlapping
-- in frequency
twoPUSCH-CB-MultiDCI-STx2P-PartialTimeNonFreqOverlap-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-6-3h: Codebook multi-DCI based STx2P PUSCH+PUSCH for CG+CG
twoPUSCH-CB-MultiDCI-STx2P-CG-CG-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-6-3i: Codebook multi-DCI based STx2P PUSCH+PUSCH for DG+CG
twoPUSCH-CB-MultiDCI-STx2P-CG-DG-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-6-3j: Noncodebook multi-DCI based STx2P PUSCH+PUSCH - Fully overlapping PUSCHs in time and fully overlapping in frequency
twoPUSCH-NonCB-MultiDCI-STx2P-FullTimeFullFreqOverlap-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-6-3k: Noncodebook multi-DCI based STx2P PUSCH+PUSCH - Fully overlapping PUSCHs in time and partially overlapping in
-- frequency
twoPUSCH-NonCB-MultiDCI-STx2P-FullTimePartialFreqOverlap-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-6-3l: Noncodebook multi-DCI based STx2P PUSCH+PUSCH - Partially overlapping PUSCHs in time and fully overlapping in
-- frequency
twoPUSCH-NonCB-MultiDCI-STx2P-PartialTimeFullFreqOverlap-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-6-3m: Noncodebook multi-DCI based STx2P PUSCH+PUSCH - Partially overlapping PUSCHs in time, partially overlapping in
-- frequency
twoPUSCH-NonCB-MultiDCI-STx2P-PartialTimePartialFreqOverlap-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-6-3n: Noncodebook multi-DCI based STx2P PUSCH+PUSCH - Partially overlapping PUSCHs in time, non-overlapping in frequency
twoPUSCH-NonCB-MultiDCI-STx2P-PartialTimeNonFreqOverlap-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-6-3o: Noncodebook multi-DCI based STx2P PUSCH+PUSCH for CG+CG
twoPUSCH-NonCB-MultiDCI-STx2P-CG-CG-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-6-3p: Noncodebook multi-DCI based STx2P PUSCH+PUSCH for DG+CG
twoPUSCH-NonCB-MultiDCI-STx2P-CG-DG-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-6-4a: Dynamic indication of repetition number for SFN scheme for PUCCH
pucch-RepetitionDynamicIndicationSFN-r18 ENUMERATED {supported} OPTIONAL,
-- R1 40-6-5: Support grouped-based beam reporting for STx2P
groupBeamReporting-STx2P-r18 SEQUENCE {
groupL1-RSRP-Reporting-r18 ENUMERATED {jointULandDL, ulOnly, both},
maxNumberBeamGroups-r18 INTEGER (1..4),
maxNumberResWithinSlotAcrossCC-r18 ENUMERATED {n2,n3,n4,n8,n16,n32,n64},
maxNumberResAcrossCC-r18 ENUMERATED {n8,n16,n32,n64,n128}
} OPTIONAL
]],
[[
-- R1 40-4-1k: Simultaneous Configuration of Rel-18 DL DMRS and DCI format 1_3
simulConfigDMRS-DCI-1-3-r18 ENUMERATED {supported} OPTIONAL
]]
}
MIMO-ParametersPerBand-v17b0 ::= SEQUENCE {
-- R1 23-1-1b Unified TCI with joint DL/UL TCI update for intra- and inter-cell beam management with more than one MAC-CE
unifiedJointTCI-multiMAC-CE-v17b0 SEQUENCE{
minBeamApplicationTimeJointTCI-v17b0 CHOICE {
fr1-v17b0 SEQUENCE {
scs-15kHz-v17b0 ENUMERATED {sym1, sym2, sym4, sym7, sym14, sym28, sym42, sym56, sym70} OPTIONAL,
scs-30kHz-v17b0 ENUMERATED {sym1, sym2, sym4, sym7, sym14, sym28, sym42, sym56, sym70} OPTIONAL,
scs-60kHz-v17b0 ENUMERATED {sym1, sym2, sym4, sym7, sym14, sym28, sym42, sym56, sym70} OPTIONAL
},
fr2-v17b0 SEQUENCE {
scs-60kHz-v17b0 ENUMERATED {sym1, sym2, sym4, sym7, sym14, sym28, sym42, sym56, sym70,
sym84, sym98, sym112, sym224, sym336} OPTIONAL,
scs-120kHz-v17b0 ENUMERATED {sym1, sym2, sym4, sym7, sym14, sym28, sym42, sym56, sym70,
sym84, sym98, sym112, sym224, sym336} OPTIONAL
}
},
maxNumMAC-CE-PerCC-v17b0 ENUMERATED {n2, n3, n4, n5, n6, n7, n8}
} OPTIONAL,
-- R1 23-10-1b Unified TCI with separate DL/UL TCI update for intra-cell beam management with more than one MAC-CE
unifiedSeparateTCI-multiMAC-CE-v17b0 SEQUENCE{
minBeamApplicationTimeSeparateTCI-v17b0 CHOICE {
fr1-v17b0 SEQUENCE {
scs-15kHz-v17b0 ENUMERATED {sym1, sym2, sym4, sym7, sym14, sym28, sym42, sym56, sym70} OPTIONAL,
scs-30kHz-v17b0 ENUMERATED {sym1, sym2, sym4, sym7, sym14, sym28, sym42, sym56, sym70} OPTIONAL,
scs-60kHz-v17b0 ENUMERATED {sym1, sym2, sym4, sym7, sym14, sym28, sym42, sym56, sym70} OPTIONAL
},
fr2-v17b0 SEQUENCE {
scs-60kHz-v17b0 ENUMERATED {sym1, sym2, sym4, sym7, sym14, sym28, sym42, sym56, sym70,
sym84, sym98, sym112, sym224, sym336} OPTIONAL,
scs-120kHz-v17b0 ENUMERATED {sym1, sym2, sym4, sym7, sym14, sym28, sym42, sym56, sym70,
sym84, sym98, sym112, sym224, sym336} OPTIONAL
}
},
maxActivatedDL-TCIPerCC-v17b0 INTEGER (2..8),
maxActivatedUL-TCIPerCC-v17b0 INTEGER (2..8)
} OPTIONAL
}
DummyG ::= SEQUENCE {
maxNumberSSB-CSI-RS-ResourceOneTx ENUMERATED {n8, n16, n32, n64},
maxNumberSSB-CSI-RS-ResourceTwoTx ENUMERATED {n0, n4, n8, n16, n32, n64},
supportedCSI-RS-Density ENUMERATED {one, three, oneAndThree}
}
BeamManagementSSB-CSI-RS ::= SEQUENCE {
maxNumberSSB-CSI-RS-ResourceOneTx ENUMERATED {n0, n8, n16, n32, n64},
maxNumberCSI-RS-Resource ENUMERATED {n0, n4, n8, n16, n32, n64},
maxNumberCSI-RS-ResourceTwoTx ENUMERATED {n0, n4, n8, n16, n32, n64},
supportedCSI-RS-Density ENUMERATED {one, three, oneAndThree} OPTIONAL,
maxNumberAperiodicCSI-RS-Resource ENUMERATED {n0, n1, n4, n8, n16, n32, n64}
}
DummyH ::= SEQUENCE {
burstLength INTEGER (1..2),
maxSimultaneousResourceSetsPerCC INTEGER (1..8),
maxConfiguredResourceSetsPerCC INTEGER (1..64),
maxConfiguredResourceSetsAllCC INTEGER (1..128)
}
CSI-RS-ForTracking ::= SEQUENCE {
maxBurstLength INTEGER (1..2),
maxSimultaneousResourceSetsPerCC INTEGER (1..8),
maxConfiguredResourceSetsPerCC INTEGER (1..64),
maxConfiguredResourceSetsAllCC INTEGER (1..256)
}
CSI-RS-IM-ReceptionForFeedback ::= SEQUENCE {
maxConfigNumberNZP-CSI-RS-PerCC INTEGER (1..64),
maxConfigNumberPortsAcrossNZP-CSI-RS-PerCC INTEGER (2..256),
maxConfigNumberCSI-IM-PerCC ENUMERATED {n1, n2, n4, n8, n16, n32},
maxNumberSimultaneousNZP-CSI-RS-PerCC INTEGER (1..64),
totalNumberPortsSimultaneousNZP-CSI-RS-PerCC INTEGER (2..256)
}
CSI-RS-ProcFrameworkForSRS ::= SEQUENCE {
maxNumberPeriodicSRS-AssocCSI-RS-PerBWP INTEGER (1..4),
maxNumberAperiodicSRS-AssocCSI-RS-PerBWP INTEGER (1..4),
maxNumberSP-SRS-AssocCSI-RS-PerBWP INTEGER (0..4),
simultaneousSRS-AssocCSI-RS-PerCC INTEGER (1..8)
}
CSI-ReportFramework ::= SEQUENCE {
maxNumberPeriodicCSI-PerBWP-ForCSI-Report INTEGER (1..4),
maxNumberAperiodicCSI-PerBWP-ForCSI-Report INTEGER (1..4),
maxNumberSemiPersistentCSI-PerBWP-ForCSI-Report INTEGER (0..4),
maxNumberPeriodicCSI-PerBWP-ForBeamReport INTEGER (1..4),
maxNumberAperiodicCSI-PerBWP-ForBeamReport INTEGER (1..4),
maxNumberAperiodicCSI-triggeringStatePerCC ENUMERATED {n3, n7, n15, n31, n63, n128},
maxNumberSemiPersistentCSI-PerBWP-ForBeamReport INTEGER (0..4),
simultaneousCSI-ReportsPerCC INTEGER (1..8)
}
CSI-ReportFrameworkExt-r16 ::= SEQUENCE {
maxNumberAperiodicCSI-PerBWP-ForCSI-ReportExt-r16 INTEGER (5..8)
}
PTRS-DensityRecommendationDL ::= SEQUENCE {
frequencyDensity1 INTEGER (1..276),
frequencyDensity2 INTEGER (1..276),
timeDensity1 INTEGER (0..29),
timeDensity2 INTEGER (0..29),
timeDensity3 INTEGER (0..29)
}
PTRS-DensityRecommendationUL ::= SEQUENCE {
frequencyDensity1 INTEGER (1..276),
frequencyDensity2 INTEGER (1..276),
timeDensity1 INTEGER (0..29),
timeDensity2 INTEGER (0..29),
timeDensity3 INTEGER (0..29),
sampleDensity1 INTEGER (1..276),
sampleDensity2 INTEGER (1..276),
sampleDensity3 INTEGER (1..276),
sampleDensity4 INTEGER (1..276),
sampleDensity5 INTEGER (1..276)
}
SpatialRelations ::= SEQUENCE {
maxNumberConfiguredSpatialRelations ENUMERATED {n4, n8, n16, n32, n64, n96},
maxNumberActiveSpatialRelations ENUMERATED {n1, n2, n4, n8, n14},
additionalActiveSpatialRelationPUCCH ENUMERATED {supported} OPTIONAL,
maxNumberDL-RS-QCL-TypeD ENUMERATED {n1, n2, n4, n8, n14}
}
DummyI ::= SEQUENCE {
supportedSRS-TxPortSwitch ENUMERATED {t1r2, t1r4, t2r4, t1r4-t2r4, tr-equal},
txSwitchImpactToRx ENUMERATED {true} OPTIONAL
}
CSI-MultiTRP-SupportedCombinations-r17 ::= SEQUENCE {
maxNumTx-Ports-r17 ENUMERATED {n2, n4, n8, n12, n16, n24, n32},
maxTotalNumCMR-r17 INTEGER (2..64),
maxTotalNumTx-PortsNZP-CSI-RS-r17 INTEGER (2..256)
}
-- TAG-MIMO-PARAMETERSPERBAND-STOP
-- ASN1STOP
– ModulationOrder
The IE ModulationOrder is used to convey the maximum supported modulation order.
ModulationOrder information element
-- ASN1START
-- TAG-MODULATIONORDER-START
ModulationOrder ::= ENUMERATED {bpsk-halfpi, bpsk, qpsk, qam16, qam64, qam256}
-- TAG-MODULATIONORDER-STOP
-- ASN1STOP
– MRDC-Parameters
The IE MRDC-Parameters contains the band combination parameters specific to MR-DC for a given MR-DC band combination.
MRDC-Parameters information element
-- ASN1START
-- TAG-MRDC-PARAMETERS-START
MRDC-Parameters ::= SEQUENCE {
singleUL-Transmission ENUMERATED {supported} OPTIONAL,
dynamicPowerSharingENDC ENUMERATED {supported} OPTIONAL,
tdm-Pattern ENUMERATED {supported} OPTIONAL,
ul-SharingEUTRA-NR ENUMERATED {tdm, fdm, both} OPTIONAL,
ul-SwitchingTimeEUTRA-NR ENUMERATED {type1, type2} OPTIONAL,
simultaneousRxTxInterBandENDC ENUMERATED {supported} OPTIONAL,
asyncIntraBandENDC ENUMERATED {supported} OPTIONAL,
...,
[[
dualPA-Architecture ENUMERATED {supported} OPTIONAL,
intraBandENDC-Support ENUMERATED {non-contiguous, both} OPTIONAL,
ul-TimingAlignmentEUTRA-NR ENUMERATED {required} OPTIONAL
]]
}
MRDC-Parameters-v1580 ::= SEQUENCE {
dynamicPowerSharingNEDC ENUMERATED {supported} OPTIONAL
}
MRDC-Parameters-v1590 ::= SEQUENCE {
interBandContiguousMRDC ENUMERATED {supported} OPTIONAL
}
MRDC-Parameters-v15g0 ::= SEQUENCE {
simultaneousRxTxInterBandENDCPerBandPair SimultaneousRxTxPerBandPair OPTIONAL
}
MRDC-Parameters-v15n0 ::= SEQUENCE {
intraBandENDC-Support-UL ENUMERATED {non-contiguous, both} OPTIONAL
}
MRDC-Parameters-v1620 ::= SEQUENCE {
maxUplinkDutyCycle-interBandENDC-TDD-PC2-r16 SEQUENCE{
eutra-TDD-Config0-r16 ENUMERATED {n20, n40, n50, n60, n70, n80, n90, n100} OPTIONAL,
eutra-TDD-Config1-r16 ENUMERATED {n20, n40, n50, n60, n70, n80, n90, n100} OPTIONAL,
eutra-TDD-Config2-r16 ENUMERATED {n20, n40, n50, n60, n70, n80, n90, n100} OPTIONAL,
eutra-TDD-Config3-r16 ENUMERATED {n20, n40, n50, n60, n70, n80, n90, n100} OPTIONAL,
eutra-TDD-Config4-r16 ENUMERATED {n20, n40, n50, n60, n70, n80, n90, n100} OPTIONAL,
eutra-TDD-Config5-r16 ENUMERATED {n20, n40, n50, n60, n70, n80, n90, n100} OPTIONAL,
eutra-TDD-Config6-r16 ENUMERATED {n20, n40, n50, n60, n70, n80, n90, n100} OPTIONAL
} OPTIONAL,
-- R1 18-2 Single UL TX operation for TDD PCell in EN-DC
tdm-restrictionTDD-endc-r16 ENUMERATED {supported} OPTIONAL,
-- R1 18-2a Single UL TX operation for FDD PCell in EN-DC
tdm-restrictionFDD-endc-r16 ENUMERATED {supported} OPTIONAL,
-- R1 18-2b Support of HARQ-offset for SUO case1 in EN-DC with LTE TDD PCell for type 1 UE
singleUL-HARQ-offsetTDD-PCell-r16 ENUMERATED {supported} OPTIONAL,
-- R1 18-3 Dual Tx transmission for EN-DC with FDD PCell(TDM pattern for dual Tx UE)
tdm-restrictionDualTX-FDD-endc-r16 ENUMERATED {supported} OPTIONAL
}
MRDC-Parameters-v1630 ::= SEQUENCE {
-- R4 2-20 Maximum uplink duty cycle for FDD+TDD EN-DC power class 2
maxUplinkDutyCycle-interBandENDC-FDD-TDD-PC2-r16 SEQUENCE {
maxUplinkDutyCycle-FDD-TDD-EN-DC1-r16 ENUMERATED {n30, n40, n50, n60, n70, n80, n90, n100} OPTIONAL,
maxUplinkDutyCycle-FDD-TDD-EN-DC2-r16 ENUMERATED {n30, n40, n50, n60, n70, n80, n90, n100} OPTIONAL
} OPTIONAL,
-- R4 2-19 FDD-FDD or TDD-TDD inter-band MR-DC with overlapping or partially overlapping DL spectrum
interBandMRDC-WithOverlapDL-Bands-r16 ENUMERATED {supported} OPTIONAL
}
MRDC-Parameters-v1700 ::= SEQUENCE {
condPSCellAdditionENDC-r17 ENUMERATED {supported} OPTIONAL,
scg-ActivationDeactivationENDC-r17 ENUMERATED {supported} OPTIONAL,
scg-ActivationDeactivationResumeENDC-r17 ENUMERATED {supported} OPTIONAL
}
MRDC-Parameters-v1770 ::= SEQUENCE {
-- R4 26-1: Higher Power Limit CA DC
higherPowerLimitMRDC-r17 ENUMERATED {supported} OPTIONAL
}
MRDC-Parameters-v1790 ::= SEQUENCE {
intraBandENDC-Support-v1790 ENUMERATED {non-contiguous, both} OPTIONAL,
intraBandENDC-Support-UL-v1790 ENUMERATED {non-contiguous, both} OPTIONAL
}
MRDC-Parameters-v1840 ::= SEQUENCE {
intraBandENDC-NominalSpacing-r18 ENUMERATED {supported} OPTIONAL
}
-- TAG-MRDC-PARAMETERS-STOP
-- ASN1STOP
– NCR-Parameters
The IE NCR-Parameters is used to indicate the UE capabilities supported by NCR-MT.
NCR-Parameters information element
-- ASN1START
-- TAG-NCR-PARAMETERS-START
NCR-Parameters-r18::= SEQUENCE {
inactiveStateNCR-r18 ENUMERATED {supported} OPTIONAL,
supportedNumberOfDRBs-NCR-r18 ENUMERATED {n1,n16} OPTIONAL,
dummy ENUMERATED {supported} OPTIONAL
}
-- TAG-NCR-PARAMETERS-STOP
-- ASN1STOP
– NRDC-Parameters
The IE NRDC-Parameters contains parameters specific to NR-DC, i.e., which are not applicable to NR SA.
NRDC-Parameters information element
-- ASN1START
-- TAG-NRDC-PARAMETERS-START
NRDC-Parameters ::= SEQUENCE {
measAndMobParametersNRDC MeasAndMobParametersMRDC OPTIONAL,
generalParametersNRDC GeneralParametersMRDC-XDD-Diff OPTIONAL,
fdd-Add-UE-NRDC-Capabilities UE-MRDC-CapabilityAddXDD-Mode OPTIONAL,
tdd-Add-UE-NRDC-Capabilities UE-MRDC-CapabilityAddXDD-Mode OPTIONAL,
fr1-Add-UE-NRDC-Capabilities UE-MRDC-CapabilityAddFRX-Mode OPTIONAL,
fr2-Add-UE-NRDC-Capabilities UE-MRDC-CapabilityAddFRX-Mode OPTIONAL,
dummy2 OCTET STRING OPTIONAL,
dummy SEQUENCE {} OPTIONAL
}
NRDC-Parameters-v1570 ::= SEQUENCE {
sfn-SyncNRDC ENUMERATED {supported} OPTIONAL
}
NRDC-Parameters-v15c0 ::= SEQUENCE {
pdcp-DuplicationSplitSRB ENUMERATED {supported} OPTIONAL,
pdcp-DuplicationSplitDRB ENUMERATED {supported} OPTIONAL
}
NRDC-Parameters-v1610 ::= SEQUENCE {
measAndMobParametersNRDC-v1610 MeasAndMobParametersMRDC-v1610 OPTIONAL
}
NRDC-Parameters-v1700 ::= SEQUENCE {
f1c-OverNR-RRC-r17 ENUMERATED {supported} OPTIONAL,
measAndMobParametersNRDC-v1700 MeasAndMobParametersMRDC-v1700
}
-- TAG-NRDC-PARAMETERS-STOP
-- ASN1STOP
– NTN-Parameters
The IE NTN-Parameters is used to convey the subset of UE Radio Access Capability Parameters that apply to NTN access when there is a difference compared to TN access.
NTN-Parameters information element
-- ASN1START
-- TAG-NTN-PARAMETERS-START
NTN-Parameters-r17 ::= SEQUENCE {
inactiveStateNTN-r17 ENUMERATED {supported} OPTIONAL,
ra-SDT-NTN-r17 ENUMERATED {supported} OPTIONAL,
srb-SDT-NTN-r17 ENUMERATED {supported} OPTIONAL,
measAndMobParametersNTN-r17 MeasAndMobParameters OPTIONAL,
mac-ParametersNTN-r17 MAC-Parameters OPTIONAL,
phy-ParametersNTN-r17 Phy-Parameters OPTIONAL,
fdd-Add-UE-NR-CapabilitiesNTN-r17 UE-NR-CapabilityAddXDD-Mode OPTIONAL,
fr1-Add-UE-NR-CapabilitiesNTN-r17 UE-NR-CapabilityAddFRX-Mode OPTIONAL,
ue-BasedPerfMeas-ParametersNTN-r17 UE-BasedPerfMeas-Parameters-r16 OPTIONAL,
son-ParametersNTN-r17 SON-Parameters-r16 OPTIONAL
}
NTN-Parameters-v1820 ::= SEQUENCE {
fr2-Add-UE-NR-CapabilitiesNTN-r18 UE-NR-CapabilityAddFRX-Mode OPTIONAL
}
-- TAG-NTN-PARAMETERS-STOP
-- ASN1STOP
– OLPC-SRS-Pos
The IE OLPC-SRS-Pos is used to convey OLPC SRS positioning related parameters specific for a certain band.
OLPC-SRS-Pos information element
-- ASN1START
-- TAG-OLPC-SRS-POS-START
OLPC-SRS-Pos-r16 ::= SEQUENCE {
olpc-SRS-PosBasedOnPRS-Serving-r16 ENUMERATED {supported} OPTIONAL,
olpc-SRS-PosBasedOnSSB-Neigh-r16 ENUMERATED {supported} OPTIONAL,
olpc-SRS-PosBasedOnPRS-Neigh-r16 ENUMERATED {supported} OPTIONAL,
maxNumberPathLossEstimatePerServing-r16 ENUMERATED {n1, n4, n8, n16} OPTIONAL
}
--TAG-OLPC-SRS-POS-STOP
-- ASN1STOP
– PDCP-Parameters
The IE PDCP-Parameters is used to convey capabilities related to PDCP.
PDCP-Parameters information element
-- ASN1START
-- TAG-PDCP-PARAMETERS-START
PDCP-Parameters ::= SEQUENCE {
supportedROHC-Profiles SEQUENCE {
profile0x0000 BOOLEAN,
profile0x0001 BOOLEAN,
profile0x0002 BOOLEAN,
profile0x0003 BOOLEAN,
profile0x0004 BOOLEAN,
profile0x0006 BOOLEAN,
profile0x0101 BOOLEAN,
profile0x0102 BOOLEAN,
profile0x0103 BOOLEAN,
profile0x0104 BOOLEAN
},
maxNumberROHC-ContextSessions ENUMERATED {cs2, cs4, cs8, cs12, cs16, cs24, cs32, cs48, cs64,
cs128, cs256, cs512, cs1024, cs16384, spare2, spare1},
uplinkOnlyROHC-Profiles ENUMERATED {supported} OPTIONAL,
continueROHC-Context ENUMERATED {supported} OPTIONAL,
outOfOrderDelivery ENUMERATED {supported} OPTIONAL,
shortSN ENUMERATED {supported} OPTIONAL,
pdcp-DuplicationSRB ENUMERATED {supported} OPTIONAL,
pdcp-DuplicationMCG-OrSCG-DRB ENUMERATED {supported} OPTIONAL,
...,
[[
drb-IAB-r16 ENUMERATED {supported} OPTIONAL,
non-DRB-IAB-r16 ENUMERATED {supported} OPTIONAL,
extendedDiscardTimer-r16 ENUMERATED {supported} OPTIONAL,
continueEHC-Context-r16 ENUMERATED {supported} OPTIONAL,
ehc-r16 ENUMERATED {supported} OPTIONAL,
maxNumberEHC-Contexts-r16 ENUMERATED {cs2, cs4, cs8, cs16, cs32, cs64, cs128, cs256, cs512,
cs1024, cs2048, cs4096, cs8192, cs16384, cs32768, cs65536} OPTIONAL,
jointEHC-ROHC-Config-r16 ENUMERATED {supported} OPTIONAL,
pdcp-DuplicationMoreThanTwoRLC-r16 ENUMERATED {supported} OPTIONAL
]],
[[
longSN-RedCap-r17 ENUMERATED {supported} OPTIONAL,
udc-r17 SEQUENCE {
standardDictionary-r17 ENUMERATED {supported} OPTIONAL,
operatorDictionary-r17 SEQUENCE {
versionOfDictionary-r17 INTEGER (0..15),
associatedPLMN-ID-r17 PLMN-Identity
} OPTIONAL,
continueUDC-r17 ENUMERATED {supported} OPTIONAL,
supportOfBufferSize-r17 ENUMERATED {kbyte4, kbyte8} OPTIONAL
} OPTIONAL
]],
[[
longSN-NCR-r18 ENUMERATED {supported} OPTIONAL,
supportOfPDU-SetDiscard-r18 ENUMERATED {supported} OPTIONAL,
psi-BasedDiscard-r18 ENUMERATED {supported} OPTIONAL,
supportOfSN-GapReport-r18 ENUMERATED {supported} OPTIONAL
]]
}
-- TAG-PDCP-PARAMETERS-STOP
-- ASN1STOP
– PDCP-ParametersMRDC
The IE PDCP-ParametersMRDC is used to convey PDCP related capabilities for MR-DC.
PDCP-ParametersMRDC information element
-- ASN1START
-- TAG-PDCP-PARAMETERSMRDC-START
PDCP-ParametersMRDC ::= SEQUENCE {
pdcp-DuplicationSplitSRB ENUMERATED {supported} OPTIONAL,
pdcp-DuplicationSplitDRB ENUMERATED {supported} OPTIONAL
}
PDCP-ParametersMRDC-v1610 ::= SEQUENCE {
scg-DRB-NR-IAB-r16 ENUMERATED {supported} OPTIONAL
}
-- TAG-PDCP-PARAMETERSMRDC-STOP
-- ASN1STOP
– Phy-Parameters
The IE Phy-Parameters is used to convey the physical layer capabilities.
Phy-Parameters information element
-- ASN1START
-- TAG-PHY-PARAMETERS-START
Phy-Parameters ::= SEQUENCE {
phy-ParametersCommon Phy-ParametersCommon OPTIONAL,
phy-ParametersXDD-Diff Phy-ParametersXDD-Diff OPTIONAL,
phy-ParametersFRX-Diff Phy-ParametersFRX-Diff OPTIONAL,
phy-ParametersFR1 Phy-ParametersFR1 OPTIONAL,
phy-ParametersFR2 Phy-ParametersFR2 OPTIONAL
}
Phy-Parameters-v16a0 ::= SEQUENCE {
phy-ParametersCommon-v16a0 Phy-ParametersCommon-v16a0 OPTIONAL
}
Phy-ParametersCommon ::= SEQUENCE {
csi-RS-CFRA-ForHO ENUMERATED {supported} OPTIONAL,
dynamicPRB-BundlingDL ENUMERATED {supported} OPTIONAL,
sp-CSI-ReportPUCCH ENUMERATED {supported} OPTIONAL,
sp-CSI-ReportPUSCH ENUMERATED {supported} OPTIONAL,
nzp-CSI-RS-IntefMgmt ENUMERATED {supported} OPTIONAL,
type2-SP-CSI-Feedback-LongPUCCH ENUMERATED {supported} OPTIONAL,
precoderGranularityCORESET ENUMERATED {supported} OPTIONAL,
dynamicHARQ-ACK-Codebook ENUMERATED {supported} OPTIONAL,
semiStaticHARQ-ACK-Codebook ENUMERATED {supported} OPTIONAL,
spatialBundlingHARQ-ACK ENUMERATED {supported} OPTIONAL,
dynamicBetaOffsetInd-HARQ-ACK-CSI ENUMERATED {supported} OPTIONAL,
pucch-Repetition-F1-3-4 ENUMERATED {supported} OPTIONAL,
ra-Type0-PUSCH ENUMERATED {supported} OPTIONAL,
dynamicSwitchRA-Type0-1-PDSCH ENUMERATED {supported} OPTIONAL,
dynamicSwitchRA-Type0-1-PUSCH ENUMERATED {supported} OPTIONAL,
pdsch-MappingTypeA ENUMERATED {supported} OPTIONAL,
pdsch-MappingTypeB ENUMERATED {supported} OPTIONAL,
interleavingVRB-ToPRB-PDSCH ENUMERATED {supported} OPTIONAL,
interSlotFreqHopping-PUSCH ENUMERATED {supported} OPTIONAL,
type1-PUSCH-RepetitionMultiSlots ENUMERATED {supported} OPTIONAL,
type2-PUSCH-RepetitionMultiSlots ENUMERATED {supported} OPTIONAL,
pusch-RepetitionMultiSlots ENUMERATED {supported} OPTIONAL,
pdsch-RepetitionMultiSlots ENUMERATED {supported} OPTIONAL,
downlinkSPS ENUMERATED {supported} OPTIONAL,
configuredUL-GrantType1 ENUMERATED {supported} OPTIONAL,
configuredUL-GrantType2 ENUMERATED {supported} OPTIONAL,
pre-EmptIndication-DL ENUMERATED {supported} OPTIONAL,
cbg-TransIndication-DL ENUMERATED {supported} OPTIONAL,
cbg-TransIndication-UL ENUMERATED {supported} OPTIONAL,
cbg-FlushIndication-DL ENUMERATED {supported} OPTIONAL,
dynamicHARQ-ACK-CodeB-CBG-Retx-DL ENUMERATED {supported} OPTIONAL,
rateMatchingResrcSetSemi-Static ENUMERATED {supported} OPTIONAL,
rateMatchingResrcSetDynamic ENUMERATED {supported} OPTIONAL,
bwp-SwitchingDelay ENUMERATED {type1, type2} OPTIONAL,
...,
[[
dummy ENUMERATED {supported} OPTIONAL
]],
[[
maxNumberSearchSpaces ENUMERATED {n10} OPTIONAL,
rateMatchingCtrlResrcSetDynamic ENUMERATED {supported} OPTIONAL,
maxLayersMIMO-Indication ENUMERATED {supported} OPTIONAL
]],
[[
spCellPlacement CarrierAggregationVariant OPTIONAL
]],
[[
-- R1 9-1: Basic channel structure and procedure of 2-step RACH
twoStepRACH-r16 ENUMERATED {supported} OPTIONAL,
-- R1 11-1: Monitoring DCI format 1_2 and DCI format 0_2
dci-Format1-2And0-2-r16 ENUMERATED {supported} OPTIONAL,
-- R1 11-1a: Monitoring both DCI format 0_1/1_1 and DCI format 0_2/1_2 in the same search space
monitoringDCI-SameSearchSpace-r16 ENUMERATED {supported} OPTIONAL,
-- R1 11-10: Type 2 configured grant release by DCI format 0_1
type2-CG-ReleaseDCI-0-1-r16 ENUMERATED {supported} OPTIONAL,
-- R1 11-11: Type 2 configured grant release by DCI format 0_2
type2-CG-ReleaseDCI-0-2-r16 ENUMERATED {supported} OPTIONAL,
-- R1 12-3: SPS release by DCI format 1_1
sps-ReleaseDCI-1-1-r16 ENUMERATED {supported} OPTIONAL,
-- R1 12-3a: SPS release by DCI format 1_2
sps-ReleaseDCI-1-2-r16 ENUMERATED {supported} OPTIONAL,
-- R1 14-8: CSI trigger states containing non-active BWP
csi-TriggerStateNon-ActiveBWP-r16 ENUMERATED {supported} OPTIONAL,
-- R1 20-2: Support up to 4 SMTCs configured for an IAB node MT per frequency location, including IAB-specific SMTC window periodicities
separateSMTC-InterIAB-Support-r16 ENUMERATED {supported} OPTIONAL,
-- R1 20-3: Support RACH configuration separately from the RACH configuration for UE access, including new IAB-specific offset and scaling factors
separateRACH-IAB-Support-r16 ENUMERATED {supported} OPTIONAL,
-- R1 20-5a: Support semi-static configuration/indication of UL-Flexible-DL slot formats for IAB-MT resources
ul-flexibleDL-SlotFormatSemiStatic-IAB-r16 ENUMERATED {supported} OPTIONAL,
-- R1 20-5b: Support dynamic indication of UL-Flexible-DL slot formats for IAB-MT resources
ul-flexibleDL-SlotFormatDynamics-IAB-r16 ENUMERATED {supported} OPTIONAL,
dft-S-OFDM-WaveformUL-IAB-r16 ENUMERATED {supported} OPTIONAL,
-- R1 20-6: Support DCI Format 2_5 based indication of soft resource availability to an IAB node
dci-25-AI-RNTI-Support-IAB-r16 ENUMERATED {supported} OPTIONAL,
-- R1 20-7: Support T_delta reception.
t-DeltaReceptionSupport-IAB-r16 ENUMERATED {supported} OPTIONAL,
-- R1 20-8: Support of Desired guard symbol reporting and provided guard symbok reception.
guardSymbolReportReception-IAB-r16 ENUMERATED {supported} OPTIONAL,
-- R1 18-8 HARQ-ACK codebook type and spatial bundling per PUCCH group
harqACK-CB-SpatialBundlingPUCCH-Group-r16 ENUMERATED {supported} OPTIONAL,
-- R1 19-2: Cross Slot Scheduling
crossSlotScheduling-r16 SEQUENCE {
non-SharedSpectrumChAccess-r16 ENUMERATED {supported} OPTIONAL,
sharedSpectrumChAccess-r16 ENUMERATED {supported} OPTIONAL
} OPTIONAL,
maxNumberSRS-PosPathLossEstimateAllServingCells-r16 ENUMERATED {n1, n4, n8, n16} OPTIONAL,
extendedCG-Periodicities-r16 ENUMERATED {supported} OPTIONAL,
extendedSPS-Periodicities-r16 ENUMERATED {supported} OPTIONAL,
codebookVariantsList-r16 CodebookVariantsList-r16 OPTIONAL,
-- R1 11-6: PUSCH repetition Type A
pusch-RepetitionTypeA-r16 SEQUENCE {
sharedSpectrumChAccess-r16 ENUMERATED {supported} OPTIONAL,
non-SharedSpectrumChAccess-r16 ENUMERATED {supported} OPTIONAL
} OPTIONAL,
-- R1 11-4b: DL priority indication in DCI with mixed DCI formats
dci-DL-PriorityIndicator-r16 ENUMERATED {supported} OPTIONAL,
-- R1 12-1a: UL priority indication in DCI with mixed DCI formats
dci-UL-PriorityIndicator-r16 ENUMERATED {supported} OPTIONAL,
-- R1 16-1e: Maximum number of configured pathloss reference RSs for PUSCH/PUCCH/SRS by RRC for MAC-CE based pathloss reference RS update
maxNumberPathlossRS-Update-r16 ENUMERATED {n4, n8, n16, n32, n64} OPTIONAL,
-- R1 18-9: Usage of the PDSCH starting time for HARQ-ACK type 2 codebook
type2-HARQ-ACK-Codebook-r16 ENUMERATED {supported} OPTIONAL,
-- R1 16-1g-1: Resources for beam management, pathloss measurement, BFD, RLM and new beam identification across frequency ranges
maxTotalResourcesForAcrossFreqRanges-r16 SEQUENCE {
maxNumberResWithinSlotAcrossCC-AcrossFR-r16 ENUMERATED {n2, n4, n8, n12, n16, n32, n64, n128} OPTIONAL,
maxNumberResAcrossCC-AcrossFR-r16 ENUMERATED {n2, n4, n8, n12, n16, n32, n40, n48, n64, n72, n80, n96, n128, n256}
OPTIONAL
} OPTIONAL,
-- R1 16-2a-4: HARQ-ACK for multi-DCI based multi-TRP - separate
harqACK-separateMultiDCI-MultiTRP-r16 SEQUENCE {
maxNumberLongPUCCHs-r16 ENUMERATED {longAndLong, longAndShort, shortAndShort} OPTIONAL
} OPTIONAL,
-- R1 16-2a-4: HARQ-ACK for multi-DCI based multi-TRP - joint
harqACK-jointMultiDCI-MultiTRP-r16 ENUMERATED {supported} OPTIONAL,
-- R4 9-1: BWP switching on multiple CCs RRM requirements
bwp-SwitchingMultiCCs-r16 CHOICE {
type1-r16 ENUMERATED {us100, us200},
type2-r16 ENUMERATED {us200, us400, us800, us1000}
} OPTIONAL
]],
[[
targetSMTC-SCG-r16 ENUMERATED {supported} OPTIONAL,
supportRepetitionZeroOffsetRV-r16 ENUMERATED {supported} OPTIONAL,
-- R1 11-12: in-order CBG-based re-transmission
cbg-TransInOrderPUSCH-UL-r16 ENUMERATED {supported} OPTIONAL
]],
[[
-- R4 6-3: Dormant BWP switching on multiple CCs RRM requirements
bwp-SwitchingMultiDormancyCCs-r16 CHOICE {
type1-r16 ENUMERATED {us100, us200},
type2-r16 ENUMERATED {us200, us400, us800, us1000}
} OPTIONAL,
-- R1 16-2a-8: Indicates that retransmission scheduled by a different CORESETPoolIndex for multi-DCI multi-TRP is not supported.
supportRetx-Diff-CoresetPool-Multi-DCI-TRP-r16 ENUMERATED {notSupported} OPTIONAL,
-- R1 22-10: Support of pdcch-MonitoringAnyOccasionsWithSpanGap in case of cross-carrier scheduling with different SCSs
pdcch-MonitoringAnyOccasionsWithSpanGapCrossCarrierSch-r16 ENUMERATED {mode2, mode3} OPTIONAL
]],
[[
-- R1 16-1j-1: Support of 2 port CSI-RS for new beam identification
newBeamIdentifications2PortCSI-RS-r16 ENUMERATED {supported} OPTIONAL,
-- R1 16-1j-2: Support of 2 port CSI-RS for pathloss estimation
pathlossEstimation2PortCSI-RS-r16 ENUMERATED {supported} OPTIONAL
]],
[[
mux-HARQ-ACK-withoutPUCCH-onPUSCH-r16 ENUMERATED {supported} OPTIONAL
]],
[[
-- R1 31-1: Support of Desired Guard Symbol reporting and provided guard symbol reception.
guardSymbolReportReception-IAB-r17 ENUMERATED {supported} OPTIONAL,
-- R1 31-2: support of restricted IAB-DU beam reception
restricted-IAB-DU-BeamReception-r17 ENUMERATED {supported} OPTIONAL,
-- R1 31-3: support of recommended IAB-MT beam transmission for DL and UL beam
recommended-IAB-MT-BeamTransmission-r17 ENUMERATED {supported} OPTIONAL,
-- R1 31-4: support of case 6 timing alignment indication reception
case6-TimingAlignmentReception-IAB-r17 ENUMERATED {supported} OPTIONAL,
-- R1 31-5: support of case 7 timing offset indication reception and case 7 timing at parent-node indication reception
case7-TimingAlignmentReception-IAB-r17 ENUMERATED {supported} OPTIONAL,
-- R1 31-6: support of desired DL Tx power adjustment reporting and DL Tx power adjustment reception
dl-tx-PowerAdjustment-IAB-r17 ENUMERATED {supported} OPTIONAL,
-- R1 31-7: support of desired IAB-MT PSD range reporting
desired-ul-tx-PowerAdjustment-r17 ENUMERATED {supported} OPTIONAL,
-- R1 31-8: support of monitoring DCI Format 2_5 scrambled by AI-RNTI for indication of FDM soft resource availability to an IAB node
fdm-SoftResourceAvailability-DynamicIndication-r17 ENUMERATED{supported} OPTIONAL,
-- R1 31-10: Support of updated T_delta range reception
updated-T-DeltaRangeReception-r17 ENUMERATED{supported} OPTIONAL,
-- R1 30-5: Support slot based dynamic PUCCH repetition indication for PUCCH formats 0/1/2/3/4
slotBasedDynamicPUCCH-Rep-r17 ENUMERATED {supported} OPTIONAL,
-- R1 25-1: Support of HARQ-ACK deferral in case of TDD collision
sps-HARQ-ACK-Deferral-r17 SEQUENCE {
non-SharedSpectrumChAccess-r17 ENUMERATED {supported} OPTIONAL,
sharedSpectrumChAccess-r17 ENUMERATED {supported} OPTIONAL
} OPTIONAL,
-- R1 23-1-1k Maximum number of configured CC lists (per UE)
unifiedJointTCI-commonUpdate-r17 INTEGER (1..4) OPTIONAL,
-- R1 23-2-1c PDCCH repetition with a single span of three contiguous OFDM symbols that is within the first four OFDM symbols in a slot
mTRP-PDCCH-singleSpan-r17 ENUMERATED {supported} OPTIONAL,
-- R1 27-23: Support of more than one activated PRS processing windows across all active DL BWPs
supportedActivatedPRS-ProcessingWindow-r17 ENUMERATED {n2, n3, n4} OPTIONAL,
cg-TimeDomainAllocationExtension-r17 ENUMERATED {supported} OPTIONAL
]],
[[
-- R1 25-20: Propagation delay compensation based on Rel-15 TA procedure for TN and licensed
ta-BasedPDC-TN-NonSharedSpectrumChAccess-r17 ENUMERATED {supported} OPTIONAL,
-- R1 31-11: Directional Collision Handling in DC operation
directionalCollisionDC-IAB-r17 ENUMERATED {supported} OPTIONAL
]],
[[
dummy1 ENUMERATED {supported} OPTIONAL,
dummy2 ENUMERATED {supported} OPTIONAL,
dummy3 ENUMERATED {supported} OPTIONAL,
dummy4 ENUMERATED {supported} OPTIONAL,
srs-AdditionalRepetition-r17 ENUMERATED {supported} OPTIONAL,
pusch-Repetition-CG-SDT-r17 ENUMERATED {supported} OPTIONAL
]],
[[
multiPDSCH-PerSlotType1-CB-Support-r17 ENUMERATED {supported} OPTIONAL
]],
[[
-- R1 42-6: Joint operation of power domain and spatial domain adaptation
jointPowerSpatialAdaptation-r18 ENUMERATED {supported} OPTIONAL,
-- R1 43-3: Aperiodic beam indication for access link
ncr-AperiodicBeamInd-AccessLink-r18 SEQUENCE {
scs-15kHz-r18 INTEGER (0..1) OPTIONAL,
scs-30kHz-r18 INTEGER (0..1) OPTIONAL,
scs-60kHz-r18 INTEGER (0..2) OPTIONAL,
scs-120kHz-r18 INTEGER (0..2) OPTIONAL
} OPTIONAL,
-- R1 43-4: Semi-persistent beam indication for access link
ncr-Semi-PersistentBeamInd-AccessLink-r18 ENUMERATED {supported} OPTIONAL,
-- R1 43-5: Simulatenous UL transmission of backhaul link and C-Link
ncr-SimultaneousUL-BackhaulAndC-Link-r18 ENUMERATED {supported} OPTIONAL,
-- R1 43-6: Dedicated signalling for backhaul link beam indication
ncr-BackhaulBeamInd-r18 ENUMERATED {nonUnifiedTCI, unifiedTCI, both} OPTIONAL,
-- R1 43-8: Adaptive beam for NCR backhaul link/C-link
ncr-AdaptiveBeamBackhaulAndC-Link-r18 ENUMERATED {nonUnifiedTCI, unifiedTCI, both} OPTIONAL,
-- R1 49-4a: Nominal RBG size of Configuration 3 for FDRA type 0 for DCI format 1_3
nominalRBG-SizeOfConfig-3-FDRA-Type-0-DCI-1-3-r18 ENUMERATED {supported} OPTIONAL,
-- R1 49-4b: Nominal RBG size of Configuration 3 for FDRA type 0 for DCI format 0_3
nominalRBG-SizeOfConfig-3-FDRA-Type-0-DCI-0-3-r18 ENUMERATED {supported} OPTIONAL,
-- R1 49-4c: Configurable Type-1A fields for DCI format 0_3/1_3
configurableType-1A-FieldsForDCI-0-3-And-1-3-r18 ENUMERATED {supported} OPTIONAL,
-- R1 49-4d: FDRA Type 1 granularity of 2, 4, 8, or 16 consecutive RBs based RIV for DCI format 1_3/0_3
fdra-Type-1-Gty-2-4-8-16-RBs-RIV-DCI-1-3-And-0-3-r18 ENUMERATED {supported} OPTIONAL,
-- R1 49-6b: DL priority indication in DCI with mixed DCI formats including DCI format 1_3
priorityIndicationDL-r18 ENUMERATED {supported} OPTIONAL,
-- R1 49-7a: UL priority indication in DCI with mixed DCI formats including DCI format 0_3
priorityIndicationUL-r18 ENUMERATED {supported} OPTIONAL,
-- R1 49-10: Dynamic indication of applicable minimum scheduling restriction by DCI format 0_3/1_3
dynamicIndicationSchedulingRestriction-r18 ENUMERATED {supported} OPTIONAL,
-- R1 49-11: PHY priority indication for one-shot HARQ-ACK feedback triggered by DCI format 1_3
priorityIndicationOneSlotHARQ-r18 ENUMERATED {supported} OPTIONAL,
-- R1 50-1c: Multi-PUSCHs Type 2 configured grant release by DCI format 0_1
multiPUSCH-DCI-0-1-r18 ENUMERATED {supported} OPTIONAL,
-- R1 50-1d: Multi-PUSCHs Type 2 configured grant release by DCI format 0_2
multiPUSCH-DCI-0-2-r18 ENUMERATED {supported} OPTIONAL,
-- R1 55-1: Additional SR periodicities
additionalSR-Periodicities-r18 SEQUENCE {
scs-30kHz-r18 ENUMERATED {supported} OPTIONAL,
scs-120kHz-r18 ENUMERATED {supported} OPTIONAL
} OPTIONAL,
-- R1 55-5: Enable MAC CE based pathloss RS updates for Type 1 CG-PUSCH
pathlossRS-UpdateForType1CG-PUSCH-r18 ENUMERATED {supported} OPTIONAL,
-- R4 38-9: Dormant BWP switching on multiple CCs RRM requirements with DCI 0-3/1-3
bwp-SwitchingMultiDormancyCC-DCI-0-3-And-1-3-r18 CHOICE {
type1-r18 ENUMERATED {us100, us200},
type2-r18 ENUMERATED {us200, us400, us800, us1000}
} OPTIONAL
]],
[[
ncr-dft-S-OFDM-WaveformUL-r18 ENUMERATED {supported} OPTIONAL
]]
}
Phy-ParametersCommon-v16a0 ::= SEQUENCE {
srs-PeriodicityAndOffsetExt-r16 ENUMERATED {supported} OPTIONAL
}
Phy-ParametersXDD-Diff ::= SEQUENCE {
dynamicSFI ENUMERATED {supported} OPTIONAL,
twoPUCCH-F0-2-ConsecSymbols ENUMERATED {supported} OPTIONAL,
twoDifferentTPC-Loop-PUSCH ENUMERATED {supported} OPTIONAL,
twoDifferentTPC-Loop-PUCCH ENUMERATED {supported} OPTIONAL,
...,
[[
dl-SchedulingOffset-PDSCH-TypeA ENUMERATED {supported} OPTIONAL,
dl-SchedulingOffset-PDSCH-TypeB ENUMERATED {supported} OPTIONAL,
ul-SchedulingOffset ENUMERATED {supported} OPTIONAL
]]
}
Phy-ParametersFRX-Diff ::= SEQUENCE {
dynamicSFI ENUMERATED {supported} OPTIONAL,
dummy1 BIT STRING (SIZE (2)) OPTIONAL,
twoFL-DMRS BIT STRING (SIZE (2)) OPTIONAL,
dummy2 BIT STRING (SIZE (2)) OPTIONAL,
dummy3 BIT STRING (SIZE (2)) OPTIONAL,
supportedDMRS-TypeDL ENUMERATED {type1, type1And2} OPTIONAL,
supportedDMRS-TypeUL ENUMERATED {type1, type1And2} OPTIONAL,
semiOpenLoopCSI ENUMERATED {supported} OPTIONAL,
csi-ReportWithoutPMI ENUMERATED {supported} OPTIONAL,
csi-ReportWithoutCQI ENUMERATED {supported} OPTIONAL,
onePortsPTRS BIT STRING (SIZE (2)) OPTIONAL,
twoPUCCH-F0-2-ConsecSymbols ENUMERATED {supported} OPTIONAL,
pucch-F2-WithFH ENUMERATED {supported} OPTIONAL,
pucch-F3-WithFH ENUMERATED {supported} OPTIONAL,
pucch-F4-WithFH ENUMERATED {supported} OPTIONAL,
pucch-F0-2WithoutFH ENUMERATED {notSupported} OPTIONAL,
pucch-F1-3-4WithoutFH ENUMERATED {notSupported} OPTIONAL,
mux-SR-HARQ-ACK-CSI-PUCCH-MultiPerSlot ENUMERATED {supported} OPTIONAL,
uci-CodeBlockSegmentation ENUMERATED {supported} OPTIONAL,
onePUCCH-LongAndShortFormat ENUMERATED {supported} OPTIONAL,
twoPUCCH-AnyOthersInSlot ENUMERATED {supported} OPTIONAL,
intraSlotFreqHopping-PUSCH ENUMERATED {supported} OPTIONAL,
pusch-LBRM ENUMERATED {supported} OPTIONAL,
pdcch-BlindDetectionCA INTEGER (4..16) OPTIONAL,
tpc-PUSCH-RNTI ENUMERATED {supported} OPTIONAL,
tpc-PUCCH-RNTI ENUMERATED {supported} OPTIONAL,
tpc-SRS-RNTI ENUMERATED {supported} OPTIONAL,
absoluteTPC-Command ENUMERATED {supported} OPTIONAL,
twoDifferentTPC-Loop-PUSCH ENUMERATED {supported} OPTIONAL,
twoDifferentTPC-Loop-PUCCH ENUMERATED {supported} OPTIONAL,
pusch-HalfPi-BPSK ENUMERATED {supported} OPTIONAL,
pucch-F3-4-HalfPi-BPSK ENUMERATED {supported} OPTIONAL,
almostContiguousCP-OFDM-UL ENUMERATED {supported} OPTIONAL,
sp-CSI-RS ENUMERATED {supported} OPTIONAL,
sp-CSI-IM ENUMERATED {supported} OPTIONAL,
tdd-MultiDL-UL-SwitchPerSlot ENUMERATED {supported} OPTIONAL,
multipleCORESET ENUMERATED {supported} OPTIONAL,
...,
[[
csi-RS-IM-ReceptionForFeedback CSI-RS-IM-ReceptionForFeedback OPTIONAL,
csi-RS-ProcFrameworkForSRS CSI-RS-ProcFrameworkForSRS OPTIONAL,
csi-ReportFramework CSI-ReportFramework OPTIONAL,
mux-SR-HARQ-ACK-CSI-PUCCH-OncePerSlot SEQUENCE {
sameSymbol ENUMERATED {supported} OPTIONAL,
diffSymbol ENUMERATED {supported} OPTIONAL
} OPTIONAL,
mux-SR-HARQ-ACK-PUCCH ENUMERATED {supported} OPTIONAL,
mux-MultipleGroupCtrlCH-Overlap ENUMERATED {supported} OPTIONAL,
dl-SchedulingOffset-PDSCH-TypeA ENUMERATED {supported} OPTIONAL,
dl-SchedulingOffset-PDSCH-TypeB ENUMERATED {supported} OPTIONAL,
ul-SchedulingOffset ENUMERATED {supported} OPTIONAL,
dl-64QAM-MCS-TableAlt ENUMERATED {supported} OPTIONAL,
ul-64QAM-MCS-TableAlt ENUMERATED {supported} OPTIONAL,
cqi-TableAlt ENUMERATED {supported} OPTIONAL,
oneFL-DMRS-TwoAdditionalDMRS-UL ENUMERATED {supported} OPTIONAL,
twoFL-DMRS-TwoAdditionalDMRS-UL ENUMERATED {supported} OPTIONAL,
oneFL-DMRS-ThreeAdditionalDMRS-UL ENUMERATED {supported} OPTIONAL
]],
[[
pdcch-BlindDetectionNRDC SEQUENCE {
pdcch-BlindDetectionMCG-UE INTEGER (1..15),
pdcch-BlindDetectionSCG-UE INTEGER (1..15)
} OPTIONAL,
mux-HARQ-ACK-PUSCH-DiffSymbol ENUMERATED {supported} OPTIONAL
]],
[[
-- R1 11-1b: Type 1 HARQ-ACK codebook support for relative TDRA for DL
type1-HARQ-ACK-Codebook-r16 ENUMERATED {supported} OPTIONAL,
-- R1 11-8: Enhanced UL power control scheme
enhancedPowerControl-r16 ENUMERATED {supported} OPTIONAL,
-- R1 16-1b-1: TCI state activation across multiple CCs
simultaneousTCI-ActMultipleCC-r16 ENUMERATED {supported} OPTIONAL,
-- R1 16-1b-2: Spatial relation update across multiple CCs
simultaneousSpatialRelationMultipleCC-r16 ENUMERATED {supported} OPTIONAL,
cli-RSSI-FDM-DL-r16 ENUMERATED {supported} OPTIONAL,
cli-SRS-RSRP-FDM-DL-r16 ENUMERATED {supported} OPTIONAL,
-- R1 19-3: Maximum MIMO Layer Adaptation
maxLayersMIMO-Adaptation-r16 ENUMERATED {supported} OPTIONAL,
-- R1 12-5: Configuration of aggregation factor per SPS configuration
aggregationFactorSPS-DL-r16 ENUMERATED {supported} OPTIONAL,
-- R1 16-1g: Resources for beam management, pathloss measurement, BFD, RLM and new beam identification
maxTotalResourcesForOneFreqRange-r16 SEQUENCE {
maxNumberResWithinSlotAcrossCC-OneFR-r16 ENUMERATED {n2, n4, n8, n12, n16, n32, n64, n128} OPTIONAL,
maxNumberResAcrossCC-OneFR-r16 ENUMERATED {n2, n4, n8, n12, n16, n32, n40, n48, n64, n72, n80, n96, n128, n256}
OPTIONAL
} OPTIONAL,
-- R1 16-7: Extension of the maximum number of configured aperiodic CSI report settings
csi-ReportFrameworkExt-r16 CSI-ReportFrameworkExt-r16 OPTIONAL
]],
[[
twoTCI-Act-servingCellInCC-List-r16 ENUMERATED {supported} OPTIONAL
]],
[[
-- R1 22-11: Support of 'cri-RI-CQI' report without non-PMI-PortIndication
cri-RI-CQI-WithoutNon-PMI-PortInd-r16 ENUMERATED {supported} OPTIONAL
]],
[[
-- R1 25-11: 4-bits subband CQI for TN and licensed
cqi-4-BitsSubbandTN-NonSharedSpectrumChAccess-r17 ENUMERATED {supported} OPTIONAL
]],
[[
multipleCORESET-RedCap-r17 ENUMERATED {supported} OPTIONAL
]]
}
Phy-ParametersFR1 ::= SEQUENCE {
pdcch-MonitoringSingleOccasion ENUMERATED {supported} OPTIONAL,
scs-60kHz ENUMERATED {supported} OPTIONAL,
pdsch-256QAM-FR1 ENUMERATED {supported} OPTIONAL,
pdsch-RE-MappingFR1-PerSymbol ENUMERATED {n10, n20} OPTIONAL,
...,
[[
pdsch-RE-MappingFR1-PerSlot ENUMERATED {n16, n32, n48, n64, n80, n96, n112, n128,
n144, n160, n176, n192, n208, n224, n240, n256} OPTIONAL
]],
[[
-- R1 22-12: PDCCH monitoring with a single span of three contiguous OFDM symbols that is within the first four OFDM symbols in a
-- slot
pdcch-MonitoringSingleSpanFirst4Sym-r16 ENUMERATED {supported} OPTIONAL
]],
[[
-- R1 56-4: K1 range extension defined for ATG as well
k1-RangeExtensionATG-r18 ENUMERATED {supported} OPTIONAL,
-- R1 56-3: Increasing the number of HARQ processes defined for ATG as well
maxHARQ-ProcessNumberATG-r18 ENUMERATED {u16d32, u32d16, u32d32} OPTIONAL,
-- R1 56-1: Uplink Time and Frequency pre-compensation and timing relationship enhancements defined for ATG as well
uplinkPreCompensationATG-r18 ENUMERATED {supported} OPTIONAL,
-- R1 56-2: UE reporting of TA information
uplinkTA-ReportingATG-r18 ENUMERATED {supported} OPTIONAL,
-- R4 36-1: MU-MIMO Interference Mitigation advanced receiver
advReceiver-MU-MIMO-r18 ENUMERATED {supported} OPTIONAL,
-- R4 41-1: Support of delta PPowerClass reporting mechanism
deltaPowerClassReporting-r18 ENUMERATED {type1, type2} OPTIONAL,
-- R1 51-2b: Support 12 PRB CORESET0 with an associated SS/PBCH block located at GSCN 41637
support12PRB-CORESET0-GSCN-41637-r18 ENUMERATED {supported} OPTIONAL,
-- R1 51-3: Support 5 MHz channel bandwidth with 20 PRB CORESET0
support5MHz-ChannelBW-20PRB-CORESET0-r18 ENUMERATED {supported} OPTIONAL
]]
}
Phy-ParametersFR2 ::= SEQUENCE {
dummy ENUMERATED {supported} OPTIONAL,
pdsch-RE-MappingFR2-PerSymbol ENUMERATED {n6, n20} OPTIONAL,
...,
[[
pCell-FR2 ENUMERATED {supported} OPTIONAL,
pdsch-RE-MappingFR2-PerSlot ENUMERATED {n16, n32, n48, n64, n80, n96, n112, n128,
n144, n160, n176, n192, n208, n224, n240, n256} OPTIONAL
]],
[[
-- R1 16-1c: Support of default spatial relation and pathloss reference RS for dedicated-PUCCH/SRS and PUSCH
defaultSpatialRelationPathlossRS-r16 ENUMERATED {supported} OPTIONAL,
-- R1 16-1d: Support of spatial relation update for AP-SRS via MAC CE
spatialRelationUpdateAP-SRS-r16 ENUMERATED {supported} OPTIONAL,
maxNumberSRS-PosSpatialRelationsAllServingCells-r16 ENUMERATED {n0, n1, n2, n4, n8, n16} OPTIONAL
]],
[[
-- R4 30-3: Supports Indication of multi-Rx operation preference
multiRxPreferenceIndication-r18 ENUMERATED {supported} OPTIONAL
]]
}
-- TAG-PHY-PARAMETERS-STOP
-- ASN1STOP
– Phy-ParametersMRDC
The IE Phy-ParametersMRDC is used to convey physical layer capabilities for MR-DC.
Phy-ParametersMRDC information element
-- ASN1START
-- TAG-PHY-PARAMETERSMRDC-START
Phy-ParametersMRDC ::= SEQUENCE {
naics-Capability-List SEQUENCE (SIZE (1..maxNrofNAICS-Entries)) OF NAICS-Capability-Entry OPTIONAL,
...,
[[
spCellPlacement CarrierAggregationVariant OPTIONAL
]],
[[
-- R1 18-3b: Semi-statically configured LTE UL transmissions in all UL subframes not limited to tdm-pattern in case of TDD PCell
tdd-PCellUL-TX-AllUL-Subframe-r16 ENUMERATED {supported} OPTIONAL,
-- R1 18-3a: Semi-statically configured LTE UL transmissions in all UL subframes not limited to tdm-pattern in case of FDD PCell
fdd-PCellUL-TX-AllUL-Subframe-r16 ENUMERATED {supported} OPTIONAL
]]
}
NAICS-Capability-Entry ::= SEQUENCE {
numberOfNAICS-CapableCC INTEGER(1..5),
numberOfAggregatedPRB ENUMERATED {n50, n75, n100, n125, n150, n175, n200, n225,
n250, n275, n300, n350, n400, n450, n500, spare},
...
}
-- TAG-PHY-PARAMETERSMRDC-STOP
-- ASN1STOP
– Phy-ParametersSharedSpectrumChAccess
The IE Phy-ParametersSharedSpectrumChAccess is used to convey the physical layer capabilities specific for shared spectrum channel access.
Phy-ParametersSharedSpectrumChAccess information element
-- ASN1START
-- TAG-PHY-PARAMETERSSHAREDSPECTRUMCHACCESS-START
Phy-ParametersSharedSpectrumChAccess-r16 ::= SEQUENCE {
-- 10-32 (1-2): SS block based SINR measurement (SS-SINR) for unlicensed spectrum
ss-SINR-Meas-r16 ENUMERATED {supported} OPTIONAL,
-- 10-33 (2-32a): Semi-persistent CSI report on PUCCH for unlicensed spectrum
sp-CSI-ReportPUCCH-r16 ENUMERATED {supported} OPTIONAL,
-- 10-33a (2-32b): Semi-persistent CSI report on PUSCH for unlicensed spectrum
sp-CSI-ReportPUSCH-r16 ENUMERATED {supported} OPTIONAL,
-- 10-34 (3-6): Dynamic SFI monitoring for unlicensed spectrum
dynamicSFI-r16 ENUMERATED {supported} OPTIONAL,
-- 10-35c (4-19c): SR/HARQ-ACK/CSI multiplexing once per slot using a PUCCH (or HARQ-ACK/CSI piggybacked on a PUSCH) when SR/HARQ-
-- ACK/CSI are supposed to be sent with different starting symbols in a slot for unlicensed spectrum
-- 10-35 (4-19): SR/HARQ-ACK/CSI multiplexing once per slot using a PUCCH (or HARQ-ACK/CSI piggybacked on a PUSCH) when SR/HARQ-
-- ACK/CSI are supposed to be sent with the same starting symbol on the PUCCH resources in a slot for unlicensed spectrum
mux-SR-HARQ-ACK-CSI-PUCCH-OncePerSlot-r16 SEQUENCE {
sameSymbol-r16 ENUMERATED {supported} OPTIONAL,
diffSymbol-r16 ENUMERATED {supported} OPTIONAL
} OPTIONAL,
-- 10-35a (4-19a): Overlapping PUCCH resources have different starting symbols in a slot for unlicensed spectrum
mux-SR-HARQ-ACK-PUCCH-r16 ENUMERATED {supported} OPTIONAL,
-- 10-35b (4-19b): SR/HARQ-ACK/CSI multiplexing more than once per slot using a PUCCH (or HARQ-ACK/CSI piggybacked on a PUSCH) when
-- SR/HARQ ACK/CSI are supposed to be sent with the same or different starting symbol in a slot for unlicensed spectrum
mux-SR-HARQ-ACK-CSI-PUCCH-MultiPerSlot-r16 ENUMERATED {supported} OPTIONAL,
-- 10-36 (4-28): HARQ-ACK multiplexing on PUSCH with different PUCCH/PUSCH starting OFDM symbols for unlicensed spectrum
mux-HARQ-ACK-PUSCH-DiffSymbol-r16 ENUMERATED {supported} OPTIONAL,
-- 10-37 (4-23): Repetitions for PUCCH format 1, 3, and 4 over multiple slots with K = 2, 4, 8 for unlicensed spectrum
pucch-Repetition-F1-3-4-r16 ENUMERATED {supported} OPTIONAL,
-- 10-38 (5-14): Type 1 configured PUSCH repetitions over multiple slots for unlicensed spectrum
type1-PUSCH-RepetitionMultiSlots-r16 ENUMERATED {supported} OPTIONAL,
-- 10-39 (5-16): Type 2 configured PUSCH repetitions over multiple slots for unlicensed spectrum
type2-PUSCH-RepetitionMultiSlots-r16 ENUMERATED {supported} OPTIONAL,
-- 10-40 (5-17): PUSCH repetitions over multiple slots for unlicensed spectrum
pusch-RepetitionMultiSlots-r16 ENUMERATED {supported} OPTIONAL,
-- 10-40a (5-17a): PDSCH repetitions over multiple slots for unlicensed spectrum
pdsch-RepetitionMultiSlots-r16 ENUMERATED {supported} OPTIONAL,
-- 10-41 (5-18): DL SPS
downlinkSPS-r16 ENUMERATED {supported} OPTIONAL,
-- 10-42 (5-19): Type 1 Configured UL grant
configuredUL-GrantType1-r16 ENUMERATED {supported} OPTIONAL,
-- 10-43 (5-20): Type 2 Configured UL grant
configuredUL-GrantType2-r16 ENUMERATED {supported} OPTIONAL,
-- 10-44 (5-21): Pre-emption indication for DL
pre-EmptIndication-DL-r16 ENUMERATED {supported} OPTIONAL,
...
}
-- TAG-PHY-PARAMETERSSHAREDSPECTRUMCHACCESS-STOP
-- ASN1STOP
– PosSRS-BWA-RRC-Inactive
The IE PosSRS-BWA-RRC-Inactive is used to convey the capabilities supported by the UE for support of positioning SRS bandwidth aggregation in RRC_INACTIVE
PosSRS-BWA-RRC-Inactive information element
-- ASN1START
-- TAG-POSSRS-BWA-RRC-INACTIVE-START
PosSRS-BWA-RRC-Inactive-r18 ::= SEQUENCE {
numOfCarriersIntraBandContiguous-r18 ENUMERATED {two, three, twoandthree},
maximumAggregatedBW-TwoCarriersFR1-r18 ENUMERATED { mhz20, mhz40, mhz50, mhz80, mhz100, mhz160,
mhz180, mhz190, mhz200} OPTIONAL,
maximumAggregatedBW-TwoCarriersFR2-r18 ENUMERATED {mhz50, mhz100, mhz200, mhz400, mhz600, mhz800} OPTIONAL,
maximumAggregatedBW-ThreeCarriersFR1-r18 ENUMERATED {mhz80, mhz100, mhz160, mhz200, mhz240, mhz300} OPTIONAL,
maximumAggregatedBW-ThreeCarriersFR2-r18 ENUMERATED {mhz50, mhz100, mhz200, mhz300, mhz400, mhz600,
mhz800, mhz1000, mhz1200} OPTIONAL,
maximumAggregatedResourceSet-r18 ENUMERATED {n1, n2, n4, n8, n12, n16},
maximumAggregatedResourcePeriodic-r18 ENUMERATED {n1, n2, n4, n8, n16, n32, n64},
maximumAggregatedResourceSemi-r18 ENUMERATED {n0, n1, n2, n4, n8, n16, n32, n64},
maximumAggregatedResourcePeriodicPerSlot-r18 ENUMERATED {n1, n2, n3, n4, n5, n6, n8, n10, n12, n14},
maximumAggregatedResourceSemiPerSlot-r18 ENUMERATED {n0, n1, n2, n3, n4, n5, n6, n8, n10, n12, n14},
guardPeriod-r18 ENUMERATED {n0, n30, n100, n140, n200},
powerClassForTwoAggregatedCarriers-r18 ENUMERATED {pc2, pc3} OPTIONAL,
powerClassForThreeAggregatedCarriers-r18 ENUMERATED {pc2, pc3} OPTIONAL,
...
}
-- TAG-POSSRS-BWA-RRC-INACTIVE-STOP
-- ASN1STOP
– PosSRS-RRC-Inactive-OutsideInitialUL-BWP
The IE PosSRS-RRC-Inactive-OutsideInitialUL-BWP is used to convey the capabilities supported by the UE for SRS for Positioning transmission in RRC_INACTIVE state configured outside initial UL BWP.
PosSRS-RRC-Inactive-OutsideInitialUL-BWP information element
-- ASN1START
-- TAG-POSSRS-RRC-INACTIVE-OUTSIDEINITIALUL-BWP-START
PosSRS-RRC-Inactive-OutsideInitialUL-BWP-r17::= SEQUENCE {
-- R1 27-15b: Positioning SRS transmission in RRC_INACTIVE state configured outside initial UL BWP
maxSRSposBandwidthForEachSCS-withinCC-FR1-r17 ENUMERATED {mhz5, mhz10, mhz15, mhz20, mhz25, mhz30, mhz35, mhz40,
mhz45, mhz50, mhz60, mhz70, mhz80, mhz90, mhz100} OPTIONAL,
maxSRSposBandwidthForEachSCS-withinCC-FR2-r17 ENUMERATED {mhz50, mhz100, mhz200, mhz400} OPTIONAL,
maxNumOfSRSposResourceSets-r17 ENUMERATED {n1, n2, n4, n8, n12, n16} OPTIONAL,
maxNumOfPeriodicSRSposResources-r17 ENUMERATED {n1, n2, n4, n8, n16, n32, n64} OPTIONAL,
maxNumOfPeriodicSRSposResourcesPerSlot-r17 ENUMERATED {n1, n2, n3, n4, n5, n6, n8, n10, n12, n14} OPTIONAL,
differentNumerologyBetweenSRSposAndInitialBWP-r17 ENUMERATED {supported} OPTIONAL,
srsPosWithoutRestrictionOnBWP-r17 ENUMERATED {supported} OPTIONAL,
maxNumOfPeriodicAndSemipersistentSRSposResources-r17 ENUMERATED {n1, n2, n4, n8, n16, n32, n64} OPTIONAL,
maxNumOfPeriodicAndSemipersistentSRSposResourcesPerSlot-r17 ENUMERATED {n1, n2, n3, n4, n5, n6, n8, n10, n12, n14} OPTIONAL,
differentCenterFreqBetweenSRSposAndInitialBWP-r17 ENUMERATED {supported} OPTIONAL,
switchingTimeSRS-TX-OtherTX-r17 ENUMERATED {us100, us140, us200, us300, us500} OPTIONAL,
-- R1 27-15c: Support of positioning SRS transmission in RRC_INACTIVE state outside initial BWP with semi-persistent SRS
maxNumOfSemiPersistentSRSposResources-r17 ENUMERATED {n1, n2, n4, n8, n16, n32, n64} OPTIONAL,
maxNumOfSemiPersistentSRSposResourcesPerSlot-r17 ENUMERATED {n1, n2, n3, n4, n5, n6, n8, n10, n12, n14} OPTIONAL,
...
}
-- TAG-POSSRS-RRC-INACTIVE-OUTSIDEINITIALUL-BWP-STOP
-- ASN1STOP
– PosSRS-TxFrequencyHoppingRRC-Connected
The IE PosSRS-TxFrequencyHoppingRRC-Connected is used to convey the capabilities supported by the RRC_CONNECTED UE for support of positioning SRS with Tx frequency hopping for RedCap UEs.
PosSRS-TxFrequencyHoppingRRC-Connected information element
-- ASN1START
-- TAG-POSSRS-TXFREQUENCYHOPPINGRRCCONNECTED-START
PosSRS-TxFrequencyHoppingRRC-Connected-r18 ::= SEQUENCE {
maximumSRS-BandwidthAcrossAllHopsFR1-r18 ENUMERATED {mhz40, mhz50, mhz80, mhz100} OPTIONAL,
maximumSRS-BandwidthAcrossAllHopsFR2-r18 ENUMERATED {mhz100, mhz200, mhz400} OPTIONAL,
maximumTxFH-Hops-r18 ENUMERATED {n2, n3, n4, n5, n6} OPTIONAL,
rf-TxRetuneTimeFR1-r18 ENUMERATED {n70, n140, n210} OPTIONAL,
rf-TxRetuneTimeFR2-r18 ENUMERATED {n35, n70, n140} OPTIONAL,
switchTimeBetweenActiveBWP-FrequencyHop-r18 ENUMERATED {n100, n140, n200, n300, n500} OPTIONAL,
numOfOverlappingPRB-r18 ENUMERATED {n0, n1, n2, n4} OPTIONAL,
maximumSRS-ResourcePeriodic-r18 ENUMERATED {n1, n2, n4, n8, n16, n32, n64} OPTIONAL,
maximumSRS-ResourceAperiodic-r18 ENUMERATED {n0,n1, n2, n4, n8, n16, n32, n64} OPTIONAL,
maximumSRS-ResourceSemipersistent-r18 ENUMERATED {n0,n1, n2, n4, n8, n16, n32, n64} OPTIONAL,
...
}
-- TAG-POSSRS-TXFREQUENCYHOPPINGRRCCONNECTED-STOP
-- ASN1STOP
– PosSRS-TxFrequencyHoppingRRC-Inactive
The IE PosSRS-TxFrequencyHoppingRRC-Inactive is used to convey the capabilities supported by the RRC_INACTIVE UE for support of positioning SRS with Tx frequency hopping for RedCap UEs.
PosSRS-TxFrequencyHoppingRRC-Inactive information element
-- ASN1START
-- TAG-POSSRS-TXFREQUENCYHOPPINGRRCINACTIVE-START
PosSRS-TxFrequencyHoppingRRC-Inactive-r18 ::= SEQUENCE {
maximumSRS-BandwidthAcrossAllHops-FR1-r18 ENUMERATED {mhz40, mhz50, mhz80, mhz100} OPTIONAL,
maximumSRS-BandwidthAcrossAllHops-FR2-r18 ENUMERATED {mhz100, mhz200, mhz400} OPTIONAL,
maximumTxFH-Hops-r18 ENUMERATED {n2, n3, n4, n5, n6} OPTIONAL,
rf-TxRetuneTimeFR1-r18 ENUMERATED {n70, n140, n210} OPTIONAL,
rf-TxRetuneTimeFR2-r18 ENUMERATED {n35, n70, n140} OPTIONAL,
switchTimeBetweenActiveBWP-FrequencyHop ENUMERATED {n100, n140, n200, n300, n500} OPTIONAL,
numOfOverlappingPRB-r18 ENUMERATED {n0, n1, n2, n4} OPTIONAL,
maximumSRS-Resource-Periodic-r18 ENUMERATED {n1, n2, n4, n8, n16, n32, n64} OPTIONAL,
maximumSRS-Resource-Semipersistent-r18 ENUMERATED {n0, n1, n2, n4, n8, n16, n32, n64} OPTIONAL,
...
}
-- TAG-POSSRS-TXFREQUENCYHOPPINGRRCCINACTIVE-STOP
-- ASN1STOP
– PowSav-Parameters
The IE PowSav-Parameters is used to convey the capabilities supported by the UE for the power saving preferences.
PowSav-Parameters information element
-- ASN1START
-- TAG-POWSAV-PARAMETERS-START
PowSav-Parameters-r16 ::= SEQUENCE {
powSav-ParametersCommon-r16 PowSav-ParametersCommon-r16 OPTIONAL,
powSav-ParametersFRX-Diff-r16 PowSav-ParametersFRX-Diff-r16 OPTIONAL,
...
}
PowSav-Parameters-v1700 ::= SEQUENCE {
powSav-ParametersFR2-2-r17 PowSav-ParametersFR2-2-r17 OPTIONAL,
...
}
PowSav-ParametersCommon-r16 ::= SEQUENCE {
drx-Preference-r16 ENUMERATED {supported} OPTIONAL,
maxCC-Preference-r16 ENUMERATED {supported} OPTIONAL,
releasePreference-r16 ENUMERATED {supported} OPTIONAL,
-- R1 19-4a: UE assistance information
minSchedulingOffsetPreference-r16 ENUMERATED {supported} OPTIONAL,
...
}
PowSav-ParametersFRX-Diff-r16 ::= SEQUENCE {
maxBW-Preference-r16 ENUMERATED {supported} OPTIONAL,
maxMIMO-LayerPreference-r16 ENUMERATED {supported} OPTIONAL,
...
}
PowSav-ParametersFR2-2-r17 ::= SEQUENCE {
maxBW-Preference-r17 ENUMERATED {supported} OPTIONAL,
maxMIMO-LayerPreference-r17 ENUMERATED {supported} OPTIONAL,
...
}
-- TAG-POWSAV-PARAMETERS-STOP
-- ASN1STOP
– ProcessingParameters
The IE ProcessingParameters is used to indicate PDSCH/PUSCH processing capabilities supported by the UE.
ProcessingParameters information element
-- ASN1START
-- TAG-PROCESSINGPARAMETERS-START
ProcessingParameters ::= SEQUENCE {
fallback ENUMERATED {sc, cap1-only},
differentTB-PerSlot SEQUENCE {
upto1 NumberOfCarriers OPTIONAL,
upto2 NumberOfCarriers OPTIONAL,
upto4 NumberOfCarriers OPTIONAL,
upto7 NumberOfCarriers OPTIONAL
} OPTIONAL
}
NumberOfCarriers ::= INTEGER (1..16)
-- TAG-PROCESSINGPARAMETERS-STOP
-- ASN1STOP
– PRS-ProcessingCapabilityOutsideMGinPPWperType
The IE PRS-ProcessingCapabilityOutsideMGinPPWperType is used to indicate DL PRS Processing Capability outside MG capabilities supported by the UE.
PRS-ProcessingCapabilityOutsideMGinPPWperType information element
-- ASN1START
-- TAG-PRS-PROCESSINGCAPABILITYOUTSIDEMGINPPWPERType-START
PRS-ProcessingCapabilityOutsideMGinPPWperType-r17 ::= SEQUENCE {
prsProcessingType-r17 ENUMERATED {type1A, type1B, type2},
ppw-dl-PRS-BufferType-r17 ENUMERATED {type1, type2, ...},
ppw-durationOfPRS-Processing-r17 CHOICE {
ppw-durationOfPRS-Processing1-r17 SEQUENCE {
ppw-durationOfPRS-ProcessingSymbolsN-r17 ENUMERATED {msDot125, msDot25, msDot5, ms1, ms2, ms4, ms6, ms8, ms12,
ms16, ms20, ms25, ms30, ms32, ms35, ms40, ms45, ms50},
ppw-durationOfPRS-ProcessingSymbolsT-r17 ENUMERATED {ms1, ms2, ms4, ms8, ms16, ms20, ms30, ms40, ms80,
ms160, ms320, ms640, ms1280}
},
ppw-durationOfPRS-Processing2-r17 SEQUENCE {
ppw-durationOfPRS-ProcessingSymbolsN2-r17 ENUMERATED {msDot125, msDot25, msDot5, ms1, ms2, ms3, ms4, ms5,
ms6, ms8, ms12},
ppw-durationOfPRS-ProcessingSymbolsT2-r17 ENUMERATED {ms4, ms5, ms6, ms8}
}
} OPTIONAL,
ppw-maxNumOfDL-PRS-ResProcessedPerSlot-r17 SEQUENCE {
scs15-r17 ENUMERATED {n1, n2, n4, n6, n8, n12, n16, n24, n32, n48, n64} OPTIONAL,
scs30-r17 ENUMERATED {n1, n2, n4, n6, n8, n12, n16, n24, n32, n48, n64} OPTIONAL,
scs60-r17 ENUMERATED {n1, n2, n4, n6, n8, n12, n16, n24, n32, n48, n64} OPTIONAL,
scs120-r17 ENUMERATED {n1, n2, n4, n6, n8, n12, n16, n24, n32, n48, n64} OPTIONAL,
...
},
ppw-maxNumOfDL-Bandwidth-r17 CHOICE {
fr1-r17 ENUMERATED {mhz5, mhz10, mhz20, mhz40, mhz50, mhz80, mhz100},
fr2-r17 ENUMERATED {mhz50, mhz100, mhz200, mhz400}
} OPTIONAL
}
-- TAG-PRS-PROCESSINGCAPABILITYOUTSIDEMGINPPWPERType-STOP
-- ASN1STOP
– RAT-Type
The IE RAT-Type is used to indicate the radio access technology (RAT), including NR, of the requested/transferred UE capabilities.
RAT-Type information element
-- ASN1START
-- TAG-RAT-TYPE-START
RAT-Type ::= ENUMERATED {nr, eutra-nr, eutra, utra-fdd-v1610, ...}
-- TAG-RAT-TYPE-STOP
-- ASN1STOP
– RedCapParameters
The IE RedCapParameters is used to indicate the UE capabilities supported by RedCap UEs.
RedCapParameters information element
-- ASN1START
-- TAG-REDCAPPARAMETERS-START
RedCapParameters-r17::= SEQUENCE {
-- R1 28-1: RedCap UE
supportOfRedCap-r17 ENUMERATED {supported} OPTIONAL,
supportOf16DRB-RedCap-r17 ENUMERATED {supported} OPTIONAL
}
RedCapParameters-v1740::= SEQUENCE {
ncd-SSB-ForRedCapInitialBWP-SDT-r17 ENUMERATED {supported} OPTIONAL
}
-- TAG-REDCAPPARAMETERS-STOP
-- ASN1STOP
– RF-Parameters
The IE RF-Parameters is used to convey RF-related capabilities for NR operation.
RF-Parameters information element
-- ASN1START
-- TAG-RF-PARAMETERS-START
RF-Parameters ::= SEQUENCE {
supportedBandListNR SEQUENCE (SIZE (1..maxBands)) OF BandNR,
supportedBandCombinationList BandCombinationList OPTIONAL,
appliedFreqBandListFilter FreqBandList OPTIONAL,
...,
[[
supportedBandCombinationList-v1540 BandCombinationList-v1540 OPTIONAL,
srs-SwitchingTimeRequested ENUMERATED {true} OPTIONAL
]],
[[
supportedBandCombinationList-v1550 BandCombinationList-v1550 OPTIONAL
]],
[[
supportedBandCombinationList-v1560 BandCombinationList-v1560 OPTIONAL
]],
[[
supportedBandCombinationList-v1610 BandCombinationList-v1610 OPTIONAL,
supportedBandCombinationListSidelinkEUTRA-NR-r16 BandCombinationListSidelinkEUTRA-NR-r16 OPTIONAL,
supportedBandCombinationList-UplinkTxSwitch-r16 BandCombinationList-UplinkTxSwitch-r16 OPTIONAL
]],
[[
supportedBandCombinationList-v1630 BandCombinationList-v1630 OPTIONAL,
supportedBandCombinationListSidelinkEUTRA-NR-v1630 BandCombinationListSidelinkEUTRA-NR-v1630 OPTIONAL,
supportedBandCombinationList-UplinkTxSwitch-v1630 BandCombinationList-UplinkTxSwitch-v1630 OPTIONAL
]],
[[
supportedBandCombinationList-v1640 BandCombinationList-v1640 OPTIONAL,
supportedBandCombinationList-UplinkTxSwitch-v1640 BandCombinationList-UplinkTxSwitch-v1640 OPTIONAL
]],
[[
supportedBandCombinationList-v1650 BandCombinationList-v1650 OPTIONAL,
supportedBandCombinationList-UplinkTxSwitch-v1650 BandCombinationList-UplinkTxSwitch-v1650 OPTIONAL
]],
[[
extendedBand-n77-r16 ENUMERATED {supported} OPTIONAL
]],
[[
supportedBandCombinationList-UplinkTxSwitch-v1670 BandCombinationList-UplinkTxSwitch-v1670 OPTIONAL
]],
[[
supportedBandCombinationList-v1680 BandCombinationList-v1680 OPTIONAL
]],
[[
supportedBandCombinationList-v1690 BandCombinationList-v1690 OPTIONAL,
supportedBandCombinationList-UplinkTxSwitch-v1690 BandCombinationList-UplinkTxSwitch-v1690 OPTIONAL
]],
[[
supportedBandCombinationList-v1700 BandCombinationList-v1700 OPTIONAL,
supportedBandCombinationList-UplinkTxSwitch-v1700 BandCombinationList-UplinkTxSwitch-v1700 OPTIONAL,
supportedBandCombinationListSL-RelayDiscovery-r17 OCTET STRING OPTIONAL, -- Contains PC5 BandCombinationListSidelinkNR-r16
supportedBandCombinationListSL-NonRelayDiscovery-r17 OCTET STRING OPTIONAL, -- Contains PC5 BandCombinationListSidelinkNR-r16
supportedBandCombinationListSidelinkEUTRA-NR-v1710 BandCombinationListSidelinkEUTRA-NR-v1710 OPTIONAL,
sidelinkRequested-r17 ENUMERATED {true} OPTIONAL,
extendedBand-n77-2-r17 ENUMERATED {supported} OPTIONAL
]],
[[
supportedBandCombinationList-v1720 BandCombinationList-v1720 OPTIONAL,
supportedBandCombinationList-UplinkTxSwitch-v1720 BandCombinationList-UplinkTxSwitch-v1720 OPTIONAL
]],
[[
supportedBandCombinationList-v1730 BandCombinationList-v1730 OPTIONAL,
supportedBandCombinationList-UplinkTxSwitch-v1730 BandCombinationList-UplinkTxSwitch-v1730 OPTIONAL,
supportedBandCombinationListSL-RelayDiscovery-v1730 BandCombinationListSL-Discovery-r17 OPTIONAL,
supportedBandCombinationListSL-NonRelayDiscovery-v1730 BandCombinationListSL-Discovery-r17 OPTIONAL
]],
[[
supportedBandCombinationList-v1740 BandCombinationList-v1740 OPTIONAL,
supportedBandCombinationList-UplinkTxSwitch-v1740 BandCombinationList-UplinkTxSwitch-v1740 OPTIONAL
]],
[[
supportedBandCombinationList-v1760 BandCombinationList-v1760 OPTIONAL,
supportedBandCombinationList-UplinkTxSwitch-v1760 BandCombinationList-UplinkTxSwitch-v1760 OPTIONAL
]],
[[
dummy1 BandCombinationList-v1770 OPTIONAL,
dummy2 BandCombinationList-UplinkTxSwitch-v1770 OPTIONAL
]],
[[
supportedBandCombinationList-v1780 BandCombinationList-v1780 OPTIONAL,
supportedBandCombinationList-UplinkTxSwitch-v1780 BandCombinationList-UplinkTxSwitch-v1780 OPTIONAL
]],
[[
supportedBandCombinationList-v1800 BandCombinationList-v1800 OPTIONAL,
supportedBandCombinationList-UplinkTxSwitch-v1800 BandCombinationList-UplinkTxSwitch-v1800 OPTIONAL,
supportedBandCombinationListSL-U2U-Relay-r18 SEQUENCE {
supportedBandCombinationListSL-U2U-RelayDiscovery-r18 OCTET STRING OPTIONAL, -- Contains PC5
-- BandCombinationListSidelinkNR-r16
supportedBandCombinationListSL-U2U-DiscoveryExt BandCombinationListSL-Discovery-r17 OPTIONAL
} OPTIONAL
]],
[[
supportedBandCombinationList-v1830 BandCombinationList-v1830 OPTIONAL,
supportedBandCombinationList-UplinkTxSwitch-v1830 BandCombinationList-UplinkTxSwitch-v1830 OPTIONAL
]],
[[
supportedBandCombinationList-v1840 BandCombinationList-v1840 OPTIONAL,
supportedBandCombinationList-UplinkTxSwitch-v1840 BandCombinationList-UplinkTxSwitch-v1840 OPTIONAL
]]
}
RF-Parameters-v15g0 ::= SEQUENCE {
supportedBandCombinationList-v15g0 BandCombinationList-v15g0 OPTIONAL
}
RF-Parameters-v16a0 ::= SEQUENCE {
supportedBandCombinationList-v16a0 BandCombinationList-v16a0 OPTIONAL,
supportedBandCombinationList-UplinkTxSwitch-v16a0 BandCombinationList-UplinkTxSwitch-v16a0 OPTIONAL
}
RF-Parameters-v16c0 ::= SEQUENCE {
supportedBandListNR-v16c0 SEQUENCE (SIZE (1..maxBands)) OF BandNR-v16c0
}
RF-Parameters-v16j0 ::= SEQUENCE {
supportedBandCombinationList-v16j0 BandCombinationList-v16j0 OPTIONAL,
supportedBandCombinationList-UplinkTxSwitch-v16j0 BandCombinationList-UplinkTxSwitch-v16j0 OPTIONAL
}
RF-Parameters-v17b0 ::= SEQUENCE {
supportedBandListNR-v17b0 SEQUENCE (SIZE (1..maxBands)) OF BandNR-v17b0 OPTIONAL,
supportedBandCombinationList-v17b0 BandCombinationList-v17b0 OPTIONAL,
supportedBandCombinationList-UplinkTxSwitch-v17b0 BandCombinationList-UplinkTxSwitch-v17b0 OPTIONAL
}
BandNR ::= SEQUENCE {
bandNR FreqBandIndicatorNR,
modifiedMPR-Behaviour BIT STRING (SIZE (8)) OPTIONAL,
mimo-ParametersPerBand MIMO-ParametersPerBand OPTIONAL,
extendedCP ENUMERATED {supported} OPTIONAL,
multipleTCI ENUMERATED {supported} OPTIONAL,
bwp-WithoutRestriction ENUMERATED {supported} OPTIONAL,
bwp-SameNumerology ENUMERATED {upto2, upto4} OPTIONAL,
bwp-DiffNumerology ENUMERATED {upto4} OPTIONAL,
crossCarrierScheduling-SameSCS ENUMERATED {supported} OPTIONAL,
pdsch-256QAM-FR2 ENUMERATED {supported} OPTIONAL,
pusch-256QAM ENUMERATED {supported} OPTIONAL,
ue-PowerClass ENUMERATED {pc1, pc2, pc3, pc4} OPTIONAL,
rateMatchingLTE-CRS ENUMERATED {supported} OPTIONAL,
channelBWs-DL CHOICE {
fr1 SEQUENCE {
scs-15kHz BIT STRING (SIZE (10)) OPTIONAL,
scs-30kHz BIT STRING (SIZE (10)) OPTIONAL,
scs-60kHz BIT STRING (SIZE (10)) OPTIONAL
},
fr2 SEQUENCE {
scs-60kHz BIT STRING (SIZE (3)) OPTIONAL,
scs-120kHz BIT STRING (SIZE (3)) OPTIONAL
}
} OPTIONAL,
channelBWs-UL CHOICE {
fr1 SEQUENCE {
scs-15kHz BIT STRING (SIZE (10)) OPTIONAL,
scs-30kHz BIT STRING (SIZE (10)) OPTIONAL,
scs-60kHz BIT STRING (SIZE (10)) OPTIONAL
},
fr2 SEQUENCE {
scs-60kHz BIT STRING (SIZE (3)) OPTIONAL,
scs-120kHz BIT STRING (SIZE (3)) OPTIONAL
}
} OPTIONAL,
...,
[[
maxUplinkDutyCycle-PC2-FR1 ENUMERATED {n60, n70, n80, n90, n100} OPTIONAL
]],
[[
pucch-SpatialRelInfoMAC-CE ENUMERATED {supported} OPTIONAL,
powerBoosting-pi2BPSK ENUMERATED {supported} OPTIONAL
]],
[[
maxUplinkDutyCycle-FR2 ENUMERATED {n15, n20, n25, n30, n40, n50, n60, n70, n80, n90, n100} OPTIONAL
]],
[[
channelBWs-DL-v1590 CHOICE {
fr1 SEQUENCE {
scs-15kHz BIT STRING (SIZE (16)) OPTIONAL,
scs-30kHz BIT STRING (SIZE (16)) OPTIONAL,
scs-60kHz BIT STRING (SIZE (16)) OPTIONAL
},
fr2 SEQUENCE {
scs-60kHz BIT STRING (SIZE (8)) OPTIONAL,
scs-120kHz BIT STRING (SIZE (8)) OPTIONAL
}
} OPTIONAL,
channelBWs-UL-v1590 CHOICE {
fr1 SEQUENCE {
scs-15kHz BIT STRING (SIZE (16)) OPTIONAL,
scs-30kHz BIT STRING (SIZE (16)) OPTIONAL,
scs-60kHz BIT STRING (SIZE (16)) OPTIONAL
},
fr2 SEQUENCE {
scs-60kHz BIT STRING (SIZE (8)) OPTIONAL,
scs-120kHz BIT STRING (SIZE (8)) OPTIONAL
}
} OPTIONAL
]],
[[
asymmetricBandwidthCombinationSet BIT STRING (SIZE (1..32)) OPTIONAL
]],
[[
-- R1 10: NR-unlicensed
sharedSpectrumChAccessParamsPerBand-r16 SharedSpectrumChAccessParamsPerBand-r16 OPTIONAL,
-- R1 11-7b: Independent cancellation of the overlapping PUSCHs in an intra-band UL CA
cancelOverlappingPUSCH-r16 ENUMERATED {supported} OPTIONAL,
-- R1 14-1: Multiple LTE-CRS rate matching patterns
multipleRateMatchingEUTRA-CRS-r16 SEQUENCE {
maxNumberPatterns-r16 INTEGER (2..6),
maxNumberNon-OverlapPatterns-r16 INTEGER (1..3)
} OPTIONAL,
-- R1 14-1a: Two LTE-CRS overlapping rate matching patterns within a part of NR carrier using 15 kHz overlapping with a LTE carrier
overlapRateMatchingEUTRA-CRS-r16 ENUMERATED {supported} OPTIONAL,
-- R1 14-2: PDSCH Type B mapping of length 9 and 10 OFDM symbols
pdsch-MappingTypeB-Alt-r16 ENUMERATED {supported} OPTIONAL,
-- R1 14-3: One slot periodic TRS configuration for FR1
oneSlotPeriodicTRS-r16 ENUMERATED {supported} OPTIONAL,
olpc-SRS-Pos-r16 OLPC-SRS-Pos-r16 OPTIONAL,
spatialRelationsSRS-Pos-r16 SpatialRelationsSRS-Pos-r16 OPTIONAL,
simulSRS-MIMO-TransWithinBand-r16 ENUMERATED {n2} OPTIONAL,
channelBW-DL-IAB-r16 CHOICE {
fr1-100mhz SEQUENCE {
scs-15kHz ENUMERATED {supported} OPTIONAL,
scs-30kHz ENUMERATED {supported} OPTIONAL,
scs-60kHz ENUMERATED {supported} OPTIONAL
},
fr2-200mhz SEQUENCE {
scs-60kHz ENUMERATED {supported} OPTIONAL,
scs-120kHz ENUMERATED {supported} OPTIONAL
}
} OPTIONAL,
channelBW-UL-IAB-r16 CHOICE {
fr1-100mhz SEQUENCE {
scs-15kHz ENUMERATED {supported} OPTIONAL,
scs-30kHz ENUMERATED {supported} OPTIONAL,
scs-60kHz ENUMERATED {supported} OPTIONAL
},
fr2-200mhz SEQUENCE {
scs-60kHz ENUMERATED {supported} OPTIONAL,
scs-120kHz ENUMERATED {supported} OPTIONAL
}
} OPTIONAL,
rasterShift7dot5-IAB-r16 ENUMERATED {supported} OPTIONAL,
ue-PowerClass-v1610 ENUMERATED {pc1dot5} OPTIONAL,
condHandover-r16 ENUMERATED {supported} OPTIONAL,
condHandoverFailure-r16 ENUMERATED {supported} OPTIONAL,
condHandoverTwoTriggerEvents-r16 ENUMERATED {supported} OPTIONAL,
condPSCellChange-r16 ENUMERATED {supported} OPTIONAL,
condPSCellChangeTwoTriggerEvents-r16 ENUMERATED {supported} OPTIONAL,
mpr-PowerBoost-FR2-r16 ENUMERATED {supported} OPTIONAL,
-- R1 11-9: Multiple active configured grant configurations for a BWP of a serving cell
activeConfiguredGrant-r16 SEQUENCE {
maxNumberConfigsPerBWP-r16 ENUMERATED {n1, n2, n4, n8, n12},
maxNumberConfigsAllCC-r16 INTEGER (2..32)
} OPTIONAL,
-- R1 11-9a: Joint release in a DCI for two or more configured grant Type 2 configurations for a given BWP of a serving cell
jointReleaseConfiguredGrantType2-r16 ENUMERATED {supported} OPTIONAL,
-- R1 12-2: Multiple SPS configurations
sps-r16 SEQUENCE {
maxNumberConfigsPerBWP-r16 INTEGER (1..8),
maxNumberConfigsAllCC-r16 INTEGER (2..32)
} OPTIONAL,
-- R1 12-2a: Joint release in a DCI for two or more SPS configurations for a given BWP of a serving cell
jointReleaseSPS-r16 ENUMERATED {supported} OPTIONAL,
-- R1 13-19: Simultaneous positioning SRS and MIMO SRS transmission within a band across multiple CCs
simulSRS-TransWithinBand-r16 ENUMERATED {n2} OPTIONAL,
trs-AdditionalBandwidth-r16 ENUMERATED {trs-AddBW-Set1, trs-AddBW-Set2} OPTIONAL,
handoverIntraF-IAB-r16 ENUMERATED {supported} OPTIONAL
]],
[[
-- R1 22-5a: Simultaneous transmission of SRS for antenna switching and SRS for CB/NCB /BM for intra-band UL CA
-- R1 22-5c: Simultaneous transmission of SRS for antenna switching and SRS for antenna switching for intra-band UL CA
simulTX-SRS-AntSwitchingIntraBandUL-CA-r16 SimulSRS-ForAntennaSwitching-r16 OPTIONAL,
-- R1 10: NR-unlicensed
sharedSpectrumChAccessParamsPerBand-v1630 SharedSpectrumChAccessParamsPerBand-v1630 OPTIONAL
]],
[[
handoverUTRA-FDD-r16 ENUMERATED {supported} OPTIONAL,
-- R4 7-4: Report the shorter transient capability supported by the UE: 2, 4 or 7us
enhancedUL-TransientPeriod-r16 ENUMERATED {us2, us4, us7} OPTIONAL,
sharedSpectrumChAccessParamsPerBand-v1640 SharedSpectrumChAccessParamsPerBand-v1640 OPTIONAL
]],
[[
type1-PUSCH-RepetitionMultiSlots-v1650 ENUMERATED {supported} OPTIONAL,
type2-PUSCH-RepetitionMultiSlots-v1650 ENUMERATED {supported} OPTIONAL,
pusch-RepetitionMultiSlots-v1650 ENUMERATED {supported} OPTIONAL,
configuredUL-GrantType1-v1650 ENUMERATED {supported} OPTIONAL,
configuredUL-GrantType2-v1650 ENUMERATED {supported} OPTIONAL,
sharedSpectrumChAccessParamsPerBand-v1650 SharedSpectrumChAccessParamsPerBand-v1650 OPTIONAL
]],
[[
enhancedSkipUplinkTxConfigured-v1660 ENUMERATED {supported} OPTIONAL,
enhancedSkipUplinkTxDynamic-v1660 ENUMERATED {supported} OPTIONAL
]],
[[
maxUplinkDutyCycle-PC1dot5-MPE-FR1-r16 ENUMERATED {n10, n15, n20, n25, n30, n40, n50, n60, n70, n80, n90, n100} OPTIONAL,
txDiversity-r16 ENUMERATED {supported} OPTIONAL
]],
[[
-- R1 36-1: Support of 1024QAM for PDSCH for FR1
pdsch-1024QAM-FR1-r17 ENUMERATED {supported} OPTIONAL,
-- R4 22-1 support of FR2 HST operation
ue-PowerClass-v1700 ENUMERATED {pc5, pc6, pc7} OPTIONAL,
-- R1 24: NR extension to 71GHz (FR2-2)
fr2-2-AccessParamsPerBand-r17 FR2-2-AccessParamsPerBand-r17 OPTIONAL,
rlm-Relaxation-r17 ENUMERATED {supported} OPTIONAL,
bfd-Relaxation-r17 ENUMERATED {supported} OPTIONAL,
cg-SDT-r17 ENUMERATED {supported} OPTIONAL,
locationBasedCondHandover-r17 ENUMERATED {supported} OPTIONAL,
timeBasedCondHandover-r17 ENUMERATED {supported} OPTIONAL,
eventA4BasedCondHandover-r17 ENUMERATED {supported} OPTIONAL,
mn-InitiatedCondPSCellChangeNRDC-r17 ENUMERATED {supported} OPTIONAL,
sn-InitiatedCondPSCellChangeNRDC-r17 ENUMERATED {supported} OPTIONAL,
-- R1 29-3a: PDCCH skipping
pdcch-SkippingWithoutSSSG-r17 ENUMERATED {supported} OPTIONAL,
-- R1 29-3b: 2 search space sets group switching
sssg-Switching-1BitInd-r17 ENUMERATED {supported} OPTIONAL,
-- R1 29-3c: 3 search space sets group switching
sssg-Switching-2BitInd-r17 ENUMERATED {supported} OPTIONAL,
-- R1 29-3d: 2 search space sets group switching with PDCCH skipping
pdcch-SkippingWithSSSG-r17 ENUMERATED {supported} OPTIONAL,
-- R1 29-3e: Support Search space set group switching capability 2 for FR1
searchSpaceSetGrp-switchCap2-r17 ENUMERATED {supported} OPTIONAL,
-- R1 26-1: Uplink Time and Frequency pre-compensation and timing relationship enhancements
uplinkPreCompensation-r17 ENUMERATED {supported} OPTIONAL,
-- R1 26-4: UE reporting of information related to TA pre-compensation
uplink-TA-Reporting-r17 ENUMERATED {supported} OPTIONAL,
-- R1 26-5: Increasing the number of HARQ processes
max-HARQ-ProcessNumber-r17 ENUMERATED {u16d32, u32d16, u32d32} OPTIONAL,
-- R1 26-6: Type-2 HARQ codebook enhancement
type2-HARQ-Codebook-r17 ENUMERATED {supported} OPTIONAL,
-- R1 26-6a: Type-1 HARQ codebook enhancement
type1-HARQ-Codebook-r17 ENUMERATED {supported} OPTIONAL,
-- R1 26-6b: Type-3 HARQ codebook enhancement
type3-HARQ-Codebook-r17 ENUMERATED {supported} OPTIONAL,
-- R1 26-9: UE-specific K_offset
ue-specific-K-Offset-r17 ENUMERATED {supported} OPTIONAL,
-- R1 24-1f: Multiple PDSCH scheduling by single DCI for 120kHz in FR2-1
multiPDSCH-SingleDCI-FR2-1-SCS-120kHz-r17 ENUMERATED {supported} OPTIONAL,
-- R1 24-1g: Multiple PUSCH scheduling by single DCI for 120kHz in FR2-1
multiPUSCH-SingleDCI-FR2-1-SCS-120kHz-r17 ENUMERATED {supported} OPTIONAL,
-- R4 14-4: Parallel PRS measurements in RRC_INACTIVE state, FR1/FR2 diff
parallelPRS-MeasRRC-Inactive-r17 ENUMERATED {supported} OPTIONAL,
-- R1 27-1-2: Support of UE-TxTEGs for UL TDOA
nr-UE-TxTEG-ID-MaxSupport-r17 ENUMERATED {n1, n2, n3, n4, n6, n8} OPTIONAL,
-- R1 27-17: PRS processing in RRC_INACTIVE
prs-ProcessingRRC-Inactive-r17 ENUMERATED {supported} OPTIONAL,
-- R1 27-3-2: DL PRS measurement outside MG and in a PRS processing window
prs-ProcessingWindowType1A-r17 ENUMERATED {option1, option2, option3} OPTIONAL,
prs-ProcessingWindowType1B-r17 ENUMERATED {option1, option2, option3} OPTIONAL,
prs-ProcessingWindowType2-r17 ENUMERATED {option1, option2, option3} OPTIONAL,
-- R1 27-15: Positioning SRS transmission in RRC_INACTIVE state for initial UL BWP
srs-AllPosResourcesRRC-Inactive-r17 SRS-AllPosResourcesRRC-Inactive-r17 OPTIONAL,
-- R1 27-16: OLPC for positioning SRS in RRC_INACTIVE state - gNB
olpc-SRS-PosRRC-Inactive-r17 OLPC-SRS-Pos-r16 OPTIONAL,
-- R1 27-19: Spatial relation for positioning SRS in RRC_INACTIVE state - gNB
spatialRelationsSRS-PosRRC-Inactive-r17 SpatialRelationsSRS-Pos-r16 OPTIONAL,
-- R1 30-1: Increased maximum number of PUSCH Type A repetitions
maxNumberPUSCH-TypeA-Repetition-r17 ENUMERATED {supported} OPTIONAL,
-- R1 30-2: PUSCH Type A repetitions based on available slots
puschTypeA-RepetitionsAvailSlot-r17 ENUMERATED {supported} OPTIONAL,
-- R1 30-3: TB processing over multi-slot PUSCH
tb-ProcessingMultiSlotPUSCH-r17 ENUMERATED {supported} OPTIONAL,
-- R1 30-3a: Repetition of TB processing over multi-slot PUSCH
tb-ProcessingRepMultiSlotPUSCH-r17 ENUMERATED {supported} OPTIONAL,
-- R1 30-4: The maximum duration for DM-RS bundling
maxDurationDMRS-Bundling-r17 SEQUENCE {
fdd-r17 ENUMERATED {n4, n8, n16, n32} OPTIONAL,
tdd-r17 ENUMERATED {n2, n4, n8, n16} OPTIONAL
} OPTIONAL,
-- R1 30-6: Repetition of PUSCH transmission scheduled by RAR UL grant and DCI format 0_0 with CRC scrambled by TC-RNTI
pusch-RepetitionMsg3-r17 ENUMERATED {supported} OPTIONAL,
sharedSpectrumChAccessParamsPerBand-v1710 SharedSpectrumChAccessParamsPerBand-v1710 OPTIONAL,
-- R4 25-2: Parallel measurements on cells belonging to a different NGSO satellite than a serving satellite without scheduling restrictions
-- on normal operations with the serving cell
parallelMeasurementWithoutRestriction-r17 ENUMERATED {supported} OPTIONAL,
-- R4 25-5: Parallel measurements on multiple NGSO satellites within a SMTC
maxNumber-NGSO-SatellitesWithinOneSMTC-r17 ENUMERATED {n1, n2, n3, n4} OPTIONAL,
-- R1 26-10: K1 range extension
k1-RangeExtension-r17 ENUMERATED {supported} OPTIONAL,
-- R1 35-1: Aperiodic CSI-RS for tracking for fast SCell activation
aperiodicCSI-RS-FastScellActivation-r17 SEQUENCE {
maxNumberAperiodicCSI-RS-PerCC-r17 ENUMERATED {n8, n16, n32, n48, n64, n128, n255},
maxNumberAperiodicCSI-RS-AcrossCCs-r17 ENUMERATED {n8, n16, n32, n64, n128, n256, n512, n1024}
} OPTIONAL,
-- R1 35-2: Aperiodic CSI-RS bandwidth for tracking for fast SCell activation for 10MHz UE channel bandwidth
aperiodicCSI-RS-AdditionalBandwidth-r17 ENUMERATED {addBW-Set1, addBW-Set2} OPTIONAL,
-- R1 28-1a: RRC-configured DL BWP without CD-SSB or NCD-SSB
bwp-WithoutCD-SSB-OrNCD-SSB-RedCap-r17 ENUMERATED {supported} OPTIONAL,
-- R1 28-3: Half-duplex FDD operation type A for (e)RedCap UE
halfDuplexFDD-TypeA-RedCap-r17 ENUMERATED {supported} OPTIONAL,
-- R1 27-15b: Positioning SRS transmission in RRC_INACTIVE state configured outside initial UL BWP
posSRS-RRC-Inactive-OutsideInitialUL-BWP-r17 PosSRS-RRC-Inactive-OutsideInitialUL-BWP-r17 OPTIONAL,
-- R4 15-3 UE support of CBW for 480kHz SCS
channelBWs-DL-SCS-480kHz-FR2-2-r17 BIT STRING (SIZE (8)) OPTIONAL,
channelBWs-UL-SCS-480kHz-FR2-2-r17 BIT STRING (SIZE (8)) OPTIONAL,
-- R4 15-4 UE support of CBW for 960kHz SCS
channelBWs-DL-SCS-960kHz-FR2-2-r17 BIT STRING (SIZE (8)) OPTIONAL,
channelBWs-UL-SCS-960kHz-FR2-2-r17 BIT STRING (SIZE (8)) OPTIONAL,
-- R4 17-1 UL gap for Tx power management
ul-GapFR2-r17 ENUMERATED {supported} OPTIONAL,
-- R1 25-4: One-shot HARQ ACK feedback triggered by DCI format 1_2
oneShotHARQ-feedbackTriggeredByDCI-1-2-r17 ENUMERATED {supported} OPTIONAL,
-- R1 25-5: PHY priority handling for one-shot HARQ ACK feedback
oneShotHARQ-feedbackPhy-Priority-r17 ENUMERATED {supported} OPTIONAL,
-- R1 25-6: Enhanced type 3 HARQ-ACK codebook feedback
enhancedType3-HARQ-CodebookFeedback-r17 SEQUENCE {
enhancedType3-HARQ-Codebooks-r17 ENUMERATED {n1, n2, n4, n8},
maxNumberPUCCH-Transmissions-r17 ENUMERATED {n1, n2, n3, n4, n5, n6, n7}
} OPTIONAL,
-- R1 25-7: Triggered HARQ-ACK codebook re-transmission
triggeredHARQ-CodebookRetx-r17 SEQUENCE {
minHARQ-Retx-Offset-r17 ENUMERATED {n-7, n-5, n-3, n-1, n1},
maxHARQ-Retx-Offset-r17 ENUMERATED {n4, n6, n8, n10, n12, n14, n16, n18, n20, n22, n24}
} OPTIONAL
]],
[[
-- R4 22-2 support of one shot large UL timing adjustment
ue-OneShotUL-TimingAdj-r17 ENUMERATED {supported} OPTIONAL,
-- R1 25-2: Repetitions for PUCCH format 0, and 2 over multiple slots with K = 2, 4, 8
pucch-Repetition-F0-2-r17 ENUMERATED {supported} OPTIONAL,
-- R1 25-11a: 4-bits subband CQI for NTN and unlicensed
cqi-4-BitsSubbandNTN-SharedSpectrumChAccess-r17 ENUMERATED {supported} OPTIONAL,
-- R1 25-16: HARQ-ACK with different priorities multiplexing on a PUCCH/PUSCH
mux-HARQ-ACK-DiffPriorities-r17 ENUMERATED {supported} OPTIONAL,
-- R1 25-20a: Propagation delay compensation based on Rel-15 TA procedure for NTN and unlicensed
ta-BasedPDC-NTN-SharedSpectrumChAccess-r17 ENUMERATED {supported} OPTIONAL,
-- R1 33-2b: DCI-based enabling/disabling ACK/NACK-based feedback for dynamic scheduling for multicast
ack-NACK-FeedbackForMulticastWithDCI-Enabler-r17 ENUMERATED {supported} OPTIONAL,
-- R1 33-2e: Multiple G-RNTIs for group-common PDSCHs
maxNumberG-RNTI-r17 INTEGER (2..8) OPTIONAL,
-- R1 33-2f: Dynamic multicast with DCI format 4_2
dynamicMulticastDCI-Format4-2-r17 ENUMERATED {supported} OPTIONAL,
-- R1 33-2i: Supported maximal modulation order for multicast PDSCH
maxModulationOrderForMulticast-r17 CHOICE {
fr1-r17 ENUMERATED {qam256, qam1024},
fr2-r17 ENUMERATED {qam64, qam256}
} OPTIONAL,
-- R1 33-3-1: Dynamic Slot-level repetition for group-common PDSCH for TN and licensed
dynamicSlotRepetitionMulticastTN-NonSharedSpectrumChAccess-r17 ENUMERATED {n8, n16} OPTIONAL,
-- R1 33-3-1a: Dynamic Slot-level repetition for group-common PDSCH for NTN and unlicensed
dynamicSlotRepetitionMulticastNTN-SharedSpectrumChAccess-r17 ENUMERATED {n8, n16} OPTIONAL,
-- R1 33-4-1: DCI-based enabling/disabling NACK-only based feedback for dynamic scheduling for multicast
nack-OnlyFeedbackForMulticastWithDCI-Enabler-r17 ENUMERATED {supported} OPTIONAL,
-- R1 33-5-1b: DCI-based enabling/disabling ACK/NACK-based feedback for dynamic scheduling for multicast
ack-NACK-FeedbackForSPS-MulticastWithDCI-Enabler-r17 ENUMERATED {supported} OPTIONAL,
-- R1 33-5-1h: Multiple G-CS-RNTIs for SPS group-common PDSCHs
maxNumberG-CS-RNTI-r17 INTEGER (2..8) OPTIONAL,
-- R1 33-10: Support group-common PDSCH RE-level rate matching for multicast
re-LevelRateMatchingForMulticast-r17 ENUMERATED {supported} OPTIONAL,
-- R1 36-1a: Support of 1024QAM for PDSCH with maximum 2 MIMO layers for FR1
pdsch-1024QAM-2MIMO-FR1-r17 ENUMERATED {supported} OPTIONAL,
-- R4 14-3 PRS measurement without MG
prs-MeasurementWithoutMG-r17 ENUMERATED {cpLength, quarterSymbol, halfSymbol, halfSlot} OPTIONAL,
-- R4 25-7: The number of target NGSO satellites the UE can monitor per carrier
maxNumber-NGSO-SatellitesPerCarrier-r17 INTEGER (3..4) OPTIONAL,
-- R1 27-3-3 DL PRS Processing Capability outside MG - buffering capability
prs-ProcessingCapabilityOutsideMGinPPW-r17 SEQUENCE (SIZE(1..3)) OF PRS-ProcessingCapabilityOutsideMGinPPWperType-r17 OPTIONAL,
-- R1 27-15a: Positioning SRS transmission in RRC_INACTIVE state for initial UL BWP with semi-persistent SRS
srs-SemiPersistent-PosResourcesRRC-Inactive-r17 SEQUENCE {
maxNumOfSemiPersistentSRSposResources-r17 ENUMERATED {n1, n2, n4, n8, n16, n32, n64},
maxNumOfSemiPersistentSRSposResourcesPerSlot-r17 ENUMERATED {n1, n2, n3, n4, n5, n6, n8, n10, n12, n14}
} OPTIONAL,
-- R2: UE support of CBW for 120kHz SCS
channelBWs-DL-SCS-120kHz-FR2-2-r17 BIT STRING (SIZE (8)) OPTIONAL,
channelBWs-UL-SCS-120kHz-FR2-2-r17 BIT STRING (SIZE (8)) OPTIONAL
]],
[[
-- R1 30-4a: DM-RS bundling for PUSCH repetition type A
dmrs-BundlingPUSCH-RepTypeA-r17 ENUMERATED {supported} OPTIONAL,
-- R1 30-4b: DM-RS bundling for PUSCH repetition type B
dmrs-BundlingPUSCH-RepTypeB-r17 ENUMERATED {supported} OPTIONAL,
-- R1 30-4c: DM-RS bundling for TB processing over multi-slot PUSCH
dmrs-BundlingPUSCH-multiSlot-r17 ENUMERATED {supported} OPTIONAL,
-- R1 30-4d: DMRS bundling for PUCCH repetitions
dmrs-BundlingPUCCH-Rep-r17 ENUMERATED {supported} OPTIONAL,
-- R1 30-4e: Enhanced inter-slot frequency hopping with inter-slot bundling for PUSCH
interSlotFreqHopInterSlotBundlingPUSCH-r17 ENUMERATED {supported} OPTIONAL,
-- R1 30-4f: Enhanced inter-slot frequency hopping for PUCCH repetitions with DMRS bundling
interSlotFreqHopPUCCH-r17 ENUMERATED {supported} OPTIONAL,
-- R1 30-4g: Restart DM-RS bundling
dmrs-BundlingRestart-r17 ENUMERATED {supported} OPTIONAL,
-- R1 30-4h: DM-RS bundling for non-back-to-back transmission
dmrs-BundlingNonBackToBackTX-r17 ENUMERATED {supported} OPTIONAL
]],
[[
-- R1 33-5-1e: Dynamic Slot-level repetition for SPS group-common PDSCH for multicast
maxDynamicSlotRepetitionForSPS-Multicast-r17 ENUMERATED {n8, n16} OPTIONAL,
-- R1 33-5-1g: DCI-based enabling/disabling NACK-only based feedback for SPS group-common PDSCH for multicast
nack-OnlyFeedbackForSPS-MulticastWithDCI-Enabler-r17 ENUMERATED {supported} OPTIONAL,
-- R1 33-5-1i: Multicast SPS scheduling with DCI format 4_2
sps-MulticastDCI-Format4-2-r17 ENUMERATED {supported} OPTIONAL,
-- R1 33-5-2: Multiple SPS group-common PDSCH configuration on PCell
sps-MulticastMultiConfig-r17 INTEGER (1..8) OPTIONAL,
-- R1 33-6-1: DL priority indication for multicast in DCI
priorityIndicatorInDCI-Multicast-r17 ENUMERATED {supported} OPTIONAL,
-- R1 33-6-1a: DL priority configuration for SPS multicast
priorityIndicatorInDCI-SPS-Multicast-r17 ENUMERATED {supported} OPTIONAL,
-- R1 33-6-2: Two HARQ-ACK codebooks simultaneously constructed for supporting HARQ-ACK codebooks with different priorities
-- for unicast and multicast at a UE
twoHARQ-ACK-CodebookForUnicastAndMulticast-r17 ENUMERATED {supported} OPTIONAL,
-- R1 33-6-3: More than one PUCCH for HARQ-ACK transmission for multicast or for unicast and multicast within a slot
multiPUCCH-HARQ-ACK-ForMulticastUnicast-r17 ENUMERATED {supported} OPTIONAL,
-- R1 33-9: Supporting unicast PDCCH to release SPS group-common PDSCH
releaseSPS-MulticastWithCS-RNTI-r17 ENUMERATED {supported} OPTIONAL
]],
[[
-- R1 41-3-1a UE automomous TA adjustment when cell-reselection happens
posUE-TA-AutoAdjustment-r18 ENUMERATED {supported} OPTIONAL,
-- R1 41-3-1: SRS for positioning configuration in multiple cells for UEs in RRC_INACTIVE state for initial UL BWP
posSRS-ValidityAreaRRC-InactiveInitialUL-BWP-r18 ENUMERATED {supported} OPTIONAL,
-- R1 41-3-2: SRS for positioning configuration in multiple cells for UEs in RRC_INACTIVE state for configured outside
-- initial UL BWP
posSRS-ValidityAreaRRC-InactiveOutsideInitialUL-BWP-r18 ENUMERATED {supported} OPTIONAL,
-- R1 41-5-1:PRS measurement with Rx frequency hopping within a MG and measurement reporting RRC_CONNECTED for RedCap UEs
dl-PRS-MeasurementWithRxFH-RRC-ConnectedForRedCap-r18 DL-PRS-MeasurementWithRxFH-RRC-Connected-r18 OPTIONAL,
-- R1 41-5-2: Support of positioning SRS with Tx frequency hopping in RRC_CONNECTED for RedCap UEs
posSRS-TxFH-RRC-ConnectedForRedCap-r18 PosSRS-TxFrequencyHoppingRRC-Connected-r18 OPTIONAL,
-- R1 41-5-2a: Support of positioning SRS with Tx frequency hopping in RRC_INACTIVE for RedCap UEs
posSRS-TxFH-RRC-InactiveForRedCap-r18 PosSRS-TxFrequencyHoppingRRC-Inactive-r18 OPTIONAL,
-- R1 41-4-8: Support of Positioning SRS bandwidth aggregation in RRC_INACTIVE
posSRS-BWA-RRC-Inactive-r18 PosSRS-BWA-RRC-Inactive-r18 OPTIONAL,
-- R1 41-4-6a support a Rel-17 single DCI scheduling positioning SRS resource sets across the linked carriers
-- for SRS bandwidth aggregation in RRC_CONNECTED state
posJointTriggerBySingleDCI-RRC-Connected-r18 ENUMERATED {supported} OPTIONAL,
-- R1 41-5-1a PRS measurement with Rx frequency hopping in RRC_INACTIVE for RedCap UEs
dl-PRS-MeasurementWithRxFH-RRC-InactiveforRedCap-r18 ENUMERATED {supported} OPTIONAL,
-- R1 41-5-1b PRS measurement with Rx frequency hopping in RRC_IDLE for RedCap UEs
dl-PRS-MeasurementWithRxFH-RRC-IdleforRedCap-r18 ENUMERATED {supported} OPTIONAL,
-- R1 42-1: Spatial domain adaptation with CSI feedback based on CSI report sub-configuration(s) for periodic CSI reporting
spatialAdaptation-CSI-Feedback-r18 SEQUENCE {
csiFeedbackType-r18 ENUMERATED {sdType1, sdType2, both},
maxNumberLmax-r18 INTEGER (2..4),
maxNumberCSI-ResourcePerCC-r18 SEQUENCE {
sdType1-Resource-r18 INTEGER (1..32),
sdType2-Resource-r18 INTEGER (1..32)
},
maxNumberTotalCSI-ResourcePerCC-r18 SEQUENCE {
sdType1-Resource-r18 ENUMERATED {n8, n16, n24, n32, n64, n128},
sdType2-Resource-r18 ENUMERATED {n8, n16, n24, n32, n64, n128}
},
totalNumberCSI-Reporting-r18 INTEGER (2..4)
} OPTIONAL,
-- R1 42-1a: Spatial domain adaptation with CSI feedback based on CSI report sub-configuration(s) for periodic CSI
-- reporting on PUSCH
spatialAdaptation-CSI-FeedbackPUSCH-r18 SEQUENCE {
csiFeedbackType-r18 ENUMERATED {sdType1, sdType2, both},
maxNumberLmax-r18 INTEGER (2..8),
subReportCSI-r18 INTEGER (2..4),
maxNumberCSI-ResourcePerCC-r18 INTEGER (1..32),
maxNumberTotalCSI-ResourcePerCC-r18 ENUMERATED {n8, n16, n24, n32, n64, n128},
totalNumberCSI-Reporting-r18 INTEGER (2..12)
} OPTIONAL,
-- R1 42-1b: Spatial domain adaptation with CSI feedback based on CSI report sub-configuration(s) for aperiodic CSI reporting
spatialAdaptation-CSI-FeedbackAperiodic-r18 SEQUENCE {
csiFeedbackType-r18 ENUMERATED {sdType1, sdType2, both},
maxNumberLmax-r18 INTEGER (2..8),
subReportCSI-r18 INTEGER (2..4),
maxNumberCSI-ResourcePerCC-r18 SEQUENCE {
sdType1-Resource-r18 INTEGER (1..32),
sdType2-Resource-r18 INTEGER (1..32)
},
maxNumberTotalCSI-ResourcePerCC-r18 SEQUENCE {
sdType1-Resource-r18 ENUMERATED {n8, n16, n24, n32, n64, n128},
sdType2-Resource-r18 ENUMERATED {n8, n16, n24, n32, n64, n128}
},
totalNumberCSI-Reporting-r18 INTEGER (2..12)
} OPTIONAL,
-- R1 42-1c: Spatial domain adaptation with CSI feedback based on CSI report sub-configuration(s) for semi-persistent
-- CSI reporting on PUCCH
spatialAdaptation-CSI-FeedbackPUCCH-r18 SEQUENCE {
csiFeedbackType-r18 ENUMERATED {sdType1, sdType2, both},
maxNumberLmax-r18 INTEGER (2..4),
subReportCSI-r18 INTEGER (2..4),
maxNumberCSI-ResourcePerCC-r18 INTEGER (1..32),
maxNumberTotalCSI-ResourcePerCC-r18 ENUMERATED {n8, n16, n24, n32, n64, n128},
totalNumberCSI-Reporting-r18 INTEGER (2..4)
} OPTIONAL,
-- R1 42-2: Power domain adaptation with CSI feedback based on CSI report sub-configuration(s) for periodic CSI reporting
powerAdaptation-CSI-Feedback-r18 SEQUENCE {
maxNumberLmax-r18 INTEGER (2..4),
maxNumberCSI-ResourcePerCC-r18 INTEGER (1..32),
maxNumberTotalCSI-ResourcePerCC-r18 ENUMERATED {n8, n16, n24, n32, n64, n128},
totalNumberCSI-Reporting-r18 INTEGER (2..4)
} OPTIONAL,
-- R1 42-2a: Power domain adaptation with CSI feedback based on CSI report sub-configuration(s) for semi-persistent CSI
-- reporting on PUSCH
powerAdaptation-CSI-FeedbackPUSCH-r18 SEQUENCE {
maxNumberLmax-r18 INTEGER (2..8),
subReportCSI-r18 INTEGER (2..4),
maxNumberCSI-ResourcePerCC-r18 INTEGER (1..32),
maxNumberTotalCSI-ResourcePerCC-r18 ENUMERATED {n8, n16, n24, n32, n64, n128},
totalNumberCSI-Reporting-r18 INTEGER (2..12)
} OPTIONAL,
-- R1 42-2b: Power domain adaptation with CSI feedback based on CSI report sub-configuration(s) for aperiodic CSI reporting
powerAdaptation-CSI-FeedbackAperiodic-r18 SEQUENCE {
maxNumberLmax-r18 INTEGER (2..8),
subReportCSI-r18 INTEGER (2..4),
maxNumberCSI-ResourcePerCC-r18 INTEGER (1..32),
maxNumberTotalCSI-ResourcePerCC-r18 ENUMERATED {n8, n16, n24, n32, n64, n128},
totalNumberCSI-Reporting-r18 INTEGER (2..12)
} OPTIONAL,
-- R1 42-2c: Power domain adaptation with CSI feedback based on CSI report sub-configuration(s) for semi-persistent CSI
-- reporting on PUCCH
powerAdaptation-CSI-FeedbackPUCCH-r18 SEQUENCE {
maxNumberLmax-r18 INTEGER (2..4),
subReportCSI-r18 INTEGER (2..4),
maxNumberCSI-ResourcePerCC-r18 INTEGER (1..32),
maxNumberTotalCSI-ResourcePerCC-r18 ENUMERATED {n8, n16, n24, n32, n64, n128},
totalNumberCSI-Reporting-r18 INTEGER (2..4)
} OPTIONAL,
-- R1 42-4: Cell DTX and/or DRX operation based on RRC configuration
nes-CellDTX-DRX-r18 ENUMERATED {cellDTXonly, cellDRXonly, both} OPTIONAL,
-- R1 42-5: Cell DTX/DRX operation triggered by DCI format 2_9
nes-CellDTX-DRX-DCI2-9-r18 ENUMERATED {supported} OPTIONAL,
-- R1 42-7: Mixed codebook combination for spatial domain adaptation with CSI feedback based on CSI report sub-configuration(s),
-- each containing one port subset configuration
mixCodeBookSpatialAdaptation-r18 ENUMERATED {supported} OPTIONAL,
-- R1 42-8: the number of CSI report(s) for which the UE can measure and process reference signals simultaneously in a CC of the
-- band for which this capability is provided.
simultaneousCSI-SubReportsPerCC-r18 INTEGER (1..8) OPTIONAL,
-- R1 44-2: NTN DMRS bundling enhancement for PUSCH in NGSO scenarios
ntn-DMRS-BundlingNGSO-r18 ENUMERATED {n4, n8, n16, n32} OPTIONAL,
-- R1 45-3: Beam indication with joint DL/UL LTM TCI states
ltm-BeamIndicationJointTCI-r18 SEQUENCE {
maxNumberJointTCI-PerCell-r18 ENUMERATED {n8,n12,n16,n24,n32,n48,n64,n128},
qcl-Resource-r18 ENUMERATED {ssb, trs, both},
maxNumberJointTCI-AcrossCells-r18 INTEGER (1..128),
maxNumberCells-r18 INTEGER (1..8)
} OPTIONAL,
dummy-ltm-MAC-CE-JointTCI-r18 SEQUENCE {
qcl-Resource-r18 ENUMERATED {ssb, trs, both},
maxNumberJointTCI-PerCell-r18 INTEGER (1..16),
maxNumberJointTCI-AcrossCells-r18 ENUMERATED {n1,n2,n3,n4,n8,n16,n32}
} OPTIONAL,
-- R1 45-4: Beam indication with separate DL/UL LTM TCI states
ltm-BeamIndicationSeparateTCI-r18 SEQUENCE {
maxNumberDL-TCI-PerCell-r18 ENUMERATED {n4,n8,n12,n16,n24,n32,n48,n64,n128},
maxNumberUL-TCI-PerCell-r18 ENUMERATED {n4,n8,n12,n16,n24,n32,n48,n64},
qcl-Resource-r18 ENUMERATED {ssb, trs, both},
maxNumberDL-TCI-AcrossCells-r18 INTEGER (1..128),
maxNumberUL-TCI-AcrossCells-r18 INTEGER (1..64),
maxNumberCells-r18 INTEGER (1..8)
} OPTIONAL,
dummy-ltm-MAC-CE-SeparateTCI-r18 SEQUENCE {
qcl-Resource-r18 ENUMERATED {ssb, trs, both},
maxNumberDL-TCI-PerCell-r18 INTEGER (1..8),
maxNumberUL-TCI-PerCell-r18 INTEGER (1..8),
maxNumberDL-TCI-AcrossCells-r18 ENUMERATED {n1,n2,n4,n8,n16},
maxNumberUL-TCI-AcrossCells-r18 ENUMERATED {n1,n2,n4,n8,n16}
} OPTIONAL,
-- R1 45-5: RACH-based early TA acquisition
rach-EarlyTA-Measurement-r18 INTEGER (1..8) OPTIONAL,
-- R1 45-6: UE-based TA measurement
ue-TA-Measurement-r18 INTEGER (1..8) OPTIONAL,
-- R1 45-7: TA indication in cell switch command
ta-IndicationCellSwitch-r18 ENUMERATED {supported} OPTIONAL,
-- R1 49-8: Triggered HARQ-ACK codebook re-transmission for DCI format 1_3
triggeredHARQ-CodebookRetxDCI-1-3-r18 SEQUENCE {
minHARQ-Retx-Offset-r18 ENUMERATED {n-7, n-5, n-3, n-1, n1},
maxHARQ-Retx-Offset-r18 ENUMERATED {n4, n6, n8, n10, n12, n14, n16, n18, n20, n22, n24}
} OPTIONAL,
-- R1 49-12: Unified TCI with joint DL/UL TCI update by DCI format 1_3 for intra-cell and inter-cell beam management with more than
-- one MAC-CE activated joint TCI state per CC
unifiedJointTCI-MultiMAC-CE-DCI-1-3-r18 SEQUENCE {
minBeamApplicationTime-r18 CHOICE {
fr1-r18 SEQUENCE {
scs-15kHz-r18 ENUMERATED {sym1, sym2, sym4, sym7, sym14, sym28, sym42, sym56, sym70} OPTIONAL,
scs-30kHz-r18 ENUMERATED {sym1, sym2, sym4, sym7, sym14, sym28, sym42, sym56, sym70} OPTIONAL,
scs-60kHz-r18 ENUMERATED {sym1, sym2, sym4, sym7, sym14, sym28, sym42, sym56, sym70} OPTIONAL
},
fr2-r18 SEQUENCE {
scs-60kHz-r18 ENUMERATED {sym1, sym2, sym4, sym7, sym14, sym28, sym42, sym56, sym70,
sym84, sym98, sym112, sym224, sym336} OPTIONAL,
scs-120kHz-r18 ENUMERATED {sym1, sym2, sym4, sym7, sym14, sym28, sym42, sym56, sym70,
sym84, sym98, sym112, sym224, sym336} OPTIONAL
}
},
maxActivatedTCI-PerCC-r18 INTEGER (2..8) OPTIONAL
} OPTIONAL,
-- R1 49-12a: Unified TCI with separate DL/UL TCI update by DCI format 1_3 for intra-cell beam management with more than
-- one MAC-CE activated separate TCI state per CC
unifiedSeparateTCI-MultiMAC-CE-IntraCell-r18 SEQUENCE {
minBeamApplicationTime-r18 CHOICE {
fr1-r18 SEQUENCE {
scs-15kHz-r18 ENUMERATED {sym1, sym2, sym4, sym7, sym14, sym28, sym42, sym56, sym70,
sym84, sym98, sym112, sym224, sym336} OPTIONAL,
scs-30kHz-r18 ENUMERATED {sym1, sym2, sym4, sym7, sym14, sym28, sym42, sym56, sym70,
sym84, sym98, sym112, sym224, sym336} OPTIONAL,
scs-60kHz-r18 ENUMERATED {sym1, sym2, sym4, sym7, sym14, sym28, sym42, sym56, sym70,
sym84, sym98, sym112, sym224, sym336} OPTIONAL
},
fr2-r18 SEQUENCE {
scs-60kHz-r18 ENUMERATED {sym1, sym2, sym4, sym7, sym14, sym28, sym42, sym56, sym70,
sym84, sym98, sym112, sym224, sym336} OPTIONAL,
scs-120kHz-r18 ENUMERATED {sym1, sym2, sym4, sym7, sym14, sym28, sym42, sym56, sym70,
sym84, sym98, sym112, sym224, sym336} OPTIONAL
}
},
maxActivatedDL-TCI-PerCC-r18 INTEGER (2..8) OPTIONAL,
maxActivatedUL-TCI-PerCC-r18 INTEGER (2..8) OPTIONAL
} OPTIONAL,
-- R1 50-1: Multi-PUSCHs for Configured Grant
multiPUSCH-CG-r18 ENUMERATED {n16, n32} OPTIONAL,
-- R1 50-1a: Multiple active multi-PUSCHs configured grant configurations for a BWP of a serving cell
multiPUSCH-ActiveConfiguredGrant-r18 SEQUENCE {
maxNumberConfigsPerBWP ENUMERATED {n1, n2, n4, n8, n12},
maxNumberConfigsAllCC-FR1 INTEGER (2..32),
maxNumberConfigsAllCC-FR2 INTEGER (2..32)
} OPTIONAL,
-- R1 50-1b: Joint release in a DCI for two or more configured grant Type 2 configurations, including multi-PUSCH CG
-- configuration(s), for a given BWP of a serving cell
jointReleaseDCI-r18 ENUMERATED {supported} OPTIONAL,
-- R1 50-2: UCI indication of unused CG-PUSCH transmission occasions
cg-PUSCH-UTO-UCI-Ind-r18 ENUMERATED {supported} OPTIONAL,
-- R1 50-3: PDCCH monitoring resumption after UL NACK
pdcch-MonitoringResumptionAfterUL-NACK-r18 ENUMERATED {supported} OPTIONAL,
-- R1 51-1: Support for 3 MHz symmetric channel bandwidth in DL and UL
support3MHz-ChannelBW-Symmetric-r18 ENUMERATED {supported} OPTIONAL,
-- R1 51-1a: Support for 3 MHz channel bandwidth in uplink with larger than 3 MHz channel BW in DL
support3MHz-ChannelBW-Asymmetric-r18 ENUMERATED {supported} OPTIONAL,
-- R1 51-2a: support 12 PRB CORESET0
support12PRB-CORESET0-r18 ENUMERATED {supported} OPTIONAL,
-- R1 52-1: Reception of NR PDCCH candidates overlapping with LTE CRS REs
nr-PDCCH-OverlapLTE-CRS-RE-r18 SEQUENCE {
overlapInRE-r18 ENUMERATED {oneSymbolNoOverlap, someOrAllSymOverlap},
overlapInSymbol-r18 ENUMERATED {symbol2,symbol1And2}
} OPTIONAL,
-- Editor's Note: someOrAllSymOverlap considers to be supported in overlapInRE-r18 only if RAN4 performance requirements for
-- someOrAllSymOverlap are not defined
-- R1 52-1a: Reception of NR PDCCH candidates overlapping with LTE CRS REs with multiple non-overlapping CRS rate matching patterns
nr-PDCCH-OverlapLTE-CRS-RE-MultiPatterns-r18 ENUMERATED {supported} OPTIONAL,
-- R1 52-1b: NR PDCCH reception that overlaps with LTE CRS within a single span of 3 consecutive OFDM symbols that is within the
-- first 4 OFDM symbols in a slot
nr-PDCCH-OverlapLTE-CRS-RE-Span-3-4-r18 ENUMERATED {supported} OPTIONAL,
-- R1 52-2: Two LTE-CRS overlapping rate matching patterns within NR 15 kHz carrier overlapping with LTE carrier (regardless of
-- support or configuration of multi-TRP)
twoRateMatchingEUTRA-CRS-patterns-3-4-r18 SEQUENCE {
maxNumberPatterns-r18 INTEGER (2..6),
maxNumberNon-OverlapPatterns-r18 INTEGER (1..3)
} OPTIONAL,
-- R1 52-2a: Two LTE-CRS overlapping rate matching patterns with two different values of coresetPoolIndex within NR 15 kHz carrier
-- overlapping with LTE carrier
overlapRateMatchingEUTRA-CRS-Patterns-3-4-Diff-CS-Pool-r18 ENUMERATED {supported} OPTIONAL,
-- R1 53-3: Support RLM/BM/BFD measurements based on NCD-SSB within active BWP
ncd-SSB-BWP-Wor-r18 ENUMERATED {supported} OPTIONAL,
-- R1 53-4: Support Support RLM/BM/BFD measurements based on CSI-RS when CD-SSB is outside active BWP
rlm-BM-BFD-CSI-RS-OutsideActiveBWP-r18 ENUMERATED {supported} OPTIONAL,
-- R1 54-1: PRACH coverage enhancements
prach-CoverageEnh-r18 ENUMERATED {supported} OPTIONAL,
-- R1 54-1a: PRACH repetitions with less than N symbols gap
prach-Repetition-r18 ENUMERATED {supported} OPTIONAL,
-- R1 54-3: Dynamic waveform switching
dynamicWaveformSwitch-r18 ENUMERATED {supported} OPTIONAL,
-- R1 54-3a: PHR enhancement for dynamic waveform switching
dynamicWaveformSwitchPHR-r18 ENUMERATED {supported} OPTIONAL,
-- R1 54-3b: Dynamic waveform switching for intra-band UL CA
dynamicWaveformSwitchIntraCA-r18 INTEGER (2..8) OPTIONAL,
-- R1 55-3: Multiple PUSCHs scheduling by single DCI for non-consecutive slots in FR1
multiPUSCH-SingleDCI-NonConsSlots-r18 ENUMERATED {supported} OPTIONAL,
-- R1 55-2d: single-symbol DL-PRS used in RTT-based Propagation delay compensation
pdc-maxNumberPRS-ResourceProcessedPerSlot-r18 SEQUENCE {
fr1-r18 SEQUENCE {
scs-15kHz-r18 ENUMERATED {n1, n2, n4, n6, n8, n12, n16, n24, n32, n48, n64} OPTIONAL,
scs-30kHz-r18 ENUMERATED {n1, n2, n4, n6, n8, n12, n16, n24, n32, n48, n64} OPTIONAL,
scs-60kHz-r18 ENUMERATED {n1, n2, n4, n6, n8, n12, n16, n24, n32, n48, n64} OPTIONAL
},
fr2-r18 SEQUENCE {
scs-60kHz-r18 ENUMERATED {n1, n2, n4, n6, n8, n12, n16, n24, n32, n48, n64} OPTIONAL,
scs-120kHz-r18 ENUMERATED {n1, n2, n4, n6, n8, n12, n16, n24, n32, n48, n64} OPTIONAL
}
} OPTIONAL,
-- R1 57-2: Intra-slot TDM-ed unicast PDSCH and group-common PDSCH for multicast in RRC_INACTIVE state
intraSlot-PDSCH-MulticastInactive-r18 BOOLEAN OPTIONAL,
-- R1 57-1: Dynamic scheduling for multicast in RRC_INACTIVE state
multicastInactive-r18 ENUMERATED {supported} OPTIONAL,
thresholdBasedMulticastResume-r18 ENUMERATED {supported} OPTIONAL,
-- R4 27-2: LowerMSD for inter-band NR CA and EN-DC
lowerMSD-r18 SEQUENCE (SIZE (1..maxLowerMSD-r18)) OF LowerMSD-r18 OPTIONAL,
lowerMSD-ENDC-r18 SEQUENCE (SIZE (1..maxLowerMSD-r18)) OF LowerMSD-r18 OPTIONAL,
-- R4 28-1: Enhanced channel raster
enhancedChannelRaster-r18 ENUMERATED {supported} OPTIONAL,
-- R4 30-2: Fast beam sweeping for layer-1 measurement when the UE is in multi-Rx operation
fastBeamSweepingMultiRx-r18 ENUMERATED {n2,n4,n6} OPTIONAL,
-- R4 31-2 Beam sweeping factor reduction for FR2 unknown SCell activation
beamSweepingFactorReduction-r18 SEQUENCE {
reduceForCellDetection ENUMERATED {n1, n2, n4, n6},
reduceForSSB-L1-RSRP-Meas INTEGER (0..7)
} OPTIONAL,
-- R4 34-1: Support of NR FR2 HST with simultaneous DL reception with two different QCL TypeD RSs
simultaneousReceptionTwoQCL-r18 ENUMERATED {supported} OPTIONAL,
-- R4 34-2: Enhanced FR2 HST RRM requirements for intra-band CA and inter-frequency measurements in connected mode
measEnhCAInterFreqFR2-r18 ENUMERATED {supported} OPTIONAL,
-- R4 34-4: Support of enhanced MAC CE for TCI state switch indication for FR2 HST
tci-StateSwitchInd-r18 ENUMERATED {supported} OPTIONAL,
-- R4 35-2: the requirements defined for ATG UE with antenna array or omni-direction antenna requirements.
antennaArrayType-r18 ENUMERATED {supported} OPTIONAL,
locationBasedCondHandoverATG-r18 ENUMERATED {supported} OPTIONAL,
-- R4 35-3: rated maximum output power value range from 23dBm to 40dBm with 1dB as granularity at maximum modulation order and full
-- PRB configurations.
maxOutputPowerATG-r18 INTEGER (1..18) OPTIONAL,
-- R4 39-6: Fast processing of LTM candidate cell RRC configuration
ltm-FastProcessingConfig-r18 SEQUENCE {
maxNumberStoredConfigCells-r18 ENUMERATED {n2,n3,n4,n5,n6,n7,n8,n9,n10,n11,n12,n16},
maxNumberConfigs-r18 INTEGER (1..4)
} OPTIONAL,
-- R4 39-8: Measurement validation based on EMR measurement during connection setup/resume
measValidationReportEMR-r18 ENUMERATED {supported} OPTIONAL,
-- R4 39-9: Measurement validation based on reselection measurement during connection setup/resume
measValidationReportReselectionMeasurements-r18 ENUMERATED {supported} OPTIONAL,
eventA4BasedCondHandoverNES-r18 ENUMERATED {supported} OPTIONAL,
nesBasedCondHandoverWithDCI-r18 ENUMERATED {supported} OPTIONAL,
rach-LessHandoverCG-r18 ENUMERATED {supported} OPTIONAL,
rach-LessHandoverDG-r18 ENUMERATED {supported} OPTIONAL,
locationBasedCondHandoverEMC-r18 ENUMERATED {supported} OPTIONAL,
mt-CG-SDT-r18 ENUMERATED {supported} OPTIONAL,
posSRS-PreconfigureRRC-InactiveInitialUL-BWP-r18 ENUMERATED {supported} OPTIONAL,
posSRS-PreconfigureRRC-InactiveOutsideInitialUL-BWP-r18 ENUMERATED {supported} OPTIONAL,
cg-SDT-PeriodicityExt-r18 ENUMERATED {supported} OPTIONAL,
-- R2: 2Rx XR UEs
supportOf2RxXR-r18 ENUMERATED {supported} OPTIONAL,
condHandoverWithCandSCG-change-r18 ENUMERATED {supported} OPTIONAL
]],
[[
mac-ParametersPerBand-r18 MAC-ParametersPerBand-r18 OPTIONAL,
channelBW-DL-NCR-r18 CHOICE {
fr1-100mhz SEQUENCE {
scs-15kHz ENUMERATED {supported} OPTIONAL,
scs-30kHz ENUMERATED {supported} OPTIONAL,
scs-60kHz ENUMERATED {supported} OPTIONAL
},
fr2-200mhz SEQUENCE {
scs-60kHz ENUMERATED {supported} OPTIONAL,
scs-120kHz ENUMERATED {supported} OPTIONAL
}
} OPTIONAL,
channelBW-UL-NCR-r18 CHOICE {
fr1-100mhz SEQUENCE {
scs-15kHz ENUMERATED {supported} OPTIONAL,
scs-30kHz ENUMERATED {supported} OPTIONAL,
scs-60kHz ENUMERATED {supported} OPTIONAL
},
fr2-200mhz SEQUENCE {
scs-60kHz ENUMERATED {supported} OPTIONAL,
scs-120kHz ENUMERATED {supported} OPTIONAL
}
} OPTIONAL,
ncr-PDSCH-64QAM-FR2-r18 ENUMERATED {supported} OPTIONAL,
ltm-MCG-IntraFreq-r18 ENUMERATED {supported} OPTIONAL,
ltm-SCG-IntraFreq-r18 ENUMERATED {supported} OPTIONAL
]],
[[
-- R1 45-3a: MAC-CE activated joint LTM TCI states
ltm-MAC-CE-JointTCI-r18 SEQUENCE {
qcl-Resource-r18 ENUMERATED {ssb, trs, both},
maxNumberJointTCI-PerCell-r18 INTEGER (1..16),
maxNumberJointTCI-AcrossCells-r18 INTEGER (1..32)
} OPTIONAL,
-- R1 45-4a: MAC-CE activated DL/UL LTM TCI states
ltm-MAC-CE-SeparateTCI-r18 SEQUENCE {
qcl-Resource-r18 ENUMERATED {ssb, trs, both},
maxNumberDL-TCI-PerCell-r18 INTEGER (1..8),
maxNumberUL-TCI-PerCell-r18 INTEGER (1..8),
maxNumberDL-TCI-AcrossCells-r18 INTEGER (1..32),
maxNumberUL-TCI-AcrossCells-r18 INTEGER (1..32)
} OPTIONAL
]]
}
BandNR-v16c0 ::= SEQUENCE {
pusch-RepetitionTypeA-v16c0 ENUMERATED {supported} OPTIONAL,
...
}
BandNR-v17b0 ::= SEQUENCE {
mimo-ParametersPerBand-v17b0 MIMO-ParametersPerBand-v17b0 OPTIONAL,
...
}
LowerMSD-r18 ::= SEQUENCE {
aggressorband1-r18 CHOICE {
nr FreqBandIndicatorNR,
eutra FreqBandIndicatorEUTRA
},
aggressorband2-r18 FreqBandIndicatorNR OPTIONAL,
msd-Information-r18 SEQUENCE (SIZE (1..maxLowerMSDInfo-r18)) OF MSD-Information-r18
}
MSD-Information-r18 ::= SEQUENCE {
msd-Type-r18 ENUMERATED {harmonic, harmonicMixing, crossBandIsolation, imd2, imd3, imd4, imd5, all, spare8, spare7,
spare6, spare5,spare4, spare3, spare2, spare1},
msd-PowerClass-r18 ENUMERATED {pc1dot5, pc2, pc3},
msd-Class-r18 ENUMERATED {classI, classII, classIII, classIV, classV, classVI, classVII, classVIII }
}
-- TAG-RF-PARAMETERS-STOP
-- ASN1STOP
– RF-ParametersMRDC
The IE RF-ParametersMRDC is used to convey RF related capabilities for MR-DC.
RF-ParametersMRDC information element
-- ASN1START
-- TAG-RF-PARAMETERSMRDC-START
RF-ParametersMRDC ::= SEQUENCE {
supportedBandCombinationList BandCombinationList OPTIONAL,
appliedFreqBandListFilter FreqBandList OPTIONAL,
...,
[[
srs-SwitchingTimeRequested ENUMERATED {true} OPTIONAL,
supportedBandCombinationList-v1540 BandCombinationList-v1540 OPTIONAL
]],
[[
supportedBandCombinationList-v1550 BandCombinationList-v1550 OPTIONAL
]],
[[
supportedBandCombinationList-v1560 BandCombinationList-v1560 OPTIONAL,
supportedBandCombinationListNEDC-Only BandCombinationList OPTIONAL
]],
[[
supportedBandCombinationList-v1570 BandCombinationList-v1570 OPTIONAL
]],
[[
supportedBandCombinationList-v1580 BandCombinationList-v1580 OPTIONAL
]],
[[
supportedBandCombinationList-v1590 BandCombinationList-v1590 OPTIONAL
]],
[[
supportedBandCombinationListNEDC-Only-v15a0 SEQUENCE {
supportedBandCombinationList-v1540 BandCombinationList-v1540 OPTIONAL,
supportedBandCombinationList-v1560 BandCombinationList-v1560 OPTIONAL,
supportedBandCombinationList-v1570 BandCombinationList-v1570 OPTIONAL,
supportedBandCombinationList-v1580 BandCombinationList-v1580 OPTIONAL,
supportedBandCombinationList-v1590 BandCombinationList-v1590 OPTIONAL
} OPTIONAL
]],
[[
supportedBandCombinationList-v1610 BandCombinationList-v1610 OPTIONAL,
supportedBandCombinationListNEDC-Only-v1610 BandCombinationList-v1610 OPTIONAL,
supportedBandCombinationList-UplinkTxSwitch-r16 BandCombinationList-UplinkTxSwitch-r16 OPTIONAL
]],
[[
supportedBandCombinationList-v1630 BandCombinationList-v1630 OPTIONAL,
supportedBandCombinationListNEDC-Only-v1630 BandCombinationList-v1630 OPTIONAL,
supportedBandCombinationList-UplinkTxSwitch-v1630 BandCombinationList-UplinkTxSwitch-v1630 OPTIONAL
]],
[[
supportedBandCombinationList-v1640 BandCombinationList-v1640 OPTIONAL,
supportedBandCombinationListNEDC-Only-v1640 BandCombinationList-v1640 OPTIONAL,
supportedBandCombinationList-UplinkTxSwitch-v1640 BandCombinationList-UplinkTxSwitch-v1640 OPTIONAL
]],
[[
supportedBandCombinationList-UplinkTxSwitch-v1670 BandCombinationList-UplinkTxSwitch-v1670 OPTIONAL
]],
[[
supportedBandCombinationList-v1700 BandCombinationList-v1700 OPTIONAL,
supportedBandCombinationList-UplinkTxSwitch-v1700 BandCombinationList-UplinkTxSwitch-v1700 OPTIONAL
]],
[[
supportedBandCombinationList-v1720 BandCombinationList-v1720 OPTIONAL,
supportedBandCombinationListNEDC-Only-v1720 SEQUENCE {
supportedBandCombinationList-v1700 BandCombinationList-v1700 OPTIONAL,
supportedBandCombinationList-v1720 BandCombinationList-v1720 OPTIONAL
} OPTIONAL,
supportedBandCombinationList-UplinkTxSwitch-v1720 BandCombinationList-UplinkTxSwitch-v1720 OPTIONAL
]],
[[
supportedBandCombinationList-v1730 BandCombinationList-v1730 OPTIONAL,
supportedBandCombinationListNEDC-Only-v1730 BandCombinationList-v1730 OPTIONAL,
supportedBandCombinationList-UplinkTxSwitch-v1730 BandCombinationList-UplinkTxSwitch-v1730 OPTIONAL
]],
[[
supportedBandCombinationList-v1740 BandCombinationList-v1740 OPTIONAL,
supportedBandCombinationListNEDC-Only-v1740 BandCombinationList-v1740 OPTIONAL,
supportedBandCombinationList-UplinkTxSwitch-v1740 BandCombinationList-UplinkTxSwitch-v1740 OPTIONAL
]],
[[
dummy1 BandCombinationList-v1770 OPTIONAL,
dummy2 BandCombinationList-UplinkTxSwitch-v1770 OPTIONAL
]],
[[
supportedBandCombinationList-v1780 BandCombinationList-v1780 OPTIONAL,
supportedBandCombinationListNEDC-Only-v1780 BandCombinationList-v1780 OPTIONAL,
supportedBandCombinationList-UplinkTxSwitch-v1780 BandCombinationList-UplinkTxSwitch-v1780 OPTIONAL
]],
[[
supportedBandCombinationList-v1790 BandCombinationList-v1790 OPTIONAL,
supportedBandCombinationList-UplinkTxSwitch-v1790 BandCombinationList-UplinkTxSwitch-v1790 OPTIONAL
]],
[[
supportedBandCombinationList-v1800 BandCombinationList-v1800 OPTIONAL,
supportedBandCombinationList-UplinkTxSwitch-v1800 BandCombinationList-UplinkTxSwitch-v1800 OPTIONAL
]],
[[
supportedBandCombinationList-v1830 BandCombinationList-v1830 OPTIONAL,
supportedBandCombinationList-UplinkTxSwitch-v1830 BandCombinationList-UplinkTxSwitch-v1830 OPTIONAL
]],
[[
supportedBandCombinationList-v1840 BandCombinationList-v1840 OPTIONAL,
supportedBandCombinationList-UplinkTxSwitch-v1840 BandCombinationList-UplinkTxSwitch-v1840 OPTIONAL
]]
}
RF-ParametersMRDC-v15g0 ::= SEQUENCE {
supportedBandCombinationList-v15g0 BandCombinationList-v15g0 OPTIONAL,
supportedBandCombinationListNEDC-Only-v15g0 BandCombinationList-v15g0 OPTIONAL
}
RF-ParametersMRDC-v15n0 ::= SEQUENCE {
supportedBandCombinationList-v15n0 BandCombinationList-v15n0 OPTIONAL
}
RF-ParametersMRDC-v16e0 ::= SEQUENCE {
supportedBandCombinationList-UplinkTxSwitch-v16e0 BandCombinationList-UplinkTxSwitch-v16e0 OPTIONAL
}
-- TAG-RF-PARAMETERSMRDC-STOP
-- ASN1STOP
– RLC-Parameters
The IE RLC-Parameters is used to convey capabilities related to RLC.
RLC-Parameters information element
-- ASN1START
-- TAG-RLC-PARAMETERS-START
RLC-Parameters ::= SEQUENCE {
am-WithShortSN ENUMERATED {supported} OPTIONAL,
um-WithShortSN ENUMERATED {supported} OPTIONAL,
um-WithLongSN ENUMERATED {supported} OPTIONAL,
...,
[[
extendedT-PollRetransmit-r16 ENUMERATED {supported} OPTIONAL,
extendedT-StatusProhibit-r16 ENUMERATED {supported} OPTIONAL
]],
[[
am-WithLongSN-RedCap-r17 ENUMERATED {supported} OPTIONAL
]],
[[
am-WithLongSN-NCR-r18 ENUMERATED {supported} OPTIONAL
]]
}
-- TAG-RLC-PARAMETERS-STOP
-- ASN1STOP
– SDAP-Parameters
The IE SDAP-Parameters is used to convey capabilities related to SDAP.
SDAP-Parameters information element
-- ASN1START
-- TAG-SDAP-PARAMETERS-START
SDAP-Parameters ::= SEQUENCE {
as-ReflectiveQoS ENUMERATED {true} OPTIONAL,
...,
[[
sdap-QOS-IAB-r16 ENUMERATED {supported} OPTIONAL,
sdapHeaderIAB-r16 ENUMERATED {supported} OPTIONAL
]],
[[
sdap-QOS-NCR-r18 ENUMERATED {supported} OPTIONAL,
sdap-HeaderNCR-r18 ENUMERATED {supported} OPTIONAL
]]
}
-- TAG-SDAP-PARAMETERS-STOP
-- ASN1STOP
– SharedSpectrumChAccessParamsPerBand
The IE SharedSpectrumChAccessParamsPerBand is used to convey shared channel access related parameters specific for a certain frequency band (not per feature set or band combination).
SharedSpectrumChAccessParamsPerBand information element
-- ASN1START
-- TAG-SHAREDSPECTRUMCHACCESSPARAMSPERBAND-START
SharedSpectrumChAccessParamsPerBand-r16 ::= SEQUENCE {
-- R1 10-1: UL channel access for dynamic channel access mode
ul-DynamicChAccess-r16 ENUMERATED {supported} OPTIONAL,
-- R1 10-1a: UL channel access for semi-static channel access mode
ul-Semi-StaticChAccess-r16 ENUMERATED {supported} OPTIONAL,
-- R1 10-2: SSB-based RRM for dynamic channel access mode
ssb-RRM-DynamicChAccess-r16 ENUMERATED {supported} OPTIONAL,
-- R1 10-2a: SSB-based RRM for semi-static channel access mode
ssb-RRM-Semi-StaticChAccess-r16 ENUMERATED {supported} OPTIONAL,
-- R1 10-2b: MIB reading on unlicensed cell
mib-Acquisition-r16 ENUMERATED {supported} OPTIONAL,
-- R1 10-2c: SSB-based RLM for dynamic channel access mode
ssb-RLM-DynamicChAccess-r16 ENUMERATED {supported} OPTIONAL,
-- R1 10-2d: SSB-based RLM for semi-static channel access mode
ssb-RLM-Semi-StaticChAccess-r16 ENUMERATED {supported} OPTIONAL,
-- R1 10-2e: SIB1 reception on unlicensed cell
sib1-Acquisition-r16 ENUMERATED {supported} OPTIONAL,
-- R1 10-2f: Support monitoring of extended RAR window
extRA-ResponseWindow-r16 ENUMERATED {supported} OPTIONAL,
-- R1 10-2g: SSB-based BFD/CBD for dynamic channel access mode
ssb-BFD-CBD-dynamicChannelAccess-r16 ENUMERATED {supported} OPTIONAL,
-- R1 10-2h: SSB-based BFD/CBD for semi-static channel access mode
ssb-BFD-CBD-semi-staticChannelAccess-r16 ENUMERATED {supported} OPTIONAL,
-- R1 10-2i: CSI-RS-based BFD/CBD for NR-U
csi-RS-BFD-CBD-r16 ENUMERATED {supported} OPTIONAL,
-- R1 10-7: UL channel access for 10 MHz SCell
ul-ChannelBW-SCell-10mhz-r16 ENUMERATED {supported} OPTIONAL,
-- R1 10-10: RSSI and channel occupancy measurement and reporting
rssi-ChannelOccupancyReporting-r16 ENUMERATED {supported} OPTIONAL,
-- R1 10-11:SRS starting position at any OFDM symbol in a slot
srs-StartAnyOFDM-Symbol-r16 ENUMERATED {supported} OPTIONAL,
-- R1 10-20: Support search space set configuration with freqMonitorLocation-r16
searchSpaceFreqMonitorLocation-r16 INTEGER (1..5) OPTIONAL,
-- R1 10-20a: Support coreset configuration with rb-Offset
coreset-RB-Offset-r16 ENUMERATED {supported} OPTIONAL,
-- R1 10-23:CGI reading on unlicensed cell for ANR functionality
cgi-Acquisition-r16 ENUMERATED {supported} OPTIONAL,
-- R1 10-25: Enable configured UL transmissions when DCI 2_0 is configured but not detected
configuredUL-Tx-r16 ENUMERATED {supported} OPTIONAL,
-- R1 10-27: Wideband PRACH
prach-Wideband-r16 ENUMERATED {supported} OPTIONAL,
-- R1 10-29: Support available RB set indicator field in DCI 2_0
dci-AvailableRB-Set-r16 ENUMERATED {supported} OPTIONAL,
-- R1 10-30: Support channel occupancy duration indicator field in DCI 2_0
dci-ChOccupancyDuration-r16 ENUMERATED {supported} OPTIONAL,
-- R1 10-8: Type B PDSCH length {3, 5, 6, 8, 9, 10, 11, 12, 13} without DMRS shift due to CRS collision
typeB-PDSCH-length-r16 ENUMERATED {supported} OPTIONAL,
-- R1 10-9: Search space set group switching with explicit DCI 2_0 bit field trigger or with implicit PDCCH decoding with DCI 2_0 monitoring
searchSpaceSwitchWithDCI-r16 ENUMERATED {supported} OPTIONAL,
-- R1 10-9b: Search space set group switching with implicit PDCCH decoding without DCI 2_0 monitoring
searchSpaceSwitchWithoutDCI-r16 ENUMERATED {supported} OPTIONAL,
-- R1 10-9d: Support Search space set group switching capability 2
searchSpaceSwitchCapability2-r16 ENUMERATED {supported} OPTIONAL,
-- R1 10-14: Non-numerical PDSCH to HARQ-ACK timing
non-numericalPDSCH-HARQ-timing-r16 ENUMERATED {supported} OPTIONAL,
-- R1 10-15: Enhanced dynamic HARQ codebook
enhancedDynamicHARQ-codebook-r16 ENUMERATED {supported} OPTIONAL,
-- R1 10-16: One-shot HARQ ACK feedback
oneShotHARQ-feedback-r16 ENUMERATED {supported} OPTIONAL,
-- R1 10-17: Multi-PUSCH UL grant
multiPUSCH-UL-grant-r16 ENUMERATED {supported} OPTIONAL,
-- R1 10-26: CSI-RS based RLM for NR-U
csi-RS-RLM-r16 ENUMERATED {supported} OPTIONAL,
dummy ENUMERATED {supported} OPTIONAL,
-- R1 10-31: Support of P/SP-CSI-RS reception with CSI-RS-ValidationWith-DCI-r16 configured
periodicAndSemi-PersistentCSI-RS-r16 ENUMERATED {supported} OPTIONAL,
-- R1 10-3: PRB interlace mapping for PUSCH
pusch-PRB-interlace-r16 ENUMERATED {supported} OPTIONAL,
-- R1 10-3a: PRB interlace mapping for PUCCH
pucch-F0-F1-PRB-Interlace-r16 ENUMERATED {supported} OPTIONAL,
-- R1 10-12: OCC for PRB interlace mapping for PF2 and PF3
occ-PRB-PF2-PF3-r16 ENUMERATED {supported} OPTIONAL,
-- R1 10-13a: Extended CP range of more than one symbol for CG-PUSCH
extCP-rangeCG-PUSCH-r16 ENUMERATED {supported} OPTIONAL,
-- R1 10-18: Configured grant with retransmission in CG resources
configuredGrantWithReTx-r16 ENUMERATED {supported} OPTIONAL,
-- R1 10-21a: Support using ED threshold given by gNB for UL to DL COT sharing
ed-Threshold-r16 ENUMERATED {supported} OPTIONAL,
-- R1 10-21b: Support UL to DL COT sharing
ul-DL-COT-Sharing-r16 ENUMERATED {supported} OPTIONAL,
-- R1 10-24: CG-UCI multiplexing with HARQ ACK
mux-CG-UCI-HARQ-ACK-r16 ENUMERATED {supported} OPTIONAL,
-- R1 10-28: Configured grant with Rel-16 enhanced resource configuration
cg-resourceConfig-r16 ENUMERATED {supported} OPTIONAL
}
SharedSpectrumChAccessParamsPerBand-v1630 ::= SEQUENCE {
-- R4 4-1: DL reception in intra-carrier guardband
dl-ReceptionIntraCellGuardband-r16 ENUMERATED {supported} OPTIONAL,
-- R4 4-2: DL reception when gNB does not transmit on all RB sets of a carrier as a result of LBT
dl-ReceptionLBT-subsetRB-r16 ENUMERATED {supported} OPTIONAL
}
SharedSpectrumChAccessParamsPerBand-v1640 ::= SEQUENCE {
-- 10-26b(1-4): CSI-RS based RRM measurement with associated SS-block
csi-RSRP-AndRSRQ-MeasWithSSB-r16 ENUMERATED {supported} OPTIONAL,
-- 10-26c(1-5): CSI-RS based RRM measurement without associated SS-block
csi-RSRP-AndRSRQ-MeasWithoutSSB-r16 ENUMERATED {supported} OPTIONAL,
-- 10-26d(1-6): CSI-RS based RS-SINR measurement
csi-SINR-Meas-r16 ENUMERATED {supported} OPTIONAL,
-- 10-26e(1-8): RLM based on a mix of SS block and CSI-RS signals within active BWP
ssb-AndCSI-RS-RLM-r16 ENUMERATED {supported} OPTIONAL,
-- 10-26f(1-9): CSI-RS based contention free RA for HO
csi-RS-CFRA-ForHO-r16 ENUMERATED {supported} OPTIONAL
}
SharedSpectrumChAccessParamsPerBand-v1650 ::= SEQUENCE {
-- Extension of R1 10-9 capability to configure up to 16 instead of 4 cells or cell groups, respectively
extendedSearchSpaceSwitchWithDCI-r16 ENUMERATED {supported} OPTIONAL
}
SharedSpectrumChAccessParamsPerBand-v1710 ::= SEQUENCE {
-- R1 25-12: UE initiated semi-static channel occupancy with dependent configurations
ul-Semi-StaticChAccessDependentConfig-r17 ENUMERATED {supported} OPTIONAL,
-- R1 25-13: UE initiated semi-static channel occupancy with independent configurations
ul-Semi-StaticChAccessIndependentConfig-r17 ENUMERATED {supported} OPTIONAL
}
-- TAG-SHAREDSPECTRUMCHACCESSPARAMSPERBAND-STOP
-- ASN1STOP
– SharedSpectrumChAccessParamsSidelinkPerBand
The IE SharedSpectrumChAccessParamsSidelinkPerBand is used to convey shared channel access related parameters related to NR sidelink communication, specific for a certain frequency band (not per feature set or band combination).
SharedSpectrumChAccessParamsSidelinkPerBand information element
-- ASN1START
-- TAG-SHAREDSPECTRUMCHACCESSPARAMSSIDELINKPERBAND-START
SharedSpectrumChAccessParamsSidelinkPerBand-r18 ::= SEQUENCE {
-- R1 47-k1: SL channel access for dynamic channel access mode
sl-DynamicChannelAccess-r18 ENUMERATED {supported} OPTIONAL,
-- R1 47-k2: SL multi-channel access for dynamic channel access mode
sl-DynamicMultiChannelAccess-r18 INTEGER (2..5) OPTIONAL,
-- R1 47-k6: Type1 LBT blocking Option 1
sl-LBT-Option1-r18 ENUMERATED {supported} OPTIONAL,
-- R1 47-k7: Type1 LBT blocking Option 2
sl-LBT-Option2-r18 ENUMERATED {supported} OPTIONAL,
-- R1 47-k9: Sidelink mode 1 resource allocation in shared spectrum
sl-ResourceAllocMode1-r18 ENUMERATED {supported} OPTIONAL,
-- R1 47-m1: Interlace RB-based SL transmission/reception
sl-Interlace-RB-TxRx-r18 ENUMERATED {supported} OPTIONAL,
-- R1 47-m5: Multiple PSFCH occasions per PSCCH/PSSCH
sl-PSFCH-MultiOccasion-r18 INTEGER (1..4) OPTIONAL,
-- R1 47-m10: Contiguous RB-based PSCCH/PSSCH transmission/reception
sl-ContiguousRB-TxRx-r18 ENUMERATED {supported} OPTIONAL,
-- R1 47-m11: PSFCH transmissions in multiple contiguous RB sets
sl-PSFCH-MultiContiguousRB-r18 ENUMERATED {supported} OPTIONAL,
-- R1 47-m11a: PSFCH transmissions in multiple non-contiguous RB sets
sl-PSFCH-MultiNonContiguousRB-r18 ENUMERATED {supported} OPTIONAL,
-- R1 47-m13: Transmissions/receptions of multiple dedicated PRBs in common interlace-based PSFCH
sl-MultiplePRB-CommonInterlacePSFCH-r18 SEQUENCE {
tx-TotalPRB-PSFCH-r18 ENUMERATED {n4, n5, n8, n15, n16, n20},
rx-TotalPRB-PSFCH-r18 ENUMERATED {n5, n6, n15, n16, n25, n26, n32, n35, n45, n46, n50, n64, n65}
} OPTIONAL,
-- R1 47-m13a: Transmissions/receptions of multiple interlaces in dedicated interlace-based PSFCH
sl-MultiplePRB-DedicatedInterlacePSFCH-r18 SEQUENCE {
tx-TotalPRB-PSFCH-r18 INTEGER (1..3),
rx-TotalPRB-PSFCH-r18 INTEGER (1..5)
} OPTIONAL
}
-- TAG-SHAREDSPECTRUMCHACCESSPARAMSSIDELINKPERBAND-STOP
-- ASN1STOP
– SidelinkParameters
The IE SidelinkParameters is used to convey capabilities related to NR and V2X sidelink communications/positioning.
SidelinkParameters information element
-- ASN1START
-- TAG-SIDELINKPARAMETERS-START
SidelinkParameters-r16 ::= SEQUENCE {
sidelinkParametersNR-r16 SidelinkParametersNR-r16 OPTIONAL,
sidelinkParametersEUTRA-r16 SidelinkParametersEUTRA-r16 OPTIONAL
}
SidelinkParametersNR-r16 ::= SEQUENCE {
rlc-ParametersSidelink-r16 RLC-ParametersSidelink-r16 OPTIONAL,
mac-ParametersSidelink-r16 MAC-ParametersSidelink-r16 OPTIONAL,
fdd-Add-UE-Sidelink-Capabilities-r16 UE-SidelinkCapabilityAddXDD-Mode-r16 OPTIONAL,
tdd-Add-UE-Sidelink-Capabilities-r16 UE-SidelinkCapabilityAddXDD-Mode-r16 OPTIONAL,
supportedBandListSidelink-r16 SEQUENCE (SIZE (1..maxBands)) OF BandSidelink-r16 OPTIONAL,
...,
[[
relayParameters-r17 RelayParameters-r17 OPTIONAL
]],
[[
-- R1 32-x: Use of new P0 parameters for open loop power control
p0-OLPC-Sidelink-r17 ENUMERATED {supported} OPTIONAL
]],
[[
pdcp-ParametersSidelink-r18 PDCP-ParametersSidelink-r18 OPTIONAL,
--R1 41-1-1a: Common SL-PRS processing capability
sl-PRS-CommonProcCapabilityPerUE-r18 SEQUENCE {
maxNumOfActiveSL-PRS-Resources-r18 SEQUENCE {
fr1-r18 ENUMERATED {n1, n2, n4, n6, n8, n12, n16, n24} OPTIONAL,
fr2-r18 ENUMERATED {n1, n2, n4, n6, n8, n12, n16, n24, n32, n48, n64, n128} OPTIONAL
},
maxNumOfSlotswithActiveSL-PRS-Resources-r18 SEQUENCE {
fr1-r18 ENUMERATED {n1, n2, n3, n4, n6, n8} OPTIONAL,
fr2-r18 ENUMERATED {n1, n2, n4, n8, n12, n16, n24, n32, n48, n64} OPTIONAL
}
} OPTIONAL
]]
}
SidelinkParametersEUTRA-r16 ::= SEQUENCE {
sl-ParametersEUTRA1-r16 OCTET STRING OPTIONAL,
sl-ParametersEUTRA2-r16 OCTET STRING OPTIONAL,
sl-ParametersEUTRA3-r16 OCTET STRING OPTIONAL,
supportedBandListSidelinkEUTRA-r16 SEQUENCE (SIZE (1..maxBandsEUTRA)) OF BandSidelinkEUTRA-r16 OPTIONAL,
...
}
RLC-ParametersSidelink-r16 ::= SEQUENCE {
am-WithLongSN-Sidelink-r16 ENUMERATED {supported} OPTIONAL,
um-WithLongSN-Sidelink-r16 ENUMERATED {supported} OPTIONAL,
...
}
MAC-ParametersSidelink-r16 ::= SEQUENCE {
mac-ParametersSidelinkCommon-r16 MAC-ParametersSidelinkCommon-r16 OPTIONAL,
mac-ParametersSidelinkXDD-Diff-r16 MAC-ParametersSidelinkXDD-Diff-r16 OPTIONAL,
...
}
UE-SidelinkCapabilityAddXDD-Mode-r16 ::= SEQUENCE {
mac-ParametersSidelinkXDD-Diff-r16 MAC-ParametersSidelinkXDD-Diff-r16 OPTIONAL
}
MAC-ParametersSidelinkCommon-r16 ::= SEQUENCE {
lcp-RestrictionSidelink-r16 ENUMERATED {supported} OPTIONAL,
multipleConfiguredGrantsSidelink-r16 ENUMERATED {supported} OPTIONAL,
...,
[[
drx-OnSidelink-r17 ENUMERATED {supported} OPTIONAL
]],
[[
sl-LBT-FailureDectectionRecovery-r18 ENUMERATED {supported} OPTIONAL
]]
}
MAC-ParametersSidelinkXDD-Diff-r16 ::= SEQUENCE {
multipleSR-ConfigurationsSidelink-r16 ENUMERATED {supported} OPTIONAL,
logicalChannelSR-DelayTimerSidelink-r16 ENUMERATED {supported} OPTIONAL,
...
}
BandSidelinkEUTRA-r16 ::= SEQUENCE {
freqBandSidelinkEUTRA-r16 FreqBandIndicatorEUTRA,
-- R1 15-7: Transmitting LTE sidelink mode 3 scheduled by NR Uu
gnb-ScheduledMode3SidelinkEUTRA-r16 SEQUENCE {
gnb-ScheduledMode3DelaySidelinkEUTRA-r16 ENUMERATED {ms0, ms0dot25, ms0dot5, ms0dot625, ms0dot75, ms1,
ms1dot25, ms1dot5, ms1dot75, ms2, ms2dot5, ms3, ms4,
ms5, ms6, ms8, ms10, ms20}
} OPTIONAL,
-- R1 15-9: Transmitting LTE sidelink mode 4 configured by NR Uu
gnb-ScheduledMode4SidelinkEUTRA-r16 ENUMERATED {supported} OPTIONAL
}
BandSidelink-r16 ::= SEQUENCE {
freqBandSidelink-r16 FreqBandIndicatorNR,
--15-1
sl-Reception-r16 SEQUENCE {
harq-RxProcessSidelink-r16 ENUMERATED {n16, n24, n32, n48, n64},
pscch-RxSidelink-r16 ENUMERATED {value1, value2},
scs-CP-PatternRxSidelink-r16 CHOICE {
fr1-r16 SEQUENCE {
scs-15kHz-r16 BIT STRING (SIZE (16)) OPTIONAL,
scs-30kHz-r16 BIT STRING (SIZE (16)) OPTIONAL,
scs-60kHz-r16 BIT STRING (SIZE (16)) OPTIONAL
},
fr2-r16 SEQUENCE {
scs-60kHz-r16 BIT STRING (SIZE (16)) OPTIONAL,
scs-120kHz-r16 BIT STRING (SIZE (16)) OPTIONAL
}
} OPTIONAL,
extendedCP-RxSidelink-r16 ENUMERATED {supported} OPTIONAL
} OPTIONAL,
--15-2
sl-TransmissionMode1-r16 SEQUENCE {
harq-TxProcessModeOneSidelink-r16 ENUMERATED {n8, n16},
scs-CP-PatternTxSidelinkModeOne-r16 CHOICE {
fr1-r16 SEQUENCE {
scs-15kHz-r16 BIT STRING (SIZE (16)) OPTIONAL,
scs-30kHz-r16 BIT STRING (SIZE (16)) OPTIONAL,
scs-60kHz-r16 BIT STRING (SIZE (16)) OPTIONAL
},
fr2-r16 SEQUENCE {
scs-60kHz-r16 BIT STRING (SIZE (16)) OPTIONAL,
scs-120kHz-r16 BIT STRING (SIZE (16)) OPTIONAL
}
},
extendedCP-TxSidelink-r16 ENUMERATED {supported} OPTIONAL,
harq-ReportOnPUCCH-r16 ENUMERATED {supported} OPTIONAL
} OPTIONAL,
--15-4
sync-Sidelink-r16 SEQUENCE {
gNB-Sync-r16 ENUMERATED {supported} OPTIONAL,
gNB-GNSS-UE-SyncWithPriorityOnGNB-ENB-r16 ENUMERATED {supported} OPTIONAL,
gNB-GNSS-UE-SyncWithPriorityOnGNSS-r16 ENUMERATED {supported} OPTIONAL
} OPTIONAL,
--15-10
sl-Tx-256QAM-r16 ENUMERATED {supported} OPTIONAL,
--15-11
psfch-FormatZeroSidelink-r16 SEQUENCE {
psfch-RxNumber ENUMERATED {n5, n15, n25, n32, n35, n45, n50, n64},
psfch-TxNumber ENUMERATED {n4, n8, n16}
} OPTIONAL,
--15-12
lowSE-64QAM-MCS-TableSidelink-r16 ENUMERATED {supported} OPTIONAL,
--15-15
enb-sync-Sidelink-r16 ENUMERATED {supported} OPTIONAL,
...,
[[
--15-3
sl-TransmissionMode2-r16 SEQUENCE {
harq-TxProcessModeTwoSidelink-r16 ENUMERATED {n8, n16},
scs-CP-PatternTxSidelinkModeTwo-r16 ENUMERATED {supported} OPTIONAL,
dl-openLoopPC-Sidelink-r16 ENUMERATED {supported} OPTIONAL
} OPTIONAL,
--15-5
congestionControlSidelink-r16 SEQUENCE {
cbr-ReportSidelink-r16 ENUMERATED {supported} OPTIONAL,
cbr-CR-TimeLimitSidelink-r16 ENUMERATED {time1, time2}
} OPTIONAL,
--15-22
fewerSymbolSlotSidelink-r16 ENUMERATED {supported} OPTIONAL,
--15-23
sl-openLoopPC-RSRP-ReportSidelink-r16 ENUMERATED {supported} OPTIONAL,
--13-1
sl-Rx-256QAM-r16 ENUMERATED {supported} OPTIONAL
]],
[[
ue-PowerClassSidelink-r16 ENUMERATED {pc2, pc3, pc5-v1820, spare5, spare4, spare3, spare2, spare1}
OPTIONAL
]],
[[
--32-4a
sl-TransmissionMode2-RandomResourceSelection-r17 SEQUENCE {
harq-TxProcessModeTwoSidelink-r17 ENUMERATED {n8, n16},
scs-CP-PatternTxSidelinkModeTwo-r17 CHOICE {
fr1-r17 SEQUENCE {
scs-15kHz-r17 BIT STRING (SIZE (16)) OPTIONAL,
scs-30kHz-r17 BIT STRING (SIZE (16)) OPTIONAL,
scs-60kHz-r17 BIT STRING (SIZE (16)) OPTIONAL
},
fr2-r17 SEQUENCE {
scs-60kHz-r17 BIT STRING (SIZE (16)) OPTIONAL,
scs-120kHz-r17 BIT STRING (SIZE (16)) OPTIONAL
}
} OPTIONAL,
extendedCP-Mode2Random-r17 ENUMERATED {supported} OPTIONAL,
dl-openLoopPC-Sidelink-r17 ENUMERATED {supported} OPTIONAL
} OPTIONAL,
--32-4b
sync-Sidelink-v1710 SEQUENCE {
sync-GNSS-r17 ENUMERATED {supported} OPTIONAL,
gNB-Sync-r17 ENUMERATED {supported} OPTIONAL,
gNB-GNSS-UE-SyncWithPriorityOnGNB-ENB-r17 ENUMERATED {supported} OPTIONAL,
gNB-GNSS-UE-SyncWithPriorityOnGNSS-r17 ENUMERATED {supported} OPTIONAL
} OPTIONAL,
--32-4c
enb-sync-Sidelink-v1710 ENUMERATED {supported} OPTIONAL,
--32-5a-2
rx-IUC-Scheme1-PreferredMode2Sidelink-r17 ENUMERATED {supported} OPTIONAL,
--32-5a-3
rx-IUC-Scheme1-NonPreferredMode2Sidelink-r17 ENUMERATED {supported} OPTIONAL,
--32-5b-2
rx-IUC-Scheme2-Mode2Sidelink-r17 ENUMERATED {n5, n15, n25, n32, n35, n45, n50, n64} OPTIONAL,
--32-6-1
rx-IUC-Scheme1-SCI-r17 ENUMERATED {supported} OPTIONAL,
--32-6-2
rx-IUC-Scheme1-SCI-ExplicitReq-r17 ENUMERATED {supported} OPTIONAL
]],
[[
sharedSpectrumChAccessParamsSidelinkPerBand-r18 SharedSpectrumChAccessParamsSidelinkPerBand-r18 OPTIONAL,
--R1 41-1-1 Common SL-PRS processing capability in a SL BWP
sl-PRS-CommonProcCapabilityPerBand-r18 SEQUENCE {
maxSL-PRS-Bandwidth-r18 CHOICE {
fr1-r18 ENUMERATED {mhz5, mhz10, mhz20, mhz40, mhz50, mhz80, mhz100},
fr2-r18 ENUMERATED {mhz50, mhz100, mhz200, mhz400}
},
maxNumOfActiveSL-PRS-ResourcesInOneSlot-r18 CHOICE {
fr1-r18 ENUMERATED {n1, n2, n4, n6, n8, n12, n16, n24},
fr2-r18 ENUMERATED {n1, n2, n4, n6, n8, n12, n16, n24, n32, n48, n64, n128}
},
maxNumOfSlotsWithActiveSL-PRS-Resources-r18 CHOICE {
fr1-r18 ENUMERATED {n1, n2, n3, n4, n6, n8},
fr2-r18 ENUMERATED {n1, n2, n4, n8, n12, n16, n24, n32, n48, n64}
},
minTimeAfterEndofSlotCarryActiveSL-PRS-Resources-r18 ENUMERATED {ms20, ms30, ms40, ms50, ms80, ms100, ms160}
} OPTIONAL,
-- R1 41-1-2: Receiving SL-PRS in a shared resource pool
sl-PRS-RxInSharedResourcePool-r18 ENUMERATED {supported} OPTIONAL,
-- R1 41-1-3: Receiving SL-PRS in a dedicated resource pool
sl-PRS-RxInDedicatedResourcePool-r18 SEQUENCE {
numOfSupportedRxPSCCH-PerSlot-r18 ENUMERATED {value1, value2},
supportedCP-TypeFor60kHzSCS-r18 ENUMERATED {ncp, ncpAndECP}
} OPTIONAL,
-- R1 41-1-4a: Transmitting SL-PRS in a shared resource pool
sl-PRS-TxInSharedResourcePool-r18 ENUMERATED {supported} OPTIONAL,
-- R1 41-1-4b: Transmitting SL-PRS scheme 1 in a dedicated resource pool
sl-PRS-TxScheme1InDedicatedResourcePool-r18 ENUMERATED {supported} OPTIONAL,
-- R1 41-1-4c: Transmitting SL-PRS mode 2 in a dedicated resource pool
sl-PRS-TxScheme2InDedicatedResourcePool-r18 ENUMERATED {supported} OPTIONAL,
-- R1 41-1-5: SL-PRS congestion control in a dedicated resource pool
sl-PRS-CongestionCtrl-r18 ENUMERATED {cpt1, cpt2, cpt3} OPTIONAL,
-- R1 41-1-8: Support of random selection in a dedicated resource pool
sl-PRS-TxRandomSelection-r18 ENUMERATED {supported} OPTIONAL,
-- R1 41-1-10: Support of full sensing in a dedicated resource pool
sl-PRS-TxUsingFullSensing-r18 ENUMERATED {value1, value2} OPTIONAL,
-- R1 41-1-20: Supports SL PRS Rx for a band configured with SL CA
sl-PRS-RxForBandWithSL-CA-r18 ENUMERATED {supported} OPTIONAL,
-- R1 41-1-21: Supports SL PRS Tx for a band configured with SL CA
sl-PRS-TxForBandWithSL-CA-r18 ENUMERATED {supported} OPTIONAL,
-- R1 47-s1: Transmission/Reception using dynamic resource pool sharing
sl-DynamicSharingTxRx-r18 ENUMERATED {supported} OPTIONAL,
-- R1 47-v1: NR SL communication with SL CA
sl-CA-Communication-r18 SEQUENCE {
numberOfCarriers-r18 INTEGER (2..8),
numberOfPSCCH-DecodeValueZ-r18 INTEGER (1..2),
totalBandwidth-r18 ENUMERATED {mhz20,mhz30,mhz40,mhz50,mhz60,mhz70}
} OPTIONAL,
-- R1 47-v2: Synchronization for SL CA
sl-CA-Synchronization-r18 ENUMERATED {supported} OPTIONAL,
-- R1 47-v3: PSFCH for SL CA
sl-CA-PSFCH-r18 SEQUENCE {
rx-PSFCH-Resource-r18 ENUMERATED {n5,n15,n25,n32,n35,n45,n50,n64,n100},
tx-PSFCH-Resource-r18 ENUMERATED {n4,n8,n16,n24}
} OPTIONAL,
-- R4 45-2: SL reception in intra-carrier guard band
sl-ReceptionIntraCarrierGuardBand-r18 ENUMERATED {supported} OPTIONAL
]],
[[
-- R1 41-1-17: Open loop SL pathloss based power control for SL-PRS and associated PSCCH and SL RSRP report for dedicated
-- resource pool
sl-PathlossBasedOLPC-SL-RSRP-Report-r18 ENUMERATED {supported} OPTIONAL
]]
}
RelayParameters-r17 ::= SEQUENCE {
relayUE-Operation-L2-r17 ENUMERATED {supported} OPTIONAL,
remoteUE-Operation-L2-r17 ENUMERATED {supported} OPTIONAL,
remoteUE-PathSwitchToIdleInactiveRelay-r17 ENUMERATED {supported} OPTIONAL,
...,
[[
relayUE-U2U-OperationL2-r18 ENUMERATED {supported} OPTIONAL,
remoteUE-U2U-OperationL2-r18 ENUMERATED {supported} OPTIONAL,
remoteUE-U2N-PathSwitchOperationL2-r18 ENUMERATED {supported} OPTIONAL,
multipathRemoteUE-PC5L2-r18 ENUMERATED {supported} OPTIONAL,
multipathRelayUE-N3C-r18 ENUMERATED {supported} OPTIONAL,
multipathRemoteUE-N3C-r18 ENUMERATED {supported} OPTIONAL,
remoteUE-IndirectPathAddChangeToIdleInactiveRelay-r18 ENUMERATED {supported} OPTIONAL,
pdcp-DuplicationMoreThanOneUuRLC-r18 ENUMERATED {supported} OPTIONAL,
pdcp-CADuplicationDirectpath-DRB-r18 ENUMERATED {supported} OPTIONAL,
pdcp-CADuplicationDirectpath-SRB-r18 ENUMERATED {supported} OPTIONAL,
pdcp-DuplicationMP-SplitDRB-r18 ENUMERATED {supported} OPTIONAL,
pdcp-DuplicationMP-SplitSRB-r18 ENUMERATED {supported} OPTIONAL,
directpathRLF-RecoveryViaSRB1-r18 ENUMERATED {supported} OPTIONAL,
splitDRB-WithUL-BothDirectIndirect-r18 ENUMERATED {supported} OPTIONAL
]]
}
PDCP-ParametersSidelink-r18 ::= SEQUENCE {
pdcp-DuplicationSRB-sidelink-r18 ENUMERATED {supported} OPTIONAL,
pdcp-DuplicationDRB-sidelink-r18 ENUMERATED {supported} OPTIONAL,
...
}
-- TAG-SIDELINKPARAMETERS-STOP
-- ASN1STOP
– SimultaneousRxTxPerBandPair
The IE SimultaneousRxTxPerBandPair contains the simultaneous Rx/Tx UE capability for each band pair in a band combination.
SimultaneousRxTxPerBandPair information element
-- ASN1START
-- TAG-SIMULTANEOUSRXTXPERBANDPAIR-START
SimultaneousRxTxPerBandPair ::= BIT STRING (SIZE (3..496))
-- TAG-SIMULTANEOUSRXTXPERBANDPAIR-STOP
-- ASN1STOP
– SON-Parameters
The IE SON-Parameters contains SON related parameters.
SON-Parameters information element
-- ASN1START
-- TAG-SON-PARAMETERS-START
SON-Parameters-r16 ::= SEQUENCE {
rach-Report-r16 ENUMERATED {supported} OPTIONAL,
...,
[[
rlfReportCHO-r17 ENUMERATED {supported} OPTIONAL,
rlfReportDAPS-r17 ENUMERATED {supported} OPTIONAL,
success-HO-Report-r17 ENUMERATED {supported} OPTIONAL,
twoStepRACH-Report-r17 ENUMERATED {supported} OPTIONAL,
pscell-MHI-Report-r17 ENUMERATED {supported} OPTIONAL,
onDemandSI-Report-r17 ENUMERATED {supported} OPTIONAL
]],
[[
cef-ReportRedCap-r17 ENUMERATED {supported} OPTIONAL,
rlf-ReportRedCap-r17 ENUMERATED {supported} OPTIONAL
]],
[[
spr-Report-r18 ENUMERATED {supported} OPTIONAL,
successIRAT-HO-Report-r18 ENUMERATED {supported} OPTIONAL
]]
}
-- TAG-SON-PARAMETERS-STOP
-- ASN1STOP
– SpatialRelationsSRS-Pos
The IE SpatialRelationsSRS-Pos is used to convey spatial relation for SRS for positioning related parameters.
SpatialRelationsSRS-Pos information element
-- ASN1START
-- TAG-SPATIALRELATIONSSRS-POS-START
SpatialRelationsSRS-Pos-r16 ::= SEQUENCE {
spatialRelation-SRS-PosBasedOnSSB-Serving-r16 ENUMERATED {supported} OPTIONAL,
spatialRelation-SRS-PosBasedOnCSI-RS-Serving-r16 ENUMERATED {supported} OPTIONAL,
spatialRelation-SRS-PosBasedOnPRS-Serving-r16 ENUMERATED {supported} OPTIONAL,
spatialRelation-SRS-PosBasedOnSRS-r16 ENUMERATED {supported} OPTIONAL,
spatialRelation-SRS-PosBasedOnSSB-Neigh-r16 ENUMERATED {supported} OPTIONAL,
spatialRelation-SRS-PosBasedOnPRS-Neigh-r16 ENUMERATED {supported} OPTIONAL
}
--TAG-SPATIALRELATIONSSRS-POS-STOP
-- ASN1STOP
– SRS-AllPosResourcesRRC-Inactive
The IE SRS-AllPosResourcesRRC-Inactive is used to convey SRS positioning related parameters specific for a certain band.
SRS-AllPosResourcesRRC-Inactive information element
-- ASN1START
-- TAG-SRS-ALLPOSRESOURCESRRC-INACTIVE-START
SRS-AllPosResourcesRRC-Inactive-r17 ::= SEQUENCE {
srs-PosResourcesRRC-Inactive-r17 SEQUENCE {
-- R1 27-15: Positioning SRS transmission in RRC_INACTIVE state for initial UL BWP
maxNumberSRS-PosResourceSetPerBWP-r17 ENUMERATED {n1, n2, n4, n8, n12, n16},
maxNumberSRS-PosResourcesPerBWP-r17 ENUMERATED {n1, n2, n4, n8, n16, n32, n64},
maxNumberSRS-ResourcesPerBWP-PerSlot-r17 ENUMERATED {n1, n2, n3, n4, n5, n6, n8, n10, n12, n14},
maxNumberPeriodicSRS-PosResourcesPerBWP-r17 ENUMERATED {n1, n2, n4, n8, n16, n32, n64},
maxNumberPeriodicSRS-PosResourcesPerBWP-PerSlot-r17 ENUMERATED {n1, n2, n3, n4, n5, n6, n8, n10, n12, n14},
dummy1 ENUMERATED {n1, n2, n4, n8, n16, n32, n64 },
dummy2 ENUMERATED {n1, n2, n3, n4, n5, n6, n8, n10, n12, n14}
}
}
-- TAG-SRS-ALLPOSRESOURCESRRC-INACTIVE-STOP
-- ASN1STOP
– SRS-SwitchingTimeNR
The IE SRS-SwitchingTimeNR is used to indicate the SRS carrier switching time supported by the UE for one NR band pair.
SRS-SwitchingTimeNR information element
-- ASN1START
-- TAG-SRS-SWITCHINGTIMENR-START
SRS-SwitchingTimeNR ::= SEQUENCE {
switchingTimeDL ENUMERATED {n0us, n30us, n100us, n140us, n200us, n300us, n500us, n900us} OPTIONAL,
switchingTimeUL ENUMERATED {n0us, n30us, n100us, n140us, n200us, n300us, n500us, n900us} OPTIONAL
}
-- TAG-SRS-SWITCHINGTIMENR-STOP
-- ASN1STOP
– SRS-SwitchingTimeEUTRA
The IE SRS-SwitchingTimeEUTRA is used to indicate the SRS carrier switching time supported by the UE for one E-UTRA band pair.
SRS-SwitchingTimeEUTRA information element
-- ASN1START
-- TAG-SRS-SWITCHINGTIMEEUTRA-START
SRS-SwitchingTimeEUTRA ::= SEQUENCE {
switchingTimeDL ENUMERATED {n0, n0dot5, n1, n1dot5, n2, n2dot5, n3, n3dot5, n4, n4dot5, n5, n5dot5, n6, n6dot5, n7}
OPTIONAL,
switchingTimeUL ENUMERATED {n0, n0dot5, n1, n1dot5, n2, n2dot5, n3, n3dot5, n4, n4dot5, n5, n5dot5, n6, n6dot5, n7}
OPTIONAL
}
-- TAG-SRS-SWITCHINGTIMEEUTRA-STOP
-- ASN1STOP
– SupportedAggBandwidth
The IE SupportedAggBandwidth is used to indicate the aggregated bandwidth supported by the UE.
SupportedAggBandwidth information element
-- ASN1START
-- TAG-SUPPORTEDAGGBANDWIDTH-START
SupportedAggBandwidth-r17 ::= CHOICE {
fr1-r17 ENUMERATED {mhz20, mhz30, mhz35, mhz40, mhz50, mhz60, mhz70, mhz80, mhz90, mhz100, mhz110, mhz120, mhz130, mhz140,
mhz150, mhz160, mhz180, mhz200, mhz220, mhz230, mhz250, mhz280, mhz290, mhz300, mhz350, mhz400, mhz450,
mhz500, mhz600, mhz700, mhz800, spare1},
fr2-r17 ENUMERATED {mhz200, mhz300, mhz400, mhz500, mhz600, mhz700, mhz800, mhz900, mhz1000, mhz1100, mhz1200, mhz1300, mhz1400,
mhz1500, mhz1600, mhz1700, mhz1800, mhz1900, mhz2000, mhz2100, mhz2200, mhz2300, mhz2400, spare9, spare8,
spare7, spare6, spare5, spare4, spare3, spare2, spare1}
}
-- TAG-SUPPORTEDAGGBANDWIDTH-STOP
-- ASN1STOP
– SupportedBandwidth
The IE SupportedBandwidth is used to indicate the channel bandwidth supported by the UE on one carrier of a band of a band combination.
SupportedBandwidth information element
-- ASN1START
-- TAG-SUPPORTEDBANDWIDTH-START
SupportedBandwidth ::= CHOICE {
fr1 ENUMERATED {mhz5, mhz10, mhz15, mhz20, mhz25, mhz30, mhz40, mhz50, mhz60, mhz80, mhz100},
fr2 ENUMERATED {mhz50, mhz100, mhz200, mhz400}
}
SupportedBandwidth-v1700 ::= CHOICE {
fr1-r17 ENUMERATED {mhz5, mhz10, mhz15, mhz20, mhz25, mhz30, mhz35, mhz40, mhz45, mhz50, mhz60, mhz70, mhz80, mhz90, mhz100},
fr2-r17 ENUMERATED {mhz50, mhz100, mhz200, mhz400, mhz800, mhz1600, mhz2000}
}
SupportedBandwidth-v1840 ::= ENUMERATED {mhz3}
-- TAG-SUPPORTEDBANDWIDTH-STOP
-- ASN1STOP
– UE-BasedPerfMeas-Parameters
The IE UE-BasedPerfMeas-Parameters contains UE-based performance measurement parameters.
UE-BasedPerfMeas-Parameters information element
-- ASN1START
-- TAG-UE-BASEDPERFMEAS-PARAMETERS-START
UE-BasedPerfMeas-Parameters-r16 ::= SEQUENCE {
barometerMeasReport-r16 ENUMERATED {supported} OPTIONAL,
immMeasBT-r16 ENUMERATED {supported} OPTIONAL,
immMeasWLAN-r16 ENUMERATED {supported} OPTIONAL,
loggedMeasBT-r16 ENUMERATED {supported} OPTIONAL,
loggedMeasurements-r16 ENUMERATED {supported} OPTIONAL,
loggedMeasWLAN-r16 ENUMERATED {supported} OPTIONAL,
orientationMeasReport-r16 ENUMERATED {supported} OPTIONAL,
speedMeasReport-r16 ENUMERATED {supported} OPTIONAL,
gnss-Location-r16 ENUMERATED {supported} OPTIONAL,
ulPDCP-Delay-r16 ENUMERATED {supported} OPTIONAL,
...,
[[
sigBasedLogMDT-OverrideProtect-r17 ENUMERATED {supported} OPTIONAL,
multipleCEF-Report-r17 ENUMERATED {supported} OPTIONAL,
excessPacketDelay-r17 ENUMERATED {supported} OPTIONAL,
earlyMeasLog-r17 ENUMERATED {supported} OPTIONAL
]],
[[
loggedMDT-PNI-NPN-r18 ENUMERATED {supported} OPTIONAL,
loggedMDT-SNPN-r18 ENUMERATED {supported} OPTIONAL
]]
}
-- TAG-UE-BASEDPERFMEAS-PARAMETERS-STOP
-- ASN1STOP
– UE-CapabilityRAT-ContainerList
The IE UE-CapabilityRAT-ContainerList contains a list of radio access technology specific capability containers.
UE-CapabilityRAT-ContainerList information element
-- ASN1START
-- TAG-UE-CAPABILITYRAT-CONTAINERLIST-START
UE-CapabilityRAT-ContainerList ::= SEQUENCE (SIZE (0..maxRAT-CapabilityContainers)) OF UE-CapabilityRAT-Container
UE-CapabilityRAT-Container ::= SEQUENCE {
rat-Type RAT-Type,
ue-CapabilityRAT-Container OCTET STRING
}
-- TAG-UE-CAPABILITYRAT-CONTAINERLIST-STOP
-- ASN1STOP
– UE-CapabilityRAT-RequestList
The IE UE-CapabilityRAT-RequestList is used to request UE capabilities for one or more RATs from the UE.
UE-CapabilityRAT-RequestList information element
-- ASN1START
-- TAG-UE-CAPABILITYRAT-REQUESTLIST-START
UE-CapabilityRAT-RequestList ::= SEQUENCE (SIZE (1..maxRAT-CapabilityContainers)) OF UE-CapabilityRAT-Request
UE-CapabilityRAT-Request ::= SEQUENCE {
rat-Type RAT-Type,
capabilityRequestFilter OCTET STRING OPTIONAL, -- Need N
...
}
-- TAG-UE-CAPABILITYRAT-REQUESTLIST-STOP
-- ASN1STOP
– UE-CapabilityRequestFilterCommon
The IE UE-CapabilityRequestFilterCommon is used to request filtered UE capabilities. The filter is common for all capability containers that are requested.
UE-CapabilityRequestFilterCommon information element
-- ASN1START
-- TAG-UE-CAPABILITYREQUESTFILTERCOMMON-START
UE-CapabilityRequestFilterCommon ::= SEQUENCE {
mrdc-Request SEQUENCE {
omitEN-DC ENUMERATED {true} OPTIONAL, -- Need N
includeNR-DC ENUMERATED {true} OPTIONAL, -- Need N
includeNE-DC ENUMERATED {true} OPTIONAL -- Need N
} OPTIONAL, -- Need N
...,
[[
codebookTypeRequest-r16 SEQUENCE {
type1-SinglePanel-r16 ENUMERATED {true} OPTIONAL, -- Need N
type1-MultiPanel-r16 ENUMERATED {true} OPTIONAL, -- Need N
type2-r16 ENUMERATED {true} OPTIONAL, -- Need N
type2-PortSelection-r16 ENUMERATED {true} OPTIONAL -- Need N
} OPTIONAL, -- Need N
uplinkTxSwitchRequest-r16 ENUMERATED {true} OPTIONAL -- Need N
]],
[[
requestedCellGrouping-r16 SEQUENCE (SIZE (1..maxCellGroupings-r16)) OF CellGrouping-r16 OPTIONAL -- Cond NRDC
]],
[[
fallbackGroupFiveRequest-r17 ENUMERATED {true} OPTIONAL -- Need N
]],
[[
lowerMSDRequest-r18 SEQUENCE {
pc1dot5-r18 ENUMERATED {true} OPTIONAL, -- Need N
pc2-r18 ENUMERATED {true} OPTIONAL, -- Need N
pc3-r18 ENUMERATED {true} OPTIONAL -- Need N
} OPTIONAL -- Need N
]]
}
CellGrouping-r16 ::= SEQUENCE {
mcg-r16 SEQUENCE (SIZE (1..maxBands)) OF FreqBandIndicatorNR,
scg-r16 SEQUENCE (SIZE (1..maxBands)) OF FreqBandIndicatorNR,
mode-r16 ENUMERATED {sync, async}
}
-- TAG-UE-CAPABILITYREQUESTFILTERCOMMON-STOP
-- ASN1STOP
– UE-CapabilityRequestFilterNR
The IE UE-CapabilityRequestFilterNR is used to request filtered UE capabilities.
UE-CapabilityRequestFilterNR information element
-- ASN1START
-- TAG-UE-CAPABILITYREQUESTFILTERNR-START
UE-CapabilityRequestFilterNR ::= SEQUENCE {
frequencyBandListFilter FreqBandList OPTIONAL, -- Need N
nonCriticalExtension UE-CapabilityRequestFilterNR-v1540 OPTIONAL
}
UE-CapabilityRequestFilterNR-v1540 ::= SEQUENCE {
srs-SwitchingTimeRequest ENUMERATED {true} OPTIONAL, -- Need N
nonCriticalExtension UE-CapabilityRequestFilterNR-v1710 OPTIONAL
}
UE-CapabilityRequestFilterNR-v1710 ::= SEQUENCE {
sidelinkRequest-r17 ENUMERATED {true} OPTIONAL, -- Need N
nonCriticalExtension SEQUENCE {} OPTIONAL
}
-- TAG-UE-CAPABILITYREQUESTFILTERNR-STOP
-- ASN1STOP
– UE-MRDC-Capability
The IE UE-MRDC-Capability is used to convey the UE Radio Access Capability Parameters for MR-DC, see TS 38.306 [26].
UE-MRDC-Capability information element
-- ASN1START
-- TAG-UE-MRDC-CAPABILITY-START
UE-MRDC-Capability ::= SEQUENCE {
measAndMobParametersMRDC MeasAndMobParametersMRDC OPTIONAL,
phy-ParametersMRDC-v1530 Phy-ParametersMRDC OPTIONAL,
rf-ParametersMRDC RF-ParametersMRDC,
generalParametersMRDC GeneralParametersMRDC-XDD-Diff OPTIONAL,
fdd-Add-UE-MRDC-Capabilities UE-MRDC-CapabilityAddXDD-Mode OPTIONAL,
tdd-Add-UE-MRDC-Capabilities UE-MRDC-CapabilityAddXDD-Mode OPTIONAL,
fr1-Add-UE-MRDC-Capabilities UE-MRDC-CapabilityAddFRX-Mode OPTIONAL,
fr2-Add-UE-MRDC-Capabilities UE-MRDC-CapabilityAddFRX-Mode OPTIONAL,
featureSetCombinations SEQUENCE (SIZE (1..maxFeatureSetCombinations)) OF FeatureSetCombination OPTIONAL,
pdcp-ParametersMRDC-v1530 PDCP-ParametersMRDC OPTIONAL,
lateNonCriticalExtension OCTET STRING (CONTAINING UE-MRDC-Capability-v15g0) OPTIONAL,
nonCriticalExtension UE-MRDC-Capability-v1560 OPTIONAL
}
-- Regular non-critical extensions:
UE-MRDC-Capability-v1560 ::= SEQUENCE {
receivedFilters OCTET STRING (CONTAINING UECapabilityEnquiry-v1560-IEs) OPTIONAL,
measAndMobParametersMRDC-v1560 MeasAndMobParametersMRDC-v1560 OPTIONAL,
fdd-Add-UE-MRDC-Capabilities-v1560 UE-MRDC-CapabilityAddXDD-Mode-v1560 OPTIONAL,
tdd-Add-UE-MRDC-Capabilities-v1560 UE-MRDC-CapabilityAddXDD-Mode-v1560 OPTIONAL,
nonCriticalExtension UE-MRDC-Capability-v1610 OPTIONAL
}
UE-MRDC-Capability-v1610 ::= SEQUENCE {
measAndMobParametersMRDC-v1610 MeasAndMobParametersMRDC-v1610 OPTIONAL,
generalParametersMRDC-v1610 GeneralParametersMRDC-v1610 OPTIONAL,
pdcp-ParametersMRDC-v1610 PDCP-ParametersMRDC-v1610 OPTIONAL,
nonCriticalExtension UE-MRDC-Capability-v1700 OPTIONAL
}
UE-MRDC-Capability-v1700 ::= SEQUENCE {
measAndMobParametersMRDC-v1700 MeasAndMobParametersMRDC-v1700,
nonCriticalExtension UE-MRDC-Capability-v1730 OPTIONAL
}
UE-MRDC-Capability-v1730 ::= SEQUENCE {
measAndMobParametersMRDC-v1730 MeasAndMobParametersMRDC-v1730 OPTIONAL,
nonCriticalExtension UE-MRDC-Capability-v1800 OPTIONAL
}
UE-MRDC-Capability-v1800 ::= SEQUENCE {
-- R4 33-2: Support network control of requirementnetwork applicability for UE supporting interBandMRDC-WithOverlapDL-Bands-r16
requirementTypeIndication-r18 ENUMERATED {supported} OPTIONAL,
measAndMobParametersMRDC-v1810 MeasAndMobParametersMRDC-v1810 OPTIONAL,
nonCriticalExtension SEQUENCE {} OPTIONAL
}
-- Late non-critical extensions:
UE-MRDC-Capability-v15g0 ::= SEQUENCE {
rf-ParametersMRDC-v15g0 RF-ParametersMRDC-v15g0 OPTIONAL,
nonCriticalExtension UE-MRDC-Capability-v15n0 OPTIONAL
}
UE-MRDC-Capability-v15n0 ::= SEQUENCE {
rf-ParametersMRDC-v15n0 RF-ParametersMRDC-v15n0 OPTIONAL,
-- Following field is only for REL-15 late non-critical extensions
lateNonCriticalExtension OCTET STRING OPTIONAL,
nonCriticalExtension UE-MRDC-Capability-v16e0 OPTIONAL
}
UE-MRDC-Capability-v16e0 ::= SEQUENCE {
rf-ParametersMRDC-v16e0 RF-ParametersMRDC-v16e0 OPTIONAL,
nonCriticalExtension SEQUENCE {} OPTIONAL
}
UE-MRDC-CapabilityAddXDD-Mode ::= SEQUENCE {
measAndMobParametersMRDC-XDD-Diff MeasAndMobParametersMRDC-XDD-Diff OPTIONAL,
generalParametersMRDC-XDD-Diff GeneralParametersMRDC-XDD-Diff OPTIONAL
}
UE-MRDC-CapabilityAddXDD-Mode-v1560 ::= SEQUENCE {
measAndMobParametersMRDC-XDD-Diff-v1560 MeasAndMobParametersMRDC-XDD-Diff-v1560 OPTIONAL
}
UE-MRDC-CapabilityAddFRX-Mode ::= SEQUENCE {
measAndMobParametersMRDC-FRX-Diff MeasAndMobParametersMRDC-FRX-Diff
}
GeneralParametersMRDC-XDD-Diff ::= SEQUENCE {
splitSRB-WithOneUL-Path ENUMERATED {supported} OPTIONAL,
splitDRB-withUL-Both-MCG-SCG ENUMERATED {supported} OPTIONAL,
srb3 ENUMERATED {supported} OPTIONAL,
dummy ENUMERATED {supported} OPTIONAL,
...
}
GeneralParametersMRDC-v1610 ::= SEQUENCE {
f1c-OverEUTRA-r16 ENUMERATED {supported} OPTIONAL
}
-- TAG-UE-MRDC-CAPABILITY-STOP
-- ASN1STOP
– UE-NR-Capability
The IE UE-NR-Capability is used to convey the NR UE Radio Access Capability Parameters, see TS 38.306 [26].
UE-NR-Capability information element
-- ASN1START
-- TAG-UE-NR-CAPABILITY-START
UE-NR-Capability ::= SEQUENCE {
accessStratumRelease AccessStratumRelease,
pdcp-Parameters PDCP-Parameters,
rlc-Parameters RLC-Parameters OPTIONAL,
mac-Parameters MAC-Parameters OPTIONAL,
phy-Parameters Phy-Parameters,
rf-Parameters RF-Parameters,
measAndMobParameters MeasAndMobParameters OPTIONAL,
fdd-Add-UE-NR-Capabilities UE-NR-CapabilityAddXDD-Mode OPTIONAL,
tdd-Add-UE-NR-Capabilities UE-NR-CapabilityAddXDD-Mode OPTIONAL,
fr1-Add-UE-NR-Capabilities UE-NR-CapabilityAddFRX-Mode OPTIONAL,
fr2-Add-UE-NR-Capabilities UE-NR-CapabilityAddFRX-Mode OPTIONAL,
featureSets FeatureSets OPTIONAL,
featureSetCombinations SEQUENCE (SIZE (1..maxFeatureSetCombinations)) OF FeatureSetCombination OPTIONAL,
lateNonCriticalExtension OCTET STRING (CONTAINING UE-NR-Capability-v15c0) OPTIONAL,
nonCriticalExtension UE-NR-Capability-v1530 OPTIONAL
}
-- Regular non-critical Rel-15 extensions:
UE-NR-Capability-v1530 ::= SEQUENCE {
fdd-Add-UE-NR-Capabilities-v1530 UE-NR-CapabilityAddXDD-Mode-v1530 OPTIONAL,
tdd-Add-UE-NR-Capabilities-v1530 UE-NR-CapabilityAddXDD-Mode-v1530 OPTIONAL,
dummy ENUMERATED {supported} OPTIONAL,
interRAT-Parameters InterRAT-Parameters OPTIONAL,
inactiveState ENUMERATED {supported} OPTIONAL,
delayBudgetReporting ENUMERATED {supported} OPTIONAL,
nonCriticalExtension UE-NR-Capability-v1540 OPTIONAL
}
UE-NR-Capability-v1540 ::= SEQUENCE {
sdap-Parameters SDAP-Parameters OPTIONAL,
overheatingInd ENUMERATED {supported} OPTIONAL,
ims-Parameters IMS-Parameters OPTIONAL,
fr1-Add-UE-NR-Capabilities-v1540 UE-NR-CapabilityAddFRX-Mode-v1540 OPTIONAL,
fr2-Add-UE-NR-Capabilities-v1540 UE-NR-CapabilityAddFRX-Mode-v1540 OPTIONAL,
fr1-fr2-Add-UE-NR-Capabilities UE-NR-CapabilityAddFRX-Mode OPTIONAL,
nonCriticalExtension UE-NR-Capability-v1550 OPTIONAL
}
UE-NR-Capability-v1550 ::= SEQUENCE {
reducedCP-Latency ENUMERATED {supported} OPTIONAL,
nonCriticalExtension UE-NR-Capability-v1560 OPTIONAL
}
UE-NR-Capability-v1560 ::= SEQUENCE {
nrdc-Parameters NRDC-Parameters OPTIONAL,
receivedFilters OCTET STRING (CONTAINING UECapabilityEnquiry-v1560-IEs) OPTIONAL,
nonCriticalExtension UE-NR-Capability-v1570 OPTIONAL
}
UE-NR-Capability-v1570 ::= SEQUENCE {
nrdc-Parameters-v1570 NRDC-Parameters-v1570 OPTIONAL,
nonCriticalExtension UE-NR-Capability-v1610 OPTIONAL
}
-- Late non-critical Rel-15 extensions:
UE-NR-Capability-v15c0 ::= SEQUENCE {
nrdc-Parameters-v15c0 NRDC-Parameters-v15c0 OPTIONAL,
partialFR2-FallbackRX-Req ENUMERATED {true} OPTIONAL,
nonCriticalExtension UE-NR-Capability-v15g0 OPTIONAL
}
UE-NR-Capability-v15g0 ::= SEQUENCE {
rf-Parameters-v15g0 RF-Parameters-v15g0 OPTIONAL,
nonCriticalExtension UE-NR-Capability-v15j0 OPTIONAL
}
UE-NR-Capability-v15j0 ::= SEQUENCE {
-- Following field is only for REL-15 late non-critical extensions
lateNonCriticalExtension OCTET STRING OPTIONAL,
nonCriticalExtension UE-NR-Capability-v16a0 OPTIONAL
}
-- Regular non-critical Rel-16 extensions:
UE-NR-Capability-v1610 ::= SEQUENCE {
inDeviceCoexInd-r16 ENUMERATED {supported} OPTIONAL,
dl-DedicatedMessageSegmentation-r16 ENUMERATED {supported} OPTIONAL,
nrdc-Parameters-v1610 NRDC-Parameters-v1610 OPTIONAL,
powSav-Parameters-r16 PowSav-Parameters-r16 OPTIONAL,
fr1-Add-UE-NR-Capabilities-v1610 UE-NR-CapabilityAddFRX-Mode-v1610 OPTIONAL,
fr2-Add-UE-NR-Capabilities-v1610 UE-NR-CapabilityAddFRX-Mode-v1610 OPTIONAL,
bh-RLF-Indication-r16 ENUMERATED {supported} OPTIONAL,
directSN-AdditionFirstRRC-IAB-r16 ENUMERATED {supported} OPTIONAL,
bap-Parameters-r16 BAP-Parameters-r16 OPTIONAL,
referenceTimeProvision-r16 ENUMERATED {supported} OPTIONAL,
sidelinkParameters-r16 SidelinkParameters-r16 OPTIONAL,
highSpeedParameters-r16 HighSpeedParameters-r16 OPTIONAL,
mac-Parameters-v1610 MAC-Parameters-v1610 OPTIONAL,
mcgRLF-RecoveryViaSCG-r16 ENUMERATED {supported} OPTIONAL,
resumeWithStoredMCG-SCells-r16 ENUMERATED {supported} OPTIONAL,
resumeWithStoredSCG-r16 ENUMERATED {supported} OPTIONAL,
resumeWithSCG-Config-r16 ENUMERATED {supported} OPTIONAL,
ue-BasedPerfMeas-Parameters-r16 UE-BasedPerfMeas-Parameters-r16 OPTIONAL,
son-Parameters-r16 SON-Parameters-r16 OPTIONAL,
onDemandSIB-Connected-r16 ENUMERATED {supported} OPTIONAL,
nonCriticalExtension UE-NR-Capability-v1640 OPTIONAL
}
UE-NR-Capability-v1640 ::= SEQUENCE {
redirectAtResumeByNAS-r16 ENUMERATED {supported} OPTIONAL,
phy-ParametersSharedSpectrumChAccess-r16 Phy-ParametersSharedSpectrumChAccess-r16 OPTIONAL,
nonCriticalExtension UE-NR-Capability-v1650 OPTIONAL
}
UE-NR-Capability-v1650 ::= SEQUENCE {
mpsPriorityIndication-r16 ENUMERATED {supported} OPTIONAL,
highSpeedParameters-v1650 HighSpeedParameters-v1650 OPTIONAL,
nonCriticalExtension UE-NR-Capability-v1690 OPTIONAL
}
UE-NR-Capability-v1690 ::= SEQUENCE {
ul-RRC-Segmentation-r16 ENUMERATED {supported} OPTIONAL,
nonCriticalExtension UE-NR-Capability-v1700 OPTIONAL
}
-- Late non-critical extensions from Rel-16 onwards:
UE-NR-Capability-v16a0 ::= SEQUENCE {
phy-Parameters-v16a0 Phy-Parameters-v16a0 OPTIONAL,
rf-Parameters-v16a0 RF-Parameters-v16a0 OPTIONAL,
nonCriticalExtension UE-NR-Capability-v16c0 OPTIONAL
}
UE-NR-Capability-v16c0 ::= SEQUENCE {
rf-Parameters-v16c0 RF-Parameters-v16c0 OPTIONAL,
nonCriticalExtension UE-NR-Capability-v16d0 OPTIONAL
}
UE-NR-Capability-v16d0 ::= SEQUENCE {
featureSets-v16d0 FeatureSets-v16d0 OPTIONAL,
nonCriticalExtension UE-NR-Capability-v16j0 OPTIONAL
}
UE-NR-Capability-v16j0 ::= SEQUENCE {
rf-Parameters-v16j0 RF-Parameters-v16j0 OPTIONAL,
-- Following field is only for REL-16 late non-critical extensions
lateNonCriticalExtension OCTET STRING OPTIONAL,
nonCriticalExtension UE-NR-Capability-v17b0 OPTIONAL
}
-- Regular non-critical Rel-17 extensions:
UE-NR-Capability-v1700 ::= SEQUENCE {
inactiveStatePO-Determination-r17 ENUMERATED {supported} OPTIONAL,
highSpeedParameters-v1700 HighSpeedParameters-v1700 OPTIONAL,
powSav-Parameters-v1700 PowSav-Parameters-v1700 OPTIONAL,
mac-Parameters-v1700 MAC-Parameters-v1700 OPTIONAL,
ims-Parameters-v1700 IMS-Parameters-v1700 OPTIONAL,
measAndMobParameters-v1700 MeasAndMobParameters-v1700,
appLayerMeasParameters-r17 AppLayerMeasParameters-r17 OPTIONAL,
redCapParameters-r17 RedCapParameters-r17 OPTIONAL,
ra-SDT-r17 ENUMERATED {supported} OPTIONAL,
srb-SDT-r17 ENUMERATED {supported} OPTIONAL,
gNB-SideRTT-BasedPDC-r17 ENUMERATED {supported} OPTIONAL,
bh-RLF-DetectionRecovery-Indication-r17 ENUMERATED {supported} OPTIONAL,
nrdc-Parameters-v1700 NRDC-Parameters-v1700 OPTIONAL,
bap-Parameters-v1700 BAP-Parameters-v1700 OPTIONAL,
musim-GapPreference-r17 ENUMERATED {supported} OPTIONAL,
musimLeaveConnected-r17 ENUMERATED {supported} OPTIONAL,
mbs-Parameters-r17 MBS-Parameters-r17,
nonTerrestrialNetwork-r17 ENUMERATED {supported} OPTIONAL,
ntn-ScenarioSupport-r17 ENUMERATED {gso, ngso} OPTIONAL,
sliceInfoforCellReselection-r17 ENUMERATED {supported} OPTIONAL,
ue-RadioPagingInfo-r17 UE-RadioPagingInfo-r17 OPTIONAL,
-- R4 17-2 UL gap pattern for Tx power management
ul-GapFR2-Pattern-r17 BIT STRING (SIZE (4)) OPTIONAL,
ntn-Parameters-r17 NTN-Parameters-r17 OPTIONAL,
nonCriticalExtension UE-NR-Capability-v1740 OPTIONAL
}
UE-NR-Capability-v1740 ::= SEQUENCE {
redCapParameters-v1740 RedCapParameters-v1740,
nonCriticalExtension UE-NR-Capability-v1750 OPTIONAL
}
UE-NR-Capability-v1750 ::= SEQUENCE {
crossCarrierSchedulingConfigurationRelease-r17 ENUMERATED {supported} OPTIONAL,
nonCriticalExtension UE-NR-Capability-v1800 OPTIONAL
}
-- Late non-critical extensions from Rel-17 onwards:
UE-NR-Capability-v17b0 ::= SEQUENCE {
mac-Parameters-v17b0 MAC-Parameters-v17b0 OPTIONAL,
rf-Parameters-v17b0 RF-Parameters-v17b0 OPTIONAL,
ul-RRC-MaxCapaSegments-r17 ENUMERATED {supported} OPTIONAL,
nonCriticalExtension UE-NR-Capability-v17c0 OPTIONAL
}
UE-NR-Capability-v17c0 ::= SEQUENCE {
mac-Parameters-v17c0 MAC-Parameters-v17c0 OPTIONAL,
nonCriticalExtension SEQUENCE {} OPTIONAL
}
-- Regular non-critical Rel-18 extensions:
UE-NR-Capability-v1800 ::= SEQUENCE {
airToGroundNetwork-r18 ENUMERATED {supported} OPTIONAL,
eRedCapParameters-r18 ERedCapParameters-r18 OPTIONAL,
ncr-Parameters-r18 NCR-Parameters-r18 OPTIONAL,
softSatelliteSwitchResyncNTN-r18 ENUMERATED {supported} OPTIONAL,
hardSatelliteSwitchResyncNTN-r18 ENUMERATED {supported} OPTIONAL,
mt-SDT-r18 ENUMERATED {supported} OPTIONAL,
mt-SDT-NTN-r18 ENUMERATED {supported} OPTIONAL,
inDeviceCoexIndAutonomousDenial-r18 ENUMERATED {supported} OPTIONAL,
inDeviceCoexIndFDM-r18 ENUMERATED {supported} OPTIONAL,
inDeviceCoexIndTDM-r18 ENUMERATED {supported} OPTIONAL,
musim-GapPriorityPreference-r18 ENUMERATED {supported} OPTIONAL,
musim-CapabilityRestriction-r18 ENUMERATED {supported} OPTIONAL,
dummy ENUMERATED {supported} OPTIONAL,
ra-InsteadCG-SDT-r18 ENUMERATED {supported} OPTIONAL,
resumeAfterSDT-Release-r18 ENUMERATED {supported} OPTIONAL,
ul-TrafficInfo-r18 ENUMERATED {supported} OPTIONAL,
aerialParameters-r18 AerialParameters-r18 OPTIONAL,
--R4 40-2: beam steering
ntn-VSAT-AntennaType-r18 ENUMERATED {electronic, mechanical} OPTIONAL,
--R4 40-1: VSAT UE type in NTN
ntn-VSAT-MobilityType-r18 ENUMERATED {fixed, mobile} OPTIONAL,
ntn-Parameters-v1820 NTN-Parameters-v1820 OPTIONAL,
nonCriticalExtension UE-NR-Capability-v1830 OPTIONAL
}
UE-NR-Capability-v1830 ::= SEQUENCE {
sib19-Support-r18 ENUMERATED {supported} OPTIONAL,
nonCriticalExtension SEQUENCE{} OPTIONAL
}
UE-NR-CapabilityAddXDD-Mode ::= SEQUENCE {
phy-ParametersXDD-Diff Phy-ParametersXDD-Diff OPTIONAL,
mac-ParametersXDD-Diff MAC-ParametersXDD-Diff OPTIONAL,
measAndMobParametersXDD-Diff MeasAndMobParametersXDD-Diff OPTIONAL
}
UE-NR-CapabilityAddXDD-Mode-v1530 ::= SEQUENCE {
eutra-ParametersXDD-Diff EUTRA-ParametersXDD-Diff
}
UE-NR-CapabilityAddFRX-Mode ::= SEQUENCE {
phy-ParametersFRX-Diff Phy-ParametersFRX-Diff OPTIONAL,
measAndMobParametersFRX-Diff MeasAndMobParametersFRX-Diff OPTIONAL
}
UE-NR-CapabilityAddFRX-Mode-v1540 ::= SEQUENCE {
ims-ParametersFRX-Diff IMS-ParametersFRX-Diff OPTIONAL
}
UE-NR-CapabilityAddFRX-Mode-v1610 ::= SEQUENCE {
powSav-ParametersFRX-Diff-r16 PowSav-ParametersFRX-Diff-r16 OPTIONAL,
mac-ParametersFRX-Diff-r16 MAC-ParametersFRX-Diff-r16 OPTIONAL
}
BAP-Parameters-r16 ::= SEQUENCE {
flowControlBH-RLC-ChannelBased-r16 ENUMERATED {supported} OPTIONAL,
flowControlRouting-ID-Based-r16 ENUMERATED {supported} OPTIONAL
}
BAP-Parameters-v1700 ::= SEQUENCE {
bapHeaderRewriting-Rerouting-r17 ENUMERATED {supported} OPTIONAL,
bapHeaderRewriting-Routing-r17 ENUMERATED {supported} OPTIONAL
}
MBS-Parameters-r17 ::= SEQUENCE {
maxMRB-Add-r17 INTEGER (1..16) OPTIONAL
}
-- TAG-UE-NR-CAPABILITY-STOP
-- ASN1STOP
– UE-RadioPagingInfo
The IE UE-RadioPagingInfo contains UE capability information needed for paging.
UE-RadioPagingInfo information element
-- ASN1START
-- TAG-UE-RADIOPAGINGINFO-START
UE-RadioPagingInfo-r17 ::= SEQUENCE {
-- R1 29-1: Paging enhancement
pei-SubgroupingSupportBandList-r17 SEQUENCE (SIZE (1..maxBands)) OF FreqBandIndicatorNR OPTIONAL,
...
}
-- TAG-UE-RADIOPAGINGINFO-STOP
-- ASN1STOP
|